Introduction
This manual provides detailed instructions for the Skydance Slim RF wireless Wall Touch Panel Series LED controllers, including models TW1, TW2, TW4, and TW5. These controllers are designed for dimming, color, and color temperature control of various LED strip types, offering a high-sensitive touch interface and wireless RF communication with compatible LED receivers. The ultra-thin design and battery power allow for flexible, wiring-free installation.
Overview of the Skydance Slim RF wireless Wall Touch Panel Series.
Safety Information
- Read all instructions carefully before beginning installation.
- When installing the battery, ensure correct positive and negative polarity.
- If the remote control will not be used for a long period, remove the battery.
- If the remote distance decreases or the control becomes insensitive, replace the CR2032 battery.
- If the controller does not respond to the LED receiver, re-match the remote.
- Handle the remote gently to prevent damage from falling.
- This product is intended for indoor and dry location use only.
Detailed safety information and key functions for each controller model.
Product Features
- Wireless Control: Utilizes 2.4G RFMode for reliable wireless communication.
- High Sensitivity: Features high-sensitive touch keys with blue/red LED indicators for intuitive control.
- Battery Powered: Operates on a CR2032 button battery, enabling an ultra-thin and portable design.
- Easy Installation: Designed for no-wiring, free installation, and easy removal.
- Versatile Compatibility: Supports Single Color, CCT (Color Correlated Temperature), RGB, RGBW, and RGB+CCT LED light types.
- Scene Memory: Allows editing and saving of up to 4 lighting effects for different scenes.
- Aesthetic Design: Available in both black and white color options.
Illustration of the high-sensitive touch keys and LED indicators.
The ultra-thin design powered by a CR2032 button battery.
Models and Key Functions
The Skydance Wall Mounted Touch Panel Series includes several models, each tailored for specific LED strip types and offering distinct control functionalities.
Visual representation of the different controller models and their interfaces.
Compatibility of each controller model with different LED light types.
TW1 Single Color Panel (Dimming Remote)
- Power Button: Turn on/off the light.
- 100% Brightness: Short press to set 100% brightness.
- Brightness Wheel: Touch to change brightness.
- Scene Buttons (I, II, III, IV): Short press to recall a saved scene. Long press for 5 seconds to save the current state into the selected scene (I, II, III, or IV).
TW1 Single Color Panel (White).
TW2 Dual Color Panel (CCT Remote)
- Power Button: Turn on/off the light.
- 100% Brightness: Short press to set 100% brightness.
- Brightness +/-: Adjust brightness in 10 levels.
- Color Temperature Wheel: Touch to change color temperature.
- Scene Buttons (I, II, III, IV): Short press to recall a saved scene. Long press for 5 seconds to save the current state into the selected scene (I, II, III, or IV).
TW2 Dual Color Panel (White).
TW4 RGB/RGBW Panel
- Power Button: Turn on/off the light.
- White/RGB Mix: For RGB light, short press to get white/RGB mix. Long press for 1-6 seconds to adjust saturation.
- W Channel Control: For RGBW light, short press to turn on W channel. Long press for 1-6 seconds to adjust W brightness.
- Brightness +/-: Adjust brightness in 10 levels.
- RGB Color Wheel: Touch to change static RGB color.
- Mode Button: Short press to run the next dynamic mode. Long press for 2 seconds to run mode/cycle.
- Speed Button: For dynamic mode, short press to adjust speed in 10 levels. Long press for 2 seconds to reset to default speed. For static color, short press to adjust saturation in 10 levels. Long press for 1-6 seconds for continuous adjustment.
- Scene Buttons (I, II): Short press to recall a saved scene. Long press for 5 seconds to save the current state into the selected scene (I or II).
TW4 RGB/RGBW Panel (White).
TW5 RGB+CCT Panel
- Power Button: Turn on/off the light.
- Brightness +/-: Adjust brightness in 10 levels.
- RGB Color Control: Adjust RGB color. Features a 7-color cycle (red, yellow, green, cyan, blue, purple, white). The multi-color touch wheel functions as an RGB color wheel.
- CCT Control: Adjust color temperature. Features a 3-color cycle (warm white, natural white, cold white). The multi-color touch wheel functions as a color temperature wheel.
- Mode Button: Short press to run the next dynamic mode. Long press for 2 seconds to run mode/cycle.
- Speed Button: For dynamic mode, short press to adjust speed in 10 levels. Long press for 2 seconds to reset to default speed. For static color, short press to adjust saturation in 10 levels. Long press for 1-6 seconds for continuous adjustment.
- Scene Buttons (I, II): Short press to recall a saved scene. Long press for 5 seconds to save the current state into the selected scene (I or II).
TW5 RGB+CCT Panel (White).
Installation
The Skydance touch panels are designed for easy, wiring-free installation and removal. They are powered by a CR2032 button battery.
Battery Installation
If the LED indicator does not light up when a key is pressed, it may be due to a dead battery or poor contact. Carefully replace the CR2032 battery, ensuring correct positive and negative polarity, or gently raise the battery shrapnel with a screwdriver to improve contact.
Panel Mounting Options
There are two primary methods for mounting the touch panel to a wall:
- Screw Mounting: Secure the baseplate to the wall using two screws.
- Adhesive Mounting: Adhere the baseplate to the wall using appropriate adhesive material (not included).
Once the baseplate is secured, the touch panel can be easily attached and removed from it.
Installation diagram showing the steps: Uninstall, Touch panel, Baseplate, Base.
Matching with RF LED Receivers
To control your LED lights, the touch panel must be matched with a compatible RF LED receