1. Safety Information
Please read all instructions carefully before operating the device. Improper installation or use may cause damage to the device or vehicle, and may lead to accidents. Keep this manual for future reference.
- Ensure the vehicle is parked safely before performing any operations that require visual attention.
- Do not operate the device in a way that distracts you from driving.
- Professional installation is recommended for optimal performance and safety.
- Always disconnect the vehicle's battery before starting any electrical work.
- Ensure all wiring is correctly connected to prevent short circuits or damage.
2. Product Overview
The XIMA Android Car Multimedia Player is a versatile 2-DIN head unit designed to enhance your in-car entertainment and navigation experience. It features a high-performance 8-Core processor, QLED display, and supports various connectivity options.
Figure 2.1: XIMA Android Car Multimedia Player with navigation.
Key Features:
- Operating System: Android (version may vary, e.g., Android 14)
- Processor: 8-Core (e.g., UIS7862S)
- RAM/ROM Options: 1GB+32GB, 2GB+32GB, 2GB+64GB, 4GB+32GB, 4GB+64GB, 6GB+128GB, 8GB+256GB
- Display: QLED 1280*720 resolution (7", 9", 10.1" sizes available)
- Connectivity: 4G LTE, 5G WiFi, Bluetooth 5.0/5.4
- Audio: Built-in HIFI DSP (e.g., ADAU1701/ROHM32107 or BU32107/AK7604VQ), Subwoofer output
- Special Features: Built-in GPS, Mobile Phone Mirror Link, MP3/MP4/WMA/JPEG playback, Voice Control (optional), CarPlay, Android Auto, Reversing Input, Split Screen, Steering Wheel Control, Can-Bus support.
- Material: ABS+
- Item Weight: 1.3kg
- Voltage: 12 V
Figure 2.2: Overview of key features.
3. Installation
3.1 Before Installation
Before proceeding with the full installation of the product into your car, it is highly recommended to test the unit first. Due to potential impacts during long transit, the product's functionality might be affected. Testing ensures the unit is working correctly before you commit to the full installation process.
3.2 Rear Interface Description (Wiring Diagram)
The following diagram illustrates the rear interface and wiring connections for the multimedia player. Ensure all connections are made accurately according to your vehicle's specifications.
Figure 3.1: Rear Interface Wiring Diagram.
Wiring Details:
- Power Plug (10A):
- Yellow (BATTERY): Constant Power Supply +12V
- Red (ACC): Ignition Switch
- Black (GND): Ground Wire/B-
- Orange (ILLUMINATION): Illuminate Backlight
- Pink (REVERSE): Reversing camera control line
- Brown (KEY2): Steering Wheel Control-2
- Orange/black striped (KEY1): Steering Wheel Control-1
- Blue (ANT): Auto Antenna Power
- F-CAM (VIDEO-IN-2): Video Input 2 (Front Camera Input)
- AUX R IN: Right Audio Input
- AUX L IN: Left Audio Input
- VIDEO-IN-1: Video Input 1
- VIDEO OUT: Video Output
- FR OUT: Front Right Audio Output
- FL OUT: Front Left Audio Output
- SUB WOOF: Subwoofer Output
- MIC: Microphone Input
- AMP CONT: Amplifier Control
- R-CAM: Reversing Camera Input
- USB1/2: USB Port
- Protocol Box: Only use when needed
Important Notes for Wiring:
- When the yellow line B+ and the red line ACC have a 12V positive power at the same time, the unit can be turned on normally.
- The yellow line B+ keeps the power on and the machine has a memory function.
- 8 speaker cables: Each speaker cable cannot be grounded, cannot be shared, and must not touch other lines. Otherwise, there will be no sound output, distorted sound, or the machine may overheat.
3.3 CANBUS Connection
CANBUS connection is essential for integrating the multimedia player with your vehicle's existing systems, such as steering wheel controls and vehicle information display.
Figure 3.2: CANBUS Connection for High-End Models.
Figure 3.3: CANBUS Connection for Low-End Models.
Attention: If both the CANBUS box and the black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off. Ensure only one method is used if applicable.
3.4 Reversing Camera Installation
Proper installation of the reversing camera ensures safe parking and maneuvering. Follow the wiring instructions carefully.
Figure 3.4: Reversing Camera Installation Diagram.
Camera Wiring Steps:
- Find the reverse control line (pink wire) on the unit's power line. Connect this line to the positive 12V pole. The screen will turn blue when reverse is engaged.
- Locate the CAM video input interface at the back of the unit.
- Connect the camera's red power wire to the positive pole of the reverse lamp and the black ground wire to the negative pole.
- Connect the camera's yellow video cable to the CAM video input interface on the unit.
- The red line coming out of the video cable should be connected to the reverse control line of the power line.
Note: If the reversing camera is not installed, do not connect the REVERSE/BACK cable to any place. Leave it unconnected. Otherwise, the machine may not display properly or may enter reverse mode automatically, causing malfunction.
4. Initial Setup
4.1 Learning Steering Wheel Controls
To configure your vehicle's steering wheel controls with the multimedia player:
Figure 4.1: Steering Wheel Control Learning Interface.
- Press and hold a button on your original car's steering wheel.
- On the multimedia player, find the corresponding button icon for that function.
- Click the icon to change its color. Once the color changes, the learning process is successful.
4.2 Bluetooth Pairing
To connect your mobile phone via Bluetooth:
- Turn on the multimedia player.
- Enable Bluetooth on your mobile phone.
- Search for the multimedia player's Bluetooth name (e.g., "xima") on your phone.
- Select the device and click