1. Introduction
This manual provides essential information for the setup, operation, and maintenance of your new Replacement Remote Control, model Mecool V8S. This remote is designed to be compatible with various Android TV Boxes, including T95, HK1, MX10, X88, X96, TX6, TX3, MX1, H50, H96, and S912 models. Please read this manual thoroughly before use.
Figure 1: Front and back view of the Mecool V8S Remote Control.
2. Setup
2.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert two AAA batteries (not included), ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
Figure 2: Battery compartment open for installation.
Figure 3: Detailed view of the battery compartment.
2.2 Initial Use
This remote control does not require any programming or pairing for initial use with compatible Android TV Boxes. Once batteries are installed, it should function immediately.
3. Operating Instructions
Point the remote control directly at your Android TV Box. Ensure there are no obstructions between the remote and the device.
3.1 Basic Functions
- Power Button (⏻): Turns the TV Box on or off.
- Navigation Buttons (Up, Down, Left, Right, OK): Used to navigate menus and select options. The blue 'OK' button confirms selections.
- Volume Control (VOL+, VOL-): Adjusts the volume.
- Mute Button (MUTE): Mutes or unmutes audio.
- Channel/Page Navigation (⏮, ⏭): Used for media playback control (previous/next track) or page navigation.
- Home Button (⌂): Returns to the main home screen of the TV Box.
- Back Button (↶): Goes back to the previous screen or menu.
- Numeric Keypad (0-9): For direct input of numbers or text.
- DEL Button: Deletes characters during text input.
Figure 4: Layout of the remote control buttons.
Figure 5: Remote control in use.
3.2 TV Control Buttons (Programmable)
The buttons labeled 'SET', 'TV IN', 'VOL-', 'VOL+' under 'TV CONTROL' are typically programmable to control basic functions of your television (e.g., TV power, input, volume). Refer to your TV Box or TV manual for specific programming instructions if this feature is supported.
Figure 6: TV Control section of the remote.
3.3 Visual Demonstration
Video 1: Demonstration of the remote control's physical appearance and button presses.
4. Maintenance
4.1 Battery Replacement
Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA). Do not mix old and new batteries or different types of batteries.
4.2 Cleaning
To clean the remote control, gently wipe it with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or immerse the remote in water.
4.3 Storage
Store the remote control in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If the remote will not be used for an extended period, it is recommended to remove the batteries to prevent leakage.
5. Troubleshooting
- Remote not responding:
• Check if the batteries are inserted correctly with the right polarity.
• Replace old batteries with new ones.
• Ensure there is a clear line of sight between the remote control and the TV Box's infrared receiver.
• Make sure the remote is pointed directly at the TV Box. - Remote functions are incorrect:
• Verify that your TV Box model is listed as compatible (T95, HK1, MX10, X88, X96, TX6, TX3, MX1, H50, H96, S912). This remote is not a universal remote and is specifically designed for these TV Box models. - Voice control not working:
• This remote control does not support voice control functionality. - No programming required:
• Remember that this remote control does not require programming or pairing for its primary functions with compatible TV Boxes.
6. Specifications
| Feature | Specification |
|---|---|
| Item Type | Remote Control |
| Model Number | Mecool V8S |
| Material | ABS |
| Size (L x W x H) | 156 x 47 x 20 mm (6.1 x 1.8 x 0.7 inches) |
| Color | Black |
| Channel | 1 |
| Frequency | 433 MHz |
| Wireless Communication | RF |
| Use | TV (for Android TV Boxes) |
| Package | Yes (1 Pc) |
| Origin | Mainland China |
| Certification | None |
| High-concerned chemical | None |
Figure 7: Remote control dimensions.
7. User Tips
- Compatibility Check: Always confirm your TV Box model is among the supported devices (T95, HK1, MX10, X88, X96, TX6, TX3, MX1, H50, H96, S912) to ensure full functionality.
- Direct Line of Sight: For optimal performance, maintain a direct line of sight between the remote's infrared emitter and your TV Box's receiver. The infrared emitter is located at the front tip of the remote.
- No Programming Needed: Unlike some universal remotes, this replacement remote is designed to work out-of-the-box with compatible TV Boxes without any complex setup procedures.
- Battery Quality: Using good quality batteries can extend the remote's operational life and ensure consistent performance.
Figure 8: Infrared emitter.
8. Warranty & Support
For any issues or questions regarding your remote control, please contact the seller or retailer from whom you purchased the product. Specific warranty details may vary by seller. Keep your purchase receipt as proof of purchase.
