1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ISUDAR T75 Series Android 12 Car Radio. Designed for seamless integration with compatible Renault models, this multimedia system offers advanced features including Android 12, an Octa-core CPU, Carplay, Android Auto, GPS navigation, and more. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
2. Safety Precautions
- For any issues during installation or usage, please contact our after-sales support.
- Installation should be performed under professional guidance, as it involves electronic equipment and automotive accessories that may pose risks such as electric shock, injury, or other hazards if handled by untrained individuals.
- Ensure the power is disconnected before installation.
- This product is designed for vehicles with a 12V DC power system only. Do not install it on vehicles with a different power supply, as it may damage the product or cause a fire due to over-voltage.
- Turn off the car and disconnect the positive battery terminal before installation. Insulate all wires properly after installation to prevent short circuits that can lead to product damage or fires.
- Avoid using the car audio system for an extended period after turning off the engine to prevent draining the battery power.
- If the product gets exposed to water damage or foreign matter while driving, park the vehicle in a safe location, turn off the ignition switch (ACC OFF) immediately, and consult your dealer or customer service. Do not use the product in this condition, as it may result in fire, electric shock, or other failures.
- In case of smoke, strange noises, unusual odors, or any other abnormal signs during normal use, immediately turn off the power and consult your dealer or customer service. Do not use the product in this condition, as it may result in fire, electric shock, or other failures.
- Please place the product out of reach of children to avoid unnecessary harm.
- The manufacturer reserves the right to provide the final explanation.
3. Setup & Installation
3.1. Wiring Diagram
Refer to the diagram below for proper wiring connections. Ensure all connections are secure.

Image: Detailed wiring diagram showing connections for power, CANBUS, GPS, USB, and RCA cables.
3.2. Power Plug Definition
The power connector has specific pin assignments. Ensure correct connections to avoid damage.
| Pin | Function | Description |
|---|---|---|
| 1 | GND | Ground |
| 2 | B+ | Battery +12V |
| 3 | ACC | Accessory Power |
| 4 | ILL | Illumination |
| 5 | BACK UP | Camera Back up |
| 6 | WHEEL1 | Steering Wheel Control 1 |
| 7 | WHEEL 2 | Steering Wheel Control 2 |
| 8 | ANT+12V | Antenna Power |
| 9 | FR- | Front Right Speaker- |
| 10 | RL- | Rear Left Speaker- |
| 11 | FR+ | Front Right Speaker+ |
| 12 | RL+ | Rear Left Speaker+ |
| 13 | FL- | Front Left Speaker- |
| 14 | RR+ | Rear Right Speaker+ |
| 15 | FL+ | Front Left Speaker+ |
| 16 | RR- | Rear Right Speaker- |
3.3. GPS Antenna Installation
The GPS Antenna is recommended to be installed on the dashboard or below the windshield for optimal signal reception.
3.4. Frame Installation Tip
If applicable to your vehicle, transfer the snap clip from the original frame to the new one.
3.5. CANBUS Setup
Setting the correct CANBUS type allows the car radio to better integrate with the vehicle information system. This step is only necessary if your car radio includes a CANBUS Box and requires setup. If not, you can skip this step entirely.
- Connect the device to Wi-Fi.
- Go to: Settings > Factory (Code: 123456) > Select models.
- Select: CanBox > Cars for > Models for > Config.
For example, if your CANBUS box shows the brand SS (Simple Soft), then choose: 03: Simple Soft > 87: JEEP > 11: 16 Renegade > LowConfig.
3.6. Reverse Camera Connection
For Original Camera: Connect the yellow Port "A" to the yellow Port "B" as shown in the diagram. "A" is Reverse Camera Output, "B" is Reverse Camera Input.
For Aftermarket Reverse Camera (With Canbus):
- Connect the yellow port "B" to the yellow port "C". The Camera red wire connects with the power cable wire "BACK" or "Reverse" (Camera Back UP: The 5th Pin on the "Power Connector" is the brown or pink wire).
