Introduction
This manual provides comprehensive instructions for setting up and operating your 4K DP HDMI USB 3.0 KVM Switch. This versatile device allows two computers to share two monitors (one DisplayPort, one HDMI) and up to four USB 3.0 peripherals, supporting high-resolution video output up to 4K@60Hz. Please read this manual carefully to ensure proper installation and optimal performance.
Package Contents
- 1x 4K DP HDMI USB 3.0 KVM Switch (Model: KVM202DH3)
- 1x HDMI 2.0 cable (1.5m)
- 2x USB 3.0 cables (1.5m)
- 1x DP 1.2 cable (1.5m)
- 1x Wired Remote Control (1.5m)
Note: Additional HDMI and DisplayPort cables may be required depending on your setup. Ensure all cables used are compliant with HDMI 2.0 and DisplayPort 1.2 (or higher) standards for optimal performance, especially for 4K@60Hz resolution.

Image: KVM Switch dimensions and included accessories.
Setup Instructions
Follow these steps to connect your KVM switch:
- Connect Monitors to KVM:
- Connect your HDMI monitor to the 'Monitor HDMI OUT' port on the KVM switch.
- Connect your DisplayPort monitor to the 'Monitor DisplayPort OUT' port on the KVM switch.
- Connect Computers to KVM:
- For PC1: Connect its HDMI output to 'PC 1 HDMI IN' and its DisplayPort output to 'PC 1 DisplayPort IN' on the KVM switch.
- For PC2: Connect its HDMI output to 'PC 2 HDMI IN' and its DisplayPort output to 'PC 2 DisplayPort IN' on the KVM switch.
- Important: Each computer requires both an HDMI and a DisplayPort connection to the KVM for dual monitor output.
- Connect USB to KVM:
- Connect one end of a USB 3.0 cable (included) to a USB 3.0 port on PC1, and the other end to 'USB 1' port on the KVM switch.
- Connect one end of another USB 3.0 cable (included) to a USB 3.0 port on PC2, and the other end to 'USB 2' port on the KVM switch.
- These USB connections are crucial for KVM functionality and also provide power to the switch.
- Connect Peripherals: Plug your keyboard, mouse, and any other USB 3.0 peripherals (e.g., printer, U disk) into the 'USB' ports on the front panel of the KVM switch.
- Connect Wired Remote (Optional): Plug the wired remote control into the dedicated port on the KVM switch for convenient switching.

Image: Comprehensive wiring diagram for the KVM switch, illustrating connections for two computers, two monitors, and USB devices.
Video: Demonstration of KVM switch setup and operation, showing two laptops sharing two monitors and peripherals.
Operating Instructions
The KVM switch offers multiple ways to switch between connected computers:
- Physical Button Switching: Press the 'Select' button located on the front panel of the KVM switch to toggle between PC1 and PC2. An LED indicator will show which PC is currently active.
- Wired Remote Control: Use the included wired remote control to switch between PC1 and PC2. Simply press the button on the remote.

Image: Physical button and wired remote control for computer selection.
Display Modes (Windows)
This KVM switch supports both 'Copy Mode' and 'Extend Mode' for your dual monitor setup. To configure these modes in Windows:
- Press the 'Windows' key + 'P' on your keyboard.
- A small window will pop up with display options:
- Copy Mode (Duplicate): Select 'Duplicate' to have both monitors display the same image from the selected PC.
- Extend Mode: Select 'Extend' to expand your desktop across both monitors, allowing you to drag windows between them.
Note: Your computer's graphics card and operating system must support dual display or multi-display functionality for these modes to work correctly.

Image: Visual representation of 'Copy Mode' and 'Extend Mode' display configurations.
USB Peripheral Sharing
All USB 3.0 peripherals connected to the KVM switch's front ports will automatically switch along with the selected computer, providing seamless access to your keyboard, mouse, and other devices.

Image: USB 3.0 ports for connecting various peripherals.
Specifications
| Attribute | Specification |
|---|---|
| Model Number | KVM202DH3 |
| Type | Cable Adapter, KVM Switch |
| Brand Name | AIMOS |
| Origin | Mainland China |
| Certification | None |
| Color | Black |
| Material | Metal |
| Switch Type | KVM Switch |
| Actuator Type | Push Button |
| Connector Type | HDMI, USB |
| Cable Length (Included) | 1.5m (for HDMI, DP, USB cables) |
| Resolution Support | 4K (3840x2160@60Hz), 4K (2048x1536@60Hz), 2560x1440@144Hz/120Hz/60Hz, 1920x1440@144Hz/120Hz/60Hz, 1920x1200@144Hz/120Hz/60Hz |
| USB Ports | 4x USB 3.0 |

Image: High-definition resolution support via DP and HDMI ports.
Maintenance
To ensure the longevity and optimal performance of your KVM switch, please observe the following maintenance guidelines:
- Environment: Keep the KVM switch in a dry, dust-free environment. Avoid exposing the device to extreme temperatures, high humidity, or direct sunlight.
- Cleaning: Clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the finish or internal components.
- Connections: Periodically check all cable connections to ensure they are secure. Loose connections can lead to signal loss or intermittent functionality.
- Power: Ensure the KVM switch receives adequate power through the connected USB 3.0 cables from your computers.
Troubleshooting
If you encounter issues with your KVM switch, please refer to the following common troubleshooting steps:
- No Display on Monitors:
- Verify that all HDMI and DisplayPort cables are securely connected between your computers, the KVM switch, and your monitors.
- Ensure both USB 3.0 cables are connected from your PCs to the KVM switch, as these provide necessary power.
- Confirm that your computers are powered on and actively outputting video.
- Try switching between PCs using both the physical button and the wired remote to ensure the switch is responding.
- Keyboard/Mouse Not Responding:
- Check that the USB 3.0 cables from your PCs to the KVM are firmly connected.
- Test your keyboard and mouse by connecting them directly to a computer to confirm they are functional.
- Reconnect the peripherals to the KVM's front USB 3.0 ports.
- Resolution or Refresh Rate Issues:
- Confirm that your monitors and graphics cards support the desired resolution and refresh rate.
- Ensure you are using HDMI 2.0 and DisplayPort 1.2 (or higher) compliant cables for 4K@60Hz output.
- Check your computer's display settings (e.g., 'Windows + P' on Windows) to ensure 'Extend' or 'Duplicate' mode is correctly selected and configured.
- Intermittent Connection:
- Ensure all cables are of good quality and properly seated.
- Avoid using excessively long cables, which can degrade signal quality.
User Tips
- Laptop Connectivity: If your laptop lacks direct HDMI or DisplayPort outputs, a USB-C docking station with DP and HDMI outputs can be used to connect to the KVM switch. Ensure the docking station supports the required video outputs and resolutions.
- Switching Delay: When switching between computers, it is normal for the monitors to briefly go black as they detect the new video signal. This typically lasts a few seconds.
- Cable Quality: Investing in high-quality HDMI 2.0 and DisplayPort 1.2 (or newer) cables is recommended to ensure stable and high-resolution video transmission, especially for 4K@60Hz.
Warranty and Support
This product comes with a one-year professional warranty. If you have any questions, require technical assistance, or experience issues with your KVM switch, please contact the seller or manufacturer's support team for prompt assistance.