Xtrfy MZ1W Wireless Mouse Instruction Manual

1. Introduction

The Xtrfy MZ1W is a high-performance wireless gaming mouse designed for competitive play. Featuring a lightweight design, adjustable center of gravity, and customizable RGB lighting, it offers precision and comfort for extended gaming sessions. This manual provides detailed instructions for setting up, operating, and maintaining your MZ1W mouse.

2. Product Overview

2.1. Package Contents

• Xtrfy MZ1W Wireless Gaming Mouse
• Xtrfy EZcord® Pro Charging Cable (1.8m USB-A to USB-C)
• USB-C to USB-A Adapter
• 2.4 GHz Wireless Receiver
• Additional Interchangeable Back Shell
• User Manual (this document)

2.2. Mouse Components

1. Left Button
2. Right Button
3. Scroll Wheel & Middle Button
4. Forward Button
5. Back Button
6. Multi-function Button
7. DPI Indicator Light
8. DPI Switch Button
9. Mode Switch Lever (RGB, PR, LOD, F11)

2.3. Key Features

• Lightweight Design: Weighs approximately 61g (without cable).
• Adjustable Center of Gravity: Allows customization for different grip styles.
• Long Battery Life: Up to 75 hours of usage on a single charge.
• Xtrfy EZcord® Pro: Flexible and durable charging cable for seamless wired use.
• Interchangeable Shells: Includes a second back shell to adjust mouse height.
• High-Performance Sensor: Pixart 3370 optical gaming sensor.
• Durable Microswitches: Kailh GM 8.0 microswitches for crisp clicks.
• Advanced Processor: ARM 32-bit microcontroller for speed and stability.
• Customizable RGB Backlight: Personalize your mouse with various lighting effects.

3. Setup

3.1. Initial Charging

Before first use, connect the mouse to a USB port on your computer using the provided Xtrfy EZcord® Pro charging cable. The mouse will charge while connected. Ensure to use a computer USB port for charging to avoid potential issues.

3.2. Connecting the Mouse

The MZ1W supports both 2.4 GHz wireless and wired USB connections.

3.2.1. Wireless Connection (2.4 GHz)

1. Insert the 2.4 GHz wireless receiver into an available USB port on your computer.
2. Turn on the mouse using the power switch located on the underside.
3. The mouse should automatically connect to the receiver. If not, ensure the receiver is properly inserted and the mouse is powered on.

3.2.2. Wired Connection

Connect the Xtrfy EZcord® Pro charging cable directly from the mouse to a USB port on your computer. The mouse will function as a wired mouse and charge simultaneously.

3.3. Adjusting Center of Gravity

The MZ1W allows you to adjust the mouse's center of gravity by repositioning the internal battery. Depending on your grip style, you can move the battery forward or backward to achieve optimal balance and comfort.

1. Carefully open the mouse shell (refer to the interchangeable shells section if needed).
2. Gently slide the battery to your desired position (forward or backward).
3. Close the mouse shell securely.

3.4. Changing Back Shells

The MZ1W comes with an additional back shell, allowing you to adjust the mouse's back height to suit your preference. To change the shell:

1. Gently detach the current back shell from the mouse.
2. Align the desired back shell with the mouse body.
3. Press down firmly until it clicks into place.

4. Operating Instructions

4.1. Lighting Modes (RGB)

The MZ1W features customizable RGB lighting with several effects. Use the Mode Switch Lever (9) and Multi-function Button (6) to adjust.

