Introduction
Thank you for choosing the Jomaa Wireless Trackball Mouse. This manual provides detailed instructions for setting up, operating, and maintaining your device. Please read it carefully to ensure optimal performance and longevity of your mouse.

Figure 1: Jomaa Wireless Trackball Mouse
Key Features:
- Thumb Control Trackball: Navigate with precision using your thumb, ideal for limited desk space.
- Ergonomic Design: Designed for comfort, reducing wrist strain during extended use.
- Triple Connectivity: Connects to up to three devices via 2.4G wireless (USB receiver), Bluetooth 5.0, and Bluetooth 4.0.
- Rechargeable Battery: Built-in Type-C rechargeable battery offers long-lasting power.
- Silent Clicks: Enjoy a quiet working environment with noiseless buttons.
- Adjustable DPI: Three DPI levels (1000/1600/2400) for customizable cursor sensitivity.
- Wide Compatibility: Supports Windows, Mac, Android, and iPad operating systems.
Package Contents
Please check the package for the following items:
- Jomaa Wireless Trackball Mouse
- USB Receiver (stored in the mouse)
- Type-C Charging Cable
- User Manual (this document)
Product Overview

Figure 2: Mouse Components
- Forward Button
- Backward Button
- DPI Button
- 2.4G/Bluetooth Mode Switch Button
- Scroll Wheel
- Detachable Trackball
- Skin-friendly Surface
- Charging Indicator
- Mode Indicator Light
- Sensor
- Type-C Charging Port
- Power Switch
- USB Receiver
Setup
System Requirements:
- Windows 8, Windows 10, or higher version
- Mac OS x 10.10 or higher version
- Android 4.3 or higher
Connecting Your Mouse:
The Jomaa Wireless Trackball Mouse offers three connection modes: 2.4G Wireless, Bluetooth 5.0 (BT1), and Bluetooth 4.0 (BT2). You can connect to up to three different devices and switch between them easily.

Figure 3: Connecting to Multiple Devices
- Power On: Locate the Power Switch (12) on the bottom of the mouse and slide it to the "ON" position.
- Select Connection Mode: Press the 2.4G/Bluetooth Mode Switch Button (4) to cycle through the modes. The Mode Indicator Light (9) will show the currently selected mode:
- 1 (Green Light): 2.4G Wireless Mode
- 2 (Blue Light): Bluetooth 1 (BT5.0) Mode
- 3 (Red Light): Bluetooth 2 (BT4.0) Mode
- 2.4G Wireless Connection:
- Switch the mouse to 2.4G Wireless Mode (Green light).
- Take out the USB Receiver (13) from its storage slot on the bottom of the mouse.
- Plug the USB Receiver into an available USB port on your computer.
- The mouse should connect automatically.
- Bluetooth Connection (BT1 or BT2):
- Switch the mouse to either Bluetooth 1 (Blue light) or Bluetooth 2 (Red light) mode.
- Press and hold the 2.4G/Bluetooth Mode Switch Button (4) for 3-5 seconds until the corresponding mode indicator light (Blue or Red) starts flashing rapidly. This indicates the mouse is in pairing mode.
- On your device (PC, laptop, tablet, iPad, Android device), go to Bluetooth settings.
- Search for "BT5.0 Mouse" (for BT1) or "BT4.0 Mouse" (for BT2) and select it to pair.
- Once paired, the indicator light will stop flashing and remain solid for a few seconds before turning off to save power.

Figure 4: Device Compatibility
Operating Instructions
Basic Operation:
- Thumb Control: Use your thumb to roll the Detachable Trackball (6) to move the cursor on the screen. This allows for precise control without moving the entire mouse.
- Left/Right Click: Standard left and right click functions.
- Scroll Wheel (5): Scroll up or down to navigate documents and web pages.
- Forward/Backward Buttons (1, 2): Use these buttons for quick navigation in web browsers or file explorers.

Figure 5: Thumb Control for Cursor Movement
Adjusting DPI Sensitivity:
The mouse features 3 adjustable DPI levels (1000/1600/2400) to suit your preference for cursor speed and precision.
- Press the DPI Button (3) to cycle through the available DPI settings.
- Each press will change the sensitivity, allowing you to find the optimal speed for your tasks.
Switching Between Connected Devices:
If you have connected the mouse to multiple devices (e.g., one via 2.4G, one via BT1, one via BT2), you can switch between them with a single click.
- Briefly press the 2.4G/Bluetooth Mode Switch Button (4) to switch to the next connected device.
- The Mode Indicator Light (9) will illuminate briefly to show which mode is active.

