QianLi iCopy Plus2.2 Repair Programmer Instruction Manual

1. Introduction

The QianLi iCopy Plus2.2 is a versatile repair programmer designed for iPhone maintenance and data recovery. It supports various functions including True Tone display recovery, light sensor repair, vibrator data reading and writing, battery data detection and modification, and Face ID dot matrix activation. Equipped with a 2.8-inch high-definition screen and imported custom chips, it offers high performance and ease of use, even without a PC connection for many operations. The device is designed to assist technicians in restoring original functionalities after component replacements.

2. Product Features

• 2.8-inch high-definition screen display for clear vision and improved work efficiency.
• Integrated imported custom chips for high-performance operation.
• Capable of standalone operation without a PC connection for many tasks.
• Supports hardware and software upgrades to adapt to new mobile phone models.
• Multiple language interfaces: Chinese, English, and Spanish.
• Features an original custom battery with an automatic shutdown function (20 minutes standby inactivity) to prevent power loss.
• Utilizes an iOS charging interface, allowing charging via an iOS data cable or connection to the QianLi Repair (PC software).

3. Package Contents

The standard package for the QianLi iCopy Plus2.2 typically includes the following items:

• QianLi iCopy Plus2.2 Main Unit
• Instruction Manual
• Lightning/Data Cable/Headset Detection Board
• LCD Board (for iPhone 7-11 Pro Max)
• Battery Data Recovery & Modification Board (for iPhone 6P-14PM)
• Face ID Dot Matrix Activation Test Board (for iPhone X-14 Series)
• iCopy 2nd Generation True Tone Repair Board (for iPhone 12 all series + 13/13 Mini)
• AC Adapter

Image: Overview of the iCopy Plus 2.2 host and its five main boards.

4. Setup

4.1 Powering On and Off

• To power on the device, press and hold the "OFF/ON" button for 3 seconds.
• To power off, press and hold the "OFF/ON" button for 3 seconds.
• The device has an automatic shutdown function if there is no operation for 20 minutes in standby mode.

4.2 Language Selection

• To switch languages, double-click the "Write" button. The device supports Chinese, English, and Spanish.

Image: QianLi iCopy Plus 2.2 main unit with labeled buttons (Power, Read, Write) and connection zones.

Image: iCopy Plus 2.2 displaying multiple language options (Chinese, English, Spanish).

4.3 Connecting Extension Boards

The iCopy Plus2.2 uses various extension boards for specific repair functions. Ensure the device is powered off before connecting or disconnecting any boards.

1. Carefully align the pins of the desired extension board with the corresponding connector on the iCopy Plus2.2 main unit.
2. Gently press down until the board is securely seated. Do not force the connection.
3. Once connected, power on the device to access the functions of the attached board.

Image: The iCopy Plus 2.2 main unit with different extension boards attached, illustrating modularity.

5. Operating Instructions

5.1 Lightning/Data Cable/Headset Detection

This function allows for fast detection of original, MFI (Made For iPhone), or non-original data cables and earphones.

1. Attach the Lightning/Data Cable/Headset Detection Board to the iCopy Plus2.2.
2. Connect the data cable or headset to the appropriate port on the detection board.
3. The device will display information about the cable/chips and provide a judgment on its originality.

Image: iCopy Plus 2.2 performing data cable/earphone detection, showing chip ID and assessment.

5.2 Vibrator Recovery

This function reads and writes vibrator identification codes for iPhone 7G/7P/8G/8P/X.

1. Connect the LCD Board (for 7-11 Pro Max) to the iCopy Plus2.2.
2. Connect the original vibrator to the corresponding connector on the board (ensure the vibrator is on the right side).
3. Press the "Read" button to copy the original vibrator's data.
4. Connect the new vibrator and press the "Write" button to transfer the data.

Image: iCopy Plus 2.2 displaying vibrator serial number and options for reading/writing data.

5.3 True Tone Display Recovery

This function restores True Tone display functionality after screen replacement for iPhone 8 to 11 Pro Max, and for iPhone 12/13 series with the 2nd Generation True Tone Repair Board.

5.3.1 Using Original LCD Data (iPhone 8 - 11 Pro Max)

1. Connect the LCD Board (for 7-11 Pro Max) to the iCopy Plus2.2.
2. Connect the original screen to the corresponding connector on the board.
3. Press the "Read" button to copy the original screen's chip data.
4. Connect the new screen and press the "Write" button to transfer the data.

5.3.2 True Tone Recovery without Original LCD

If the original LCD is lost or unreadable (for models after iPhone 8, requires original Front Camera and Ear Speaker), you can use the QianLi Repair PC software.

1. Connect the iCopy Plus2.2 to a PC via USB cable.
2. Launch the QianLi Repair (PC Software).
3. Connect the cell phone to the PC.
4. Read and write the LCD data through the software. The True Tone display can then be recovered by iCopy Plus.

Image: Illustration of True Tone recovery using iCopy Plus and PC software when the original LCD is unavailable.

Image: Comparison of an iPhone screen "Before True Tone Display Recovery" and "After True Tone Display Recovery by iCopy Plus".

