1. Product Overview
The LaserPecker 4 (LP4) is a portable dual-laser engraving machine designed for versatility and precision across a wide range of materials. It integrates both a 10W 450nm blue diode laser and a 2W 1064nm infrared laser, allowing for engraving and cutting on various surfaces.
Figure 1: LaserPecker 4 LP4 Main Unit
Key Features:
- Dual Light Source Design: Combines a 10W 450nm blue light laser and a 2W 1064nm infrared laser for broad material compatibility.
- High Precision: Achieves 0.01mm ultra-high precision and 8K high resolution engraving.
- Fast Engraving Speed: Up to 4000mm/s for efficient processing.
- Extended Work Area: Standard 120mm x 160mm, expandable to 300mm x 160mm with the Slide Extension accessory.
- Rotary Engraving: Supports engraving on irregular and curved surfaces with the Rotary Extension accessory (3mm to 200mm diameter).
- Cutting Capability: Can cut up to 8mm wood and 5mm acrylic.
- User-Friendly Software: Compatible with LaserPecker Design Space and LightBurn.
- Smart Focal Correction: Proprietary algorithm for precise laser focus.
- Safety Features: Includes safety goggles, an emergency stop button, and optional fully enclosed safety cover.
2. Safety Information
Always prioritize safety when operating the LaserPecker 4. Failure to follow safety guidelines can result in serious injury or damage to the device.
- Eye Protection: Always wear the provided safety goggles to protect your eyes from laser radiation.
- Emergency Stop: Familiarize yourself with the emergency stop button and its location for immediate shutdown in case of an emergency.
- Ventilation: Ensure adequate ventilation in your workspace to dissipate fumes and smoke produced during engraving, especially when working with materials like wood or plastic.
- Flammable Materials: Keep flammable materials away from the engraving area.
- Supervision: Never leave the machine unattended during operation.
- Children and Pets: Keep children and pets away from the operating area.
- Power Supply: Use only the provided AC cord and power adapter. Ensure the power supply matches your local voltage (supports 110V/220V).
Figure 2: Safety Features
3. Setup Guide
3.1. Unboxing and Package Contents
Carefully unpack all components from the box. Verify that all items listed below are present:
Figure 3: Packing List
- LP4 Laser Host
- AC Cord & Power Adapter
- Safety Goggles
- Electric Stand Cable
- Alignment Fixtures
- Cable Organizer Clip
- Tools and Instructions
3.2. Assembly
- Place the LP4 Laser Host on a stable, flat surface.
- Connect the Electric Stand Cable to the designated ports on the laser host and the electric stand.
- Connect the AC Cord to the Power Adapter, and then plug the Power Adapter into the laser host. Finally, plug the AC Cord into a suitable power outlet.
- (Optional) If using the Slide Extension Accessory, attach it to the base of the LP4 Laser Host according to its specific instructions.
- (Optional) If using the Rotary Extension Accessory, ensure it is securely mounted and connected as per its instructions.
3.3. Software Installation
The LaserPecker 4 is compatible with LaserPecker Design Space (LDS) and LightBurn software.
- LaserPecker Design Space: Download the official app for iOS, Android, Mac, or Windows from the LaserPecker website. This software supports JPG/PNG/BMP/SVG/DWG/DXF/G-Code file formats.
- LightBurn: For advanced users, LightBurn is a mature engraving software compatible with the LP4.
Figure 4: Software Options
4. Operating Instructions
4.1. Power On and Connection
- Ensure the machine is properly assembled and connected to power.
- Press the power button to turn on the LP4. The Smart LED Touch Screen will illuminate.
- Open the LaserPecker Design Space app or LightBurn software on your device and connect to the LP4 via Bluetooth or USB.
4.2. Material Preparation
Place your material on the engraving platform. Use the provided alignment fixtures to secure smaller or irregularly shaped items.
4.3. Focusing and Preview
The LP4 features a Dual Red Light Focusing technology for quick and accurate focus.
- Place the material to be engraved under the laser head.
- The machine will automatically adjust focus using its Smart Focal Correction algorithm. You can also manually adjust the height if needed.
- Use the Outline Frame & Contour Preview Modes in the software to project the engraving area onto your material, ensuring correct placement.
Figure 5: Focusing and Preview
4.4. Selecting Laser Source
The LP4 allows you to switch between the 10W 450nm blue diode laser and the 2W 1064nm infrared laser depending on your material.
- 10W 450nm Blue Diode Laser: Ideal for engraving and cutting materials like wood, bamboo, paper, leather, drapery, plastic, acrylic, fruit, and food. It can cut thin pieces of wood and non-white paper, and leather less than 5mm thick.
- 2W 1064nm Infrared Laser: Best for engraving most metals (stainless steel, aluminum alloy, gold, silver, titanium, brass, iron) and colored plastics.
You can switch the laser source via the Smart LED Touch Screen with a simple swipe or through the software interface.
Figure 6: Dual Light Source Design
4.5. Engraving Process
- Design It: Import or create your custom artwork in the LaserPecker Design Space app or LightBurn.
- Laser It: Preview the design on your material and initiate the engraving process. Monitor the work progress in real-time via the touch screen or app.
- Enjoy It: Once complete, remove your material and admire the professional-quality results.
Figure 7: Engraving Workflow
4.6. Advanced Engraving Modes
- Batch Engraving: Utilize the Slide Extension accessory and assisted positioning tools for efficient batch processing of multiple items.
- Rotary Engraving: Attach the Rotary Extension accessory to engrave cylindrical, spherical, conical, annular, or other irregular shapes with diameters from 3mm to 200mm.
Figure 8: Rotary Engraving Setup
Figure 9: Batch Engraving with Slide Extension
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your LaserPecker 4.
- Cleaning the Lens: Gently clean the laser lens with a soft, lint-free cloth and lens cleaning solution specifically designed for optics. Do not use abrasive materials.
- Cleaning the Engraving Platform: Remove any debris, dust, or residue from the engraving platform after each use. A soft brush or vacuum cleaner can be used.
- Software Updates: Regularly check for and install software updates for LaserPecker Design Space and LightBurn to ensure compatibility and access to new features.
- Storage: When not in use, store the LP4 in a clean, dry environment, away from direct sunlight and extreme temperatures.
- Cable Management: Use the provided cable organizer clips to keep cables tidy and prevent damage.
6. Troubleshooting
If you encounter issues with your LaserPecker 4, refer to the following common troubleshooting steps:
6.1. General Issues
- Machine Not Powering On:
- Ensure the power adapter is securely connected to both the machine and a working power outlet.
- Check if the power outlet is functional.
- Software Connection Issues:
- Verify Bluetooth is enabled on your device and the LP4 is discoverable.
- If using USB, ensure the cable is properly connected and drivers are installed (if required by your OS).
- Restart both the LP4 and your device.
6.2. Engraving Quality Issues
- Faint or Incomplete Engraving:
- Check the focus. Ensure the laser is accurately focused on the material surface.
- Adjust laser power and speed settings in the software. Different materials require different settings.
- Ensure the correct laser source (blue or infrared) is selected for your material.
- Clean the laser lens if it appears dirty.
- Engraving Not Centered/Misaligned:
- Use the preview function to verify the design placement before starting the engraving.
- Ensure the material is securely placed and not shifting during operation.
- Calibrate the machine if necessary (refer to software instructions).
6.3. Laser Malfunction
- Laser Not Firing:
- Ensure the machine is not in standby or sleep mode.
- Check for any error messages on the Smart LED Touch Screen or in the software.
- If a specific laser (e.g., infrared laser) is not functioning, contact customer support for assistance.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | LASERPECKER |
| Model Number | L4 |
| LASERPECKER Model | LP4 |
| Laser Power (Blue Diode) | 10W (450nm) |
| Laser Power (Infrared) | 2W (1064nm) |
| Engraving Area (Standard) | 120mm x 160mm |
| Engraving Area (Maximum with Slide Extension) | 300mm x 160mm |
| Engraving Speed | Up to 4000mm/s (10X faster carving speed 600-12000mm/Min for 1064nm IR pulsed laser) |
| Precision | 0.01mm (8K High Resolution, 0.0009mm motion accuracy) |
| Max Cutting Depth | 8mm (wood), 5mm (acrylic) |
| Rotary Engraving Diameter | 3mm to 200mm |
| Supported Materials (Blue Laser) | Wood, bamboo, paper, leather, drapery, plastic, acrylic, fruit, food, colored glass, thin wooden boards, colored acrylic |
| Supported Materials (Infrared Laser) | Most metals (Stainless Steel, Aluminum Alloy, Gold, Silver, Titanium, Brass, Iron), colored plastics, ceramic coatings |
| Materials For Non-engraving | Metal cannot be cut and engraved to depth |
| Is Smart Device | Yes |
| Certification | EMC, CE, GS |
| Package Weight | 12kg |
| Package Dimensions (L x W x H) | 30cm x 30cm x 18cm |
Figure 10: Material Compatibility
8. Warranty and Support
The LaserPecker 4 comes with a 1-year warranty. For any technical issues, warranty claims, or support inquiries, please contact the manufacturer or your point of purchase directly. Ensure you have your purchase details and product serial number ready when contacting support.
9. User Tips
- Wide Applicability: The LP4 is suitable for a broad range of users, from beginners and hobbyists to professionals in various crafts like carpentry, baking, leatherworking, and jewelry making. Its versatility makes it a valuable tool for small businesses and DIY enthusiasts.
- Portability: The compact and portable design allows you to engrave anything, anywhere, anytime.
- Software Ease of Use: The easy-to-learn software, LaserPecker Design Space, requires no prior design experience, making it accessible for all users.
- Engraving Metal: The infrared laser is effective for engraving metals like stainless steel. For optimal and durable results on stainless steel, ensure the surface is clean and properly prepared.
- Engraving Curved Surfaces: For items like metal thermoses or rings, the Rotary Extension accessory is essential to achieve precise and consistent engraving.
- Material Preparation: For materials like white, transparent, or highly reflective surfaces, it is suggested to use a water-based whiteboard pen to paint the area black before engraving with the 450nm blue laser.
10. Product Video
Watch the official product video for a visual guide on the features and capabilities of the LaserPecker 4.
Video 1: LaserPecker 4 Product Overview
