UGREEN KU005

Contents

UGREEN Wireless Keyboard KU005 Instruction Manual

Model: KU005

1. Introduction

Thank you for choosing the UGREEN Wireless Keyboard KU005. This keyboard offers versatile connectivity with both Bluetooth 5.0/3.0 and 2.4G wireless modes, allowing you to connect up to four devices simultaneously. Its ultra-slim design, silent scissor-switch keys, and long-lasting rechargeable battery make it ideal for various computing environments.

UGREEN Wireless Keyboard with Bluetooth 3.0/5.0 and 2.4G connectivity

Image: UGREEN Wireless Keyboard highlighting Bluetooth 3.0/5.0 and 2.4G connectivity options.

2. Package Contents

Please check the package for the following items:

  • UGREEN Wireless Keyboard KU005
  • USB-C Charging Cable
  • 2.4G USB Receiver (dongle)
  • User Manual (this document)
UGREEN Ultra Slim Wireless Keyboard packaging

Image: Product packaging for the UGREEN Ultra Slim Wireless Keyboard.

3. Setup

3.1 Powering On/Off

Locate the power switch on the back of the keyboard. Slide the switch to the 'ON' position to power on the keyboard. Slide it to 'OFF' to power it down when not in use to conserve battery.

Back view of the UGREEN Wireless Keyboard showing the power switch

Image: Back view of the keyboard, indicating the power switch.

3.2 Connecting Devices (Bluetooth & 2.4G Dual-Mode)

The keyboard supports connecting up to four devices simultaneously using a combination of Bluetooth and 2.4G wireless modes. You can switch between connected devices using specific FN key combinations.

2.4G Wireless Connection:

  1. Insert the 2.4G USB receiver into an available USB port on your computer or device.
  2. Press Fn + ~ on the keyboard to activate 2.4G mode. The keyboard will automatically connect to the receiver.

Bluetooth Connection (up to 3 devices):

  1. Press Fn + 1, Fn + 2, or Fn + 3 to select a Bluetooth channel. The indicator light for the selected channel will blink, indicating it's in pairing mode.
  2. On your device (computer, tablet, smartphone), enable Bluetooth and search for new devices.
  3. Select "UGREEN Keyboard" from the list of available devices to pair.
  4. Once paired, the indicator light will stop blinking and remain solid for a few seconds.
  5. Repeat these steps for additional Bluetooth devices on channels 2 and 3.
Diagram showing multi-device connection and FN key combinations for switching

Image: Diagram illustrating how to connect up to 4 devices simultaneously using Bluetooth 3.0/5.0 and 2.4G, with FN key combinations for switching.

4. Operating Instructions

4.1 System Compatibility & Switching

The keyboard is designed with keycaps compatible with both macOS and Windows systems. The default operating mode is Windows. To switch between systems:

  • For Windows Mode (Windows, Android, Linux): Press Fn + Q or Fn + W.
  • For Mac Mode (macOS, iOS, iPadOS, tvOS): Press Fn + E.
Keycaps for Mac and Windows system, showing Fn+Q/W for switching

Image: Close-up of keyboard keycaps highlighting system-specific keys for Mac and Windows, with a note on switching systems (Fn+Q/W).

Icons representing compatibility with Windows, macOS, iOS, Linux, and Android

Image: Icons representing compatibility with Windows, macOS, iOS, Linux, and Android, along with examples of compatible Apple and Huawei devices.

4.2 Function Keys (FN Combinations)

The keyboard features a range of multimedia and system control functions accessible via the Fn key. The behavior of some keys may differ slightly between Windows and Mac modes.

FN + KeyWindows FunctionMac Function
F1Reduce screen brightnessReduce screen brightness
F2Increase screen brightnessIncrease screen brightness
F3Application switching (Alt+Tab)Switch windows (CMD+Tab)
F4Close the program (Alt+F4)Close the program (Cmd+Q)
F5Web page reloadWeb page reload (Cmd+R)
F6Turn on the computer (WIN+E)Turn on the computer (Shift-Command-C)
F7Previous trackPrevious track
F8Play / PausePlay / Pause
F9Next trackNext track
F10MuteMute
F11Volume downVolume down
F12Volume upVolume up
Home PrtScPrtSc/
End InsertInsert/
Page Up Scroll LkScroll Lk/
Page Down PausePause/
Diagram detailing FN key combinations for various functions for Windows and Mac

Image: Diagram detailing FN key combinations for various functions (brightness, app switching, media control, volume) for both Windows and Mac.

4.3 Silent Typing

The keyboard utilizes a scissor mechanism for its keys, providing a comfortable and quiet typing experience. This makes it ideal for noise-sensitive environments such as libraries, offices, or late-night work.

Person typing on the keyboard in a quiet environment, emphasizing silent clicking

Image: A person typing on the keyboard in a quiet environment, emphasizing silent clicking.