5.3.3 Using iCopy 2nd Generation True Tone Repair Board (iPhone 12/13 Series)

For iPhone 12 all series and 13/13 Mini, use the dedicated 2nd Generation True Tone Repair Board.

1. Attach the iCopy 2nd Generation True Tone Repair Board to the iCopy Plus2.2.
2. Follow the on-screen instructions to read data from the original screen (if available) and write it to the new screen.

Image: The iCopy 2nd Generation True Tone Repair Board, compatible with iPhone 12 all series and 13/13 Mini.

5.4 Baseband Logic EEPROM Data Read & Write

This function is for reading and writing Logical Baseband data for iPhone 6 to XS Max. This operation requires soldering jump wires.

1. Connect the LCD Board (for 7-11 Pro Max) to the iCopy Plus2.2.
2. Solder jump wires to connect the motherboard's Baseband CPU chip relative pins to the corresponding zone on the board. (Refer to "Welding Spots Charts" available on the QianLi official website for precise connection points).
3. Press the "Read" and "Write" buttons simultaneously to enter the Baseband programming interface.
4. Click the "Read" button to acquire the chip data.
5. To write data, follow the on-screen prompts after reading.

Image: iCopy Plus 2.2 connected to a motherboard for Logic Base Band reading and writing, indicating the need for jump wires.

5.5 Battery Data Recovery & Modification

This function supports battery detection, data recovery, and modification for iPhone 6P to 14PM. Matching battery cables are required for 11-13 series.

1. Attach the Battery Data Recovery & Modification Board to the iCopy Plus2.2.
2. Connect the battery to the corresponding connection base on the board.
3. The device allows you to:
   • Read and write battery data.
   • Check if the battery has original electronics.
   • Modify battery data such as health, number of cycles, serial number, and capacity.
   • Copy data from one battery to another.

Image: iCopy Plus 2.2 connected to an iPhone battery, demonstrating original battery data copy and modification.

Image: QianLi Repair PC Software interface for modifying battery data, including design capacity, cycle count, and serial number.

Image: Various battery flex cables for iPhone 11, 12, 13, and 14 series, required for battery data operations.

5.6 Face ID Dot Matrix Activation

This function is for Face ID recovery and activation for iPhone X to 14 Series. Matching Face ID flex cables are required.

1. Attach the Face ID Dot Matrix Activation Test Board to the iCopy Plus2.2.
2. Connect the appropriate Face ID flex cable for the specific iPhone model to the board.
3. Follow the on-screen instructions to perform Face ID recovery and activation.

Image: The Face ID Dot Matrix Activation Test Board, compatible with iPhone X to 14 Series.

Image: Various Face ID flex cable types for iPhone X, XS/XR/XS Max, 11, 11 Pro/11 Pro Max, 12/12P, 12PM, and 12 Mini.

6. Maintenance

6.1 General Care

• Keep the device and its extension boards clean and free from dust and debris.
• Store the device and boards in a dry, cool place away from direct sunlight and extreme temperatures.
• Avoid dropping or subjecting the device to strong impacts.
• Use only the provided AC adapter or a compatible iOS data cable for charging.

6.2 Software Updates

To ensure compatibility with new mobile phone models and access the latest features, regularly check for software updates for the iCopy Plus2.2 and its associated PC software.

1. Visit the official QianLi Innovation website (www.qianlispace.com) to download the latest QianLi Repair (PC Software).
2. Follow the instructions provided on the website or within the software to update your device's firmware and PC software.

Image: Screenshot showing the QianLi Innovation Official Website and the download link for QianLi Repair (PC Software).

7. Troubleshooting

7.1 Device Not Powering On

• Ensure the device is fully charged. Connect it to the AC adapter or a compatible iOS data cable.
• Verify that the power button is pressed and held for at least 3 seconds.
• If the device still does not power on, contact customer support.

7.2 Function Not Working Correctly

• Ensure the correct extension board is securely attached for the desired function.
• Verify that all cables (e.g., battery cables, Face ID flex cables, jump wires for baseband) are correctly connected and compatible with the iPhone model.
• Check for and install any available software updates for the iCopy Plus2.2 and the QianLi Repair PC software.
• If using PC software, ensure proper drivers are installed and the connection is stable.
• For True Tone recovery without original LCD, confirm that the original Front Camera and Ear Speaker are present (for models after iPhone 8) as required.

7.3 Charging Issues

• Ensure the charging cable and AC adapter are functioning correctly. Try a different cable or adapter if available.
• Verify that the charging port on the iCopy Plus2.2 is clean and free of debris.

8. Specifications

9. User Tips

• The iCopy Plus2.2 is a combination tool kit, offering multiple repair functionalities in one device.
• Always ensure you have the correct matching flex cables and extension boards for the specific iPhone model and repair task to avoid compatibility issues.
• For complex operations like Baseband Logic EEPROM data read/write, refer to the official QianLi website for detailed "Welding Spots Charts" to ensure accurate jump wire connections.
• Keep the device's software updated to support the latest iPhone models and repair methods.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official QianLi Innovation website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for any warranty claims.