ThermoPro TP200C Wireless Digital Indoor Outdoor Thermometer

Introduction

The ThermoPro TP200C is a wireless digital thermometer designed to monitor both indoor and outdoor temperatures simultaneously. With its remote sensor, you can easily keep track of environmental conditions up to 150 meters (500 feet) away. This manual provides detailed instructions for setting up, operating, and maintaining your device to ensure optimal performance.

Figure 1: ThermoPro TP200C Main Unit and Remote Sensor

Features

• 150M (500FT) Wireless Remote Range: Monitor temperatures from a significant distance.
• Multi-Channel Monitoring: Supports up to 3 outdoor remote sensors (one included, additional sensors sold separately) to monitor up to 4 locations (1 indoor, 3 outdoor).
• Large Digits Display: Easy-to-read temperature values.
• °C/°F Selector: Switch between Celsius and Fahrenheit readings.
• Low Battery Indicator: Alerts you when batteries need replacement.
• Versatile Mounting Options: Includes strong magnet, hanging hole, and durable stand for flexible placement.

Figure 2: Key Features of ThermoPro TP200C

Figure 3: 150M (500FT) Wireless Remote Range

Figure 4: Monitor Up To 4 Locations (1 Receiver & 3 Transmitters)

Figure 5: Compact Display with Large Digits

Figure 6: Three Accommodation Options

Package Contents

• 1 x Receiver (Main Unit)
• 1 x Remote Sensor
• 1 x Instruction Manual
• AAA batteries (included in the package)

Figure 7: Contents of the ThermoPro TP200C Package

Setup Guide

1. Install Batteries:
   • Open the battery compartment on the back of both the receiver (main unit) and the remote sensor.
   • Insert the AAA batteries (included) into both units, ensuring correct polarity (+/-).
   • Close the battery compartments securely.
2. Pairing the Units:
   • Once batteries are installed, the receiver and sensor should automatically pair. The outdoor temperature will display on the receiver.
   • If pairing is not successful, press and hold the 'CHANNEL/SYNC' button on the remote sensor for 3 seconds. Then, press the 'CHANNEL/SYNC' button on the receiver to initiate pairing.
3. Placement of the Remote Sensor:
   • Place the remote sensor outdoors in a location that is protected from direct sunlight and rain for accurate readings.
   • Ensure the sensor is within the 150M (500FT) wireless range of the receiver. Obstacles like thick walls or metal structures can reduce the range.
4. Placement of the Receiver:
   • The receiver can be placed on a table using its durable stand, mounted on a wall using the hanging hole, or attached to a metallic surface with its strong magnet.

Operating Instructions

1. Power On/Off: The units power on automatically after battery installation. There is no manual power button.
2. Temperature Display Unit (°C/°F):
   • On the receiver, press the '°C/°F' button once to switch the temperature display between Celsius and Fahrenheit.
3. Channel Selection (for multiple sensors):
   • If you have multiple remote sensors, press the 'CHANNEL/SYNC' button on the receiver to cycle through the channels (CH1, CH2, CH3).
   • The receiver will display the temperature from the selected channel.
4. Reading Temperatures:
   • The 'IN' display shows the indoor temperature measured by the receiver.
   • The 'OUT' display shows the outdoor temperature from the currently selected remote sensor channel.
5. Low Battery Indication:
   • A low battery icon will appear on the display when the batteries in either the receiver or the remote sensor need to be replaced.

Maintenance

• Cleaning: Wipe the units with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries promptly when the low battery indicator appears to ensure continuous and accurate readings.
• Storage: If storing the device for an extended period, remove the batteries from both units to prevent leakage. Store in a dry, cool place.

Troubleshooting

• No outdoor temperature reading or '---' displayed:
  • Ensure batteries are correctly installed in both the receiver and the remote sensor.
  • Check if the remote sensor is within the wireless range (150M/500FT) of the receiver.
  • Relocate the remote sensor or receiver to reduce interference from electronic devices or large metal objects.
  • Try re-pairing the units by pressing the 'CHANNEL/SYNC' button on the sensor for 3 seconds, then pressing the 'CHANNEL/SYNC' button on the receiver.
• Inaccurate temperature readings:
  • Ensure the remote sensor is not in direct sunlight or exposed to extreme weather conditions.
  • Verify that the sensor is placed in a well-ventilated area.
  • Allow both units to stabilize for 15-30 minutes after setup, as initial readings might fluctuate.

Specifications

User Tips

• For optimal wireless performance, ensure a clear line of sight between the receiver and the remote sensor. Avoid placing them near large metal objects or strong electromagnetic fields.
• When using multiple sensors, label them (e.g., CH1, CH2, CH3) to easily identify which reading corresponds to which location.
• Consider placing the outdoor sensor in a shaded, well-ventilated area to prevent direct sunlight from artificially inflating temperature readings.

Warranty and Support

ThermoPro products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your TP200C thermometer, please refer to the official ThermoPro website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.