Figure 6: Superior Precise Control
Maintenance
Charging the Mouse:
The mouse is equipped with a built-in rechargeable battery. When the battery is low, the Charging Indicator (8) may flash or the mouse's performance might degrade.

Figure 7: Type-C Charging Port
- Connect the provided Type-C charging cable to the Type-C Charging Port (11) on the front of the mouse.
- Plug the other end of the cable into a USB power source (e.g., computer USB port, USB wall adapter).
- The Charging Indicator (8) will illuminate during charging and turn off when fully charged.
- A full charge can last approximately one month with typical use.
Cleaning the Trackball:
Over time, dust and debris can accumulate around the trackball, affecting its smoothness and precision. Regular cleaning is recommended.
- Turn off the mouse using the Power Switch (12).
- Gently push the trackball out from the opening on the bottom of the mouse.
- Use a soft, lint-free cloth (like a glasses cleaning cloth) to wipe the trackball clean.
- Also, clean the inside of the trackball cavity, paying attention to the small sensors.
- Once clean, reinsert the trackball into its socket until it clicks into place.
Troubleshooting
- Mouse not responding:
- Ensure the mouse is powered on.
- Check battery level and charge if necessary.
- For 2.4G mode, ensure the USB receiver is securely plugged in and the mouse is in 2.4G mode.
- For Bluetooth mode, ensure the mouse is in the correct Bluetooth mode (BT1 or BT2) and successfully paired with your device. Try re-pairing if necessary.
- Try connecting to a different USB port or device to rule out port/device issues.
- Trackball movement is not smooth or precise:
- This is often due to dust or debris. Refer to the "Cleaning the Trackball" section in Maintenance.
- Bluetooth connection issues:
- Ensure your device's Bluetooth is enabled.
- Make sure the mouse is in pairing mode (flashing blue/red light).
- Remove previous pairings of the mouse from your device's Bluetooth settings and try pairing again.
- Ensure the mouse is within the effective range of your device (typically up to 10 meters).
- DPI button not changing sensitivity:
- Ensure the mouse is powered on and connected.
- Press the DPI button firmly. If it still doesn't respond, try restarting the mouse.
Specifications
| Feature | Detail |
|---|---|
| Brand | JOMAA |
| Model | Wireless Trackball Mouse |
| Connectivity | 2.4G Wireless, Bluetooth 5.0 (BT1), Bluetooth 4.0 (BT2) |
| Operation Mode | Trackball (Thumb Control) |
| DPI Levels | 1000 / 1600 / 2400 (Adjustable) |
| Number of Buttons | 6 (Left, Right, Scroll Wheel, DPI, Forward, Backward) |
| Power Type | Rechargeable (Built-in Battery) |
| Charging Port | Type-C |
| Hand Orientation | Right |
| Compatibility | Windows 8/10+, Mac OS x 10.10+, Android 4.3+, iPad |
| Certifications | CE, RoHS, KC |
| Package Dimensions (approx.) | 8 cm (L) x 5 cm (W) x 3 cm (H) |
| Package Weight (approx.) | 0.3 kg |
User Tips
- Optimal Ergonomics: The ergonomic design is intended to keep your hand in a natural, comfortable position. Ensure your wrist is straight and relaxed while using the trackball to maximize comfort and reduce strain.
- Space-Saving: Since the cursor is controlled by the thumb trackball, the mouse does not need to be moved. This makes it ideal for use in confined spaces, on uneven surfaces, or while traveling.
- Multi-Device Efficiency: Take advantage of the triple connectivity to seamlessly switch between your computer, tablet, and smartphone with a single button press, enhancing your workflow.
- Regular Cleaning: To maintain smooth trackball performance, make it a habit to clean the trackball and its cavity regularly, especially if you notice any stickiness or reduced responsiveness.

Figure 8: Ergonomic Design for Comfort

Figure 9: Versatile Usage Scenarios
Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original retailer or the manufacturer directly. Please retain your proof of purchase for any warranty claims.