- The red wire connects with red wire. The black wire connects with the Car reversing light negative electrode.
For Aftermarket Reverse Camera (Without Canbus):
- Connect the yellow port "B" to the yellow port "C". The Camera red wire connects with the power cable wire "BACK" or "Reverse" (Camera Back UP: The 5th Pin on the "Power Connector" is the brown or pink wire).
- The red wire connects with red wire and connects with the Car reversing light positive electrode. The black wire connects with the Car reversing light negative electrode.

Image: Diagram showing connections for original and aftermarket reverse cameras.
4. Operating Instructions
4.1. System Settings
4.1.1. Steering Wheel Control
- Click the Steering Wheel icon to open the settings page.
- Click “START”, press the corresponding button on the screen, and then press the physical button on the steering wheel. After learning, the button will be highlighted.
- After setting all the necessary buttons, click “END” to complete and save.
Note: For car radios equipped with CANBUS, the steering wheel control buttons are directly decoded by CANBUS and do not require setting in this application. If your car radio is equipped with CANBUS, but the steering wheel control buttons still do not work after setting the CANBUS type, please contact after-sales support for reset instructions.
4.1.2. Logo Setting
To customize your startup image:
- Prepare the image (Bitmap: 32bit, Resolution: 1024*600, 1280*720, or other depending on screen resolution; Format: BMP, PNG, JPG).
- Copy the logo image to a USB flash drive.
- Insert the USB flash drive into the USB port of the car radio.
- Click “Settings > Factory (Code:123456) > LOGO Setting”, select the image, and click "Logo setting".
4.1.3. Animation Boot Logo
To add a custom boot animation:
- Prepare the animation (Bitmap: 32 bit; Resolution: 1024*600, 1280*720, or other; Format: Zip).
- Copy the boot animation compressed package to the USB root directory interface.
- Insert the U-disk into the device USB port.
- Click on "Boot Animation > Pull down the status bar and click the "Menu" > An import box will pop up > Click "Import from external storage" and a password box will pop up > Enter the password "Topway". The Animation in the USB will be displayed. Select the zip and click "Confirm".
4.1.4. Radio Setting
- Adjust the radio reception area: Settings > Factory (Code:123456) > Select radio region > Dedault Radio Area.
- RDS: Settings > Factory (Code:123456) > Config info > RDS > ON/OFF.
4.1.5. Button Color
Click "Color" > Select the desired physical button color. If you don't have the Color app, click "Settings > Factory (Code:123456) > Config info > Color > ON/OFF".
4.2. Connectivity
4.2.1. Wired & Wireless Carplay
To use Carplay:
- Click the Tlink5 APK to enter the page.
- Click on the Setting icon to access Carplay & Android Auto settings.
Wired connection:
- Turn off the WiFi and Bluetooth of the phone.
- Use a 4 pin USB cable to connect.
Wireless connection:
- Turn on WiFi and Bluetooth of your iPhone.
- Find the Bluetooth of the stereo and connect it (Bluetooth name: CarKit_blink, PIN password: 0000).
- When your iPhone is connected for the first time, it will display on the phone screen: - Bluetooth Pairing Request: Click "Pair"; - Allow Contacts and Favorites Sync? : Click “Allow”; - Use CarPlay with “ZLINK” ? : Click “Use CarPlay”.
- Click the Tlink5 APK. The car stereo will display "Connecting, please wait..." and then enter the CarPlay page. After a successful Carplay connection, it will automatically switch to Wi-Fi connection.
Tips: Long press the bottom left lower corner menu key to activate Siri. Click the "Car" icon to return to the car stereo's app interface.

Image: Display of Carplay and Android Auto interfaces on the car radio screen.
4.2.2. Wired & Wireless Android Auto
To use Android Auto:
- Click the Tlink5 APK to enter the page.
Wired connection:
- Turn off the WiFi and Bluetooth of the phone.
- Use a 4 pin USB cable to connect.
- Turn on the Android Auto app on your phone.
