Introduction
This manual provides detailed instructions for the operation and maintenance of your retrosun BN59-01315N remote control. Designed for seamless compatibility with various Samsung QD OLED 4K Smart TV models, this remote offers direct use without complex setup. It features infrared control, sensitive keys, and a strong signal for reliable performance.
Product overview video demonstrating the remote control's features.
Setup
The BN59-01315N remote control is designed for direct use with compatible Samsung QD OLED 4K Smart TVs without requiring any complex programming or pairing steps. Simply install the batteries, and it's ready to operate your television.
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards or in the direction indicated by an arrow to open it.
- Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery cover by sliding it back into position until it clicks securely.

Front and back view of the remote control, highlighting the battery compartment.
Initial Use
Once batteries are installed, point the remote control towards your Samsung TV. The remote should function immediately. No additional setup or code entry is required.

The remote control is ready for direct use without setting.
Operating Instructions
The BN59-01315N remote control provides intuitive access to your Samsung TV's functions. Below is a guide to its primary buttons:

Front view of the remote control with key features.
- Power Button (●): Turns the TV on or off.
- SOURCE Button: Changes the input source (e.g., HDMI 1, HDMI 2, TV).
- Number Pad (0-9): Directly selects channels or enters numerical inputs.
- TTX/MIX Button: Activates Teletext or mixes Teletext with TV picture.
- PRE-CH Button: Returns to the previous channel.
- Volume Up/Down (+/- VOL): Adjusts the TV's volume.
- MUTE Button: Mutes or unmutes the TV sound.
- Channel Up/Down (CH ▲/▼): Changes TV channels.
- CH LIST Button: Displays the channel list.
- Netflix Button: Direct access to the Netflix application.
- Prime Video Button: Direct access to the Prime Video application.
- Samsung TV Plus Button: Direct access to Samsung TV Plus.
- Disney+ Button: Direct access to the Disney+ application.
- Directional Pad (Up, Down, Left, Right): Navigates menus and selects items.
- Enter Button (Center of D-Pad): Confirms selections.
- RETURN Button: Returns to the previous screen or menu.
- EXIT Button: Exits the current menu or application.
- Colored Buttons (A, B, C, D): Functionality varies by application or TV menu.
- SETTINGS Button: Opens the TV's settings menu.
- INFO Button: Displays information about the current program or input.
- AD/SUBT Button: Activates Audio Description or Subtitles.
- Play/Pause, Stop, Fast Forward, Rewind Buttons: Controls media playback.

Key button identification on the remote control.
Maintenance
To ensure the longevity and optimal performance of your remote control, follow these maintenance guidelines:
- Cleaning: Wipe the remote control regularly with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA). Do not mix old and new batteries, or different types of batteries.
- Storage: Store the remote control in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If the remote will not be used for an extended period, remove the batteries to prevent leakage.
- Avoid Drops and Impacts: Protect the remote from physical damage by avoiding drops and impacts.
Troubleshooting
If you encounter issues with your remote control, try the following solutions:
- Remote Not Responding:
- Check if the batteries are correctly inserted with the correct polarity (+/-).
- Replace the batteries with fresh ones.
- Ensure there are no obstructions between the remote control and the TV's infrared receiver.
- Make sure you are within the effective operating range and pointing the remote directly at the TV.
- Specific Buttons Not Working:
- Clean the remote control, especially around the problematic buttons, to remove any dirt or debris that might be interfering with their function.
- If only certain buttons are unresponsive after checking batteries and cleaning, the remote might be faulty and require replacement.
- Weak Signal:
- Ensure the batteries are not low.
- Reduce the distance between the remote and the TV.
- Remove any potential sources of infrared interference (e.g., strong lights, other electronic devices).
Specifications

Product description and material details.
| Feature | Detail |
|---|---|
| Model Number | BN59-01315N |
| Brand Name | retrosun |
| Use | TV |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 1 |
| Support APP | No |
| Package | Yes |
| Origin | Mainland China |
| Certification | CE |
| Color | Black |
| Material | Plastic, ABS |
User Tips
- Line of Sight: Always ensure a clear line of sight between the remote control and your TV's infrared receiver for optimal performance.
- Battery Life: For best results, use high-quality alkaline AAA batteries. If the remote is used infrequently, consider removing batteries to prevent corrosion.
- Keep it Clean: Regularly clean the remote to prevent dust and grime from affecting button responsiveness.
Warranty and Support
Warranty Information
This retrosun BN59-01315N remote control comes with a 12 MONTHS Manufacturer's Limited Warranty for defective items. This warranty excludes items damaged due to misuse or physical alteration after receipt. In case of a defect, it must be reported within the warranty period, providing your order number and a clear description of the defect.
Customer Support
For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Provide your product model number (BN59-01315N) and a detailed description of your issue for prompt support.