1. Switching Lighting Modes:
   • Set the Mode Switch Lever (9) to RGB.
   • Press the Multi-function Button (6) to cycle through 10 lighting modes:
     • RGB Flow Mode
     • RGB Breathing Mode
     • Single Color Mode
     • Single Color Breathing Mode
     • Single Color Flow Mode
     • 7-Color Cycle Mode
     • RGB Horse Racing Mode
     • Button Response Mode
     • Heart Beat Mode
     • Turn Off Lights
2. Switching Lighting Colors (for single color modes):
   • Set the Mode Switch Lever (9) to RGB.
   • Press and hold the Left Button (1) and Right Button (2) simultaneously for 3 seconds.
3. Adjusting Lighting Brightness:
   • Set the Mode Switch Lever (9) to RGB.
   • Press the Multi-function Button (6) and simultaneously press the Forward Button (4) to increase brightness, or the Back Button (5) to decrease brightness.
   • There are 11 brightness levels (OFF, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%).
4. Adjusting Lighting Speed:
   • Set the Mode Switch Lever (9) to RGB.
   • Press the Multi-function Button (6) and simultaneously scroll the Scroll Wheel (3) up or down to adjust the lighting speed.
   • There are 5 speed levels.

4.2. Polling Rate Setting

Adjust the mouse's polling rate for responsiveness.

1. Set the Mode Switch Lever (9) to PR.
2. Press the Multi-function Button (6) to cycle through polling rates. The DPI Indicator Light (7) will show the current setting:
   • Red: 125 Hz
   • Green: 500 Hz
   • Blue: 1000 Hz

4.3. LOD (Lift-Off Distance) Setting

Configure the distance at which the mouse stops tracking when lifted.

1. Set the Mode Switch Lever (9) to LOD.
2. Press the Multi-function Button (6) to cycle through LOD settings. The DPI Indicator Light (7) will show the current setting:
   • Red: 1 mm
   • Green: 2.5 mm

4.4. Button Delay Setting

Adjust the debounce delay for mouse clicks.

1. Press and hold the Forward Button (4), Back Button (5), Left Button (1), and Right Button (2) simultaneously for 3 seconds.
2. The DPI Indicator Light (7) will flash to indicate the current delay:
   • Red: 2 ms
   • Blue: 4 ms
   • Green: 8 ms
   • Purple: 12 ms

4.5. DPI Setting

Change the mouse's sensitivity (DPI) on the fly.

1. Press the DPI Switch Button (8) to cycle through DPI levels.
2. The DPI Indicator Light (7) will display a color corresponding to the current DPI:
   • Red: 400 DPI
   • Yellow: 800 DPI
   • Green: 1600 DPI
   • Purple: 3200 DPI
   • Cyan: 7200 DPI
   • White: 16000 DPI

4.6. F11 Function

The Multi-function Button (6) can be assigned to F11 for in-game use.

1. Set the Mode Switch Lever (9) to F11.
2. The Multi-function Button (6) will now act as F11, which can be bound to custom functions in games.

4.7. Factory Reset

To restore all settings to their factory defaults:

1. Press and hold the Left Button (1), Right Button (2), and Middle Button (3) simultaneously for 5 seconds.
2. All settings will be reset.

5. Maintenance

5.1. Cleaning

• Use a soft, dry cloth to wipe the mouse surface.
• For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution.
• Avoid using harsh chemicals or abrasive materials, as these can damage the mouse.
• Regularly clean the optical sensor area to ensure accurate tracking.

5.2. Battery Care

• Charge the mouse regularly to maintain battery health.
• Avoid completely draining the battery frequently.
• Store the mouse in a cool, dry place when not in use for extended periods.

6. Troubleshooting

7. Specifications

*Note: Use a computer USB port for charging the mouse. Faults caused by non-computer charging are not covered by warranty.

8. User Tips

• Experiment with Center of Gravity: Take time to adjust the battery position to find the perfect balance for your grip and play style.
• Customize DPI and Polling Rate: Fine-tune these settings to match your in-game sensitivity and ensure optimal responsiveness.
• Utilize Interchangeable Shells: If you find the default mouse height uncomfortable, try the alternative back shell for a better fit.
• Regular Cleaning: Keep the sensor and mouse surface clean to maintain consistent performance and prolong the mouse's lifespan.
• Optimal Charging: For best battery longevity, avoid letting the mouse completely discharge frequently.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Xtrfy website or contact your local retailer. Keep your proof of purchase for any warranty claims.