Exploded view of the scissor mechanism key structure

Image: Exploded view of the scissor mechanism key structure, highlighting silent operation, thin profile, and rechargeable battery.

4.4 Ergonomics

The keyboard features a 6° tilted stand holder, providing an ergonomic angle that helps reduce hand fatigue and promotes comfortable typing during extended use.

Side view of the keyboard showing a 6° tilt for ergonomic typing

Image: Side view of the keyboard showing a 6° tilt for ergonomic typing.

5. Maintenance

5.1 Charging the Keyboard

The UGREEN Wireless Keyboard is equipped with a 400mAh lithium polymer battery and charges via a USB-C port. A full charge can provide approximately 3 months of usage, reducing the need for frequent battery changes.

  1. Connect the provided USB-C charging cable to the keyboard's USB-C port.
  2. Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
  3. The charging indicator light will show the charging status.
  4. Once fully charged, disconnect the cable.
Diagram showing the keyboard connected via USB-C for charging, indicating battery capacity and usage time

Image: Diagram showing the keyboard connected via USB-C for charging, indicating a 400mAh battery and 3 months of work per charge.

5.2 Cleaning

To clean your keyboard, power it off and disconnect it from any devices. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. Avoid excessive moisture and do not spray cleaners directly onto the keyboard. For stubborn dirt between keys, use compressed air or a soft brush.

6. Troubleshooting

  • Keyboard not connecting/pairing:
    Ensure the keyboard is powered on. Check that the correct connection mode (2.4G or Bluetooth channel 1/2/3) is selected using the Fn key combinations. For Bluetooth, ensure your device's Bluetooth is enabled and try re-pairing. For 2.4G, ensure the USB receiver is securely plugged in.
  • Function keys not working as expected:
    Verify that the keyboard is set to the correct system mode (Windows or Mac) using Fn+Q/W/E. Some function keys may behave differently depending on the operating system.
  • Full-screen mode (Windows Alt+Enter) not working:
    The Alt+Enter combination for full-screen mode is application-dependent. If it doesn't work, check the specific application's settings or use its dedicated full-screen shortcut. This is not a keyboard malfunction.
  • No backlight:
    This keyboard model (KU005) does not feature a backlight. This is by design and not a defect.
  • Does it require a dongle or can connect to laptops without it?
    The keyboard supports both Bluetooth and 2.4G wireless. If your laptop has built-in Bluetooth, you can connect via Bluetooth without a dongle. If you prefer 2.4G wireless or your laptop lacks Bluetooth, you will need to use the provided 2.4G USB receiver (dongle).

7. Specifications

FeatureDetail
BrandUGREEN
ModelKU005
Product NameWireless Keyboard
Key Layout99 Keys
Key StructureMembrane keyboard, scissor structure
Connection MethodBluetooth 5.0/3.0, 2.4G wireless
Transmission Distance10m / 33ft (Max.)
Battery1*lithium battery 400mAh (3.7V/1.48Wh polymer)
Charging PortUSB-C (DC5±0.25V, <300mA)
MaterialMetal base + PVC keycaps
Keyboard Weight518g
Keyboard Size365mm (L) * 123mm (W) * 7.1mm (H)
Driver InstallationDrive-free
Compatible SystemsWindows 7/8.1/10/11, macOS 10.15+, iOS13.4+, iPad OS 14.0+, Linux, Chrome OS, Android5.0+
Operating Temperature-5℃ ~ 40℃
CertificationCE, FCC
Technical drawing showing the dimensions of the keyboard

Image: Technical drawing showing the dimensions of the keyboard (365mm L x 123mm W x 7.1mm H).

8. User Tips

  • Multi-Device Setup: Take advantage of the keyboard's ability to connect to four devices. Assign your primary computer to 2.4G mode for a stable connection, and use the three Bluetooth channels for your tablet, phone, or a secondary computer for quick switching.
  • Input Language: To change the input language (e.g., to Korean, Russian, or English), adjust the language settings directly within your operating system (Windows, macOS, iOS, Android). The keyboard's physical keycaps support multiple languages, but the software setting controls the input.
  • Mouse Connectivity: If you are using a wireless mouse, determine its connection type. If it's a 2.4G wireless mouse, it will likely require its own USB dongle. If it's a Bluetooth mouse, it can connect to your device via Bluetooth without needing an additional USB port, freeing up ports for other accessories or the keyboard's 2.4G dongle.

9. Warranty and Support

UGREEN offers comprehensive support for its products:

  • 1-Year Warranty: All UGREEN products come with a 1-year warranty from the date of purchase.
  • 7-Day Return Policy: You may return the product within 7 days if you encounter any quality problems.
  • 24-Hour Online Service: For any inquiries or support needs, our customer service team is available to answer all emails within 24 hours.
Graphic summarizing UGREEN's warranty and service policies

Image: Graphic summarizing UGREEN's warranty and service policies (7 days return, 24 hours delivery, 1 year warranty, 24 hours online service).

© 2023 UGREEN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.