Wireless connection:
- Go to Play Store and download the Android Auto App in your phone.
- Turn on WiFi and Bluetooth of your phone.
- Find Bluetooth of the stereo (Bluetooth name: CarKit_blink, PIN password: 0000) and connect with it.
- Turn on the Android Auto app on your phone after connecting the Bluetooth successfully.
Note:
- Please make sure that your phone supports Google services and wireless Android Auto.
- Apple CarPlay & Android Auto does not support playing video APP like YouTube due to safety considerations while driving.
- After accessing Carplay & Android Auto, if you want to exit Carplay & Android Auto and play music using Bluetooth, please turn off WiFi instead of disconnecting Bluetooth to disconnect.
4.2.3. Mirror Link
iPhone AirPlay Connection:
- Click the ZLINK APK to enter the page. Switch to the Mirror Link page by pressing the icon. Click the icon to switch wireless/wired mirroring connection.
- On the car radio, tap the iPhone icon to activate hotspot connection mode. Then, connect the car radio to your iPhone's personal hotspot.
- On your iPhone, open “Control Center”, tap “Screen Mirroring”, and select "zj-airplay”. Once connected, wireless screen mirroring will begin successfully.
Android Link Connection:
- Tap the Android icon and scan the QR code to download the app.
- Turn on your phone's BT and connect it to the car radio. After connection, turn off your phone's Wi-Fi and enable the mobile hotspot.
- Connect the car radio to your phone's hotspot. Select Wireless Connection, then enter the setup wizard.
- On your phone, tap Start Screen Mirroring. The screen will then be mirrored successfully.

Image: Split-screen display showing navigation and media playback simultaneously.
4.3. Other Features
- Network Radio: Built-in network radio with stations from 20 countries.
- On-line Weather: Real-time weather display on the main menu, updates with location.
- Voice Control: Professional version voice control with AI assistant for commands like navigation and music.
- Online Theme: Download and apply various themes (off-road, star, racing, cyberpunk) for a personalized interface.
- Built-in DSP Sound System: Enhances audio quality with smoother treble, richer midrange, and fuller bass. Supports Equalizer and Position adjustment.
- USB DVR Input: Connect a 1080P USB DVR camera to play and control its interface on the radio screen. Supports ADAS USB DVR for obstacle distance display and alarms. (DVR not included)
- AHD Rear Camera: Supports 720P AHD/RCA rear view camera with parking lines.
5. Maintenance
- Keep the screen clean using a soft, dry cloth. Avoid abrasive cleaners.
- Ensure proper ventilation around the unit to prevent overheating.
- Regularly check wiring connections for any signs of wear or looseness.
- Update software periodically to ensure optimal performance and access to new features.
6. Troubleshooting (FAQ)
6.1. Why are my steering wheel controls and rear-view camera functions not working properly?
You may need to reconfigure the Canbus type. Please contact our after-sales support for guidance on the specific Canbus settings for your vehicle model.
6.2. Black screen / can't power on.
- Press the RST button on the car stereo to reset the system.
- Check if the car stereo is receiving a stable DC12V voltage.
- Inspect the car stereo fuse to see if it is burnt out. Replace if necessary.
- Reconnect the BATT + / ACC / GND wires of the car stereo to the corresponding wires of the original car wiring.
6.3. My car has an amplifier system. Why is there no sound after installation?
- Ensure the power cable provided is compatible with your car.
- Connect the AUX cable of the power cable to the AUX cable of the RCA cable (AUX-L-IN = AUDIO OUT L; AUX-R-IN = AUDIO OUT R; AUX L = AUX IN L; AUX R = AUX IN R).
- Make sure the power cable includes a separate blue AMP Control wire, connected to the blue "AMP CONT" wire on the RCA harness.
- Turn on the amplifier switch in the settings: Enable "Always on" in the Fan app.
6.4. Why can't I play videos while driving?
For safe driving, video playback is disabled. To enable, go to: Settings > Factory (Code:8888) > Brake setting > Close.
6.5. Why does the music stop when reversing?
For safety reasons, you need to turn it on as follows: Settings > Reverse > Reversing volume control, and adjust the volume to your desired level.
6.6. How to set up automatic connection to CarPlay after connecting Bluetooth?
Settings > General > Application self start > Tlink5.
6.7. How to change between Celsius and Fahrenheit units?
First, connect your car stereo to your phone's hotspot or WiFi. Then, open the weather app. Click the gear icon in the top right corner and select your preferred temperature unit.
6.8. How to change the speed unit?
Click the "Theme" APP icon > Click the gear icon in the upper right corner > Plugin > Speed unit.
6.9. Why is the time or time zone not updating automatically?
Follow this path to set it: Settings > System > Date & Time, connect your car stereo to your phone's hotspot or WiFi and then open the "Set time automatically".
6.10. Why is my weather information and location not updated?
You need to connect the car stereo to your mobile phone hotspot or WiFi, and the weather information and location will be updated online.
6.11. The touch screen is not sensitive or the touch position is wrong.
Find a wired mouse and connect it to the USB port, then use the mouse cursor to click the following path to enter the settings: Settings > Factory (Code:123456) > Touch area key > POSITION. Then select "CALBRATION", last you need to click the screen position with your finger instead of clicking the mouse.
6.12. How to use the picture-in-picture function?
Settings > General > Video suspension window > ON.
6.13. If I don't have a factory-installed rearview camera and don't want the reversing image to be displayed when reversing, how do I turn it off?
Settings > Factory (Code: 123456) > Reverse Mode > Prohibit reversing.
6.14. How to change the language?
Settings > More > System > Languages > System Languages.
7. Specifications
| Feature | Specification |
|---|---|
| Operating System | Android 12 |
| CPU | 12NM LP 64 Bit Octa-core 1.8GHZ (T68 Series: Cortex 8*A55, T72 Series: Cortex 2*A75+6*A55) |
| RAM | 8G (also 1/2/4GB options) |
| ROM | 128G (also 32/64GB options) |
| Display Size | 9.7" |
| Resolution | 1024*768 |
| Touch Screen | Capacitive Screen, Yes |
| Din | Double Din |
| Interface | ISO |
| Voltage | 12 V |
| Item Weight | 3kg |
| Max External Memory | 2TB |
| Special Features | Wifi function, Steering wheel control, 3G/4G Network support, Can-Bus support, Built-in GPS, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Arabic, Polish, German, Russian, French, Korean, Portuguese, Japanese, THAI, Turkish, Hebrew, Greek, Spanish, Italian, English, Vietnamese |
| Built-in DVD Player | No |
| Built-in Screen | Yes |
| TF/Micro SD Slot | 0 |
| Radio Chip | TDA7708 |
| Amplifier Chip | ST7851/ST7388 |
| Microphone | Built-in |
| RDS | Support |
| Material | Metal and Plastic |
| Origin | Mainland China |
| Certification | CE |
| For Vehicle Brands/Model | Renault |
| Renault Model | Megane |
| Package Dimensions (L x W x H) | 37cm x 30cm x 14cm |
| Package Weight | 1.9kg |

Image: Comparison table of different models (VT19/BT19, T68B, T72S/T72X) and their specifications.
8. User Tips
- Always ensure you select the correct console screen option during setup for proper functionality.
- If you experience any issues, first try resetting the device using the RST button.
- For optimal GPS and Wi-Fi performance, ensure antennas are installed in clear locations (e.g., dashboard or below windshield).
- When connecting your phone for CarPlay/Android Auto, remember to turn off Wi-Fi if you want to switch to Bluetooth audio, and vice-versa, to avoid conflicts.
9. Warranty & Support
For any questions or issues regarding your ISUDAR T75 Series Car Radio, please contact our after-sales support team. You can reach us via email at xyl-supports@aliyun.com.
For further details, you may refer to the official user manual PDF: User Manual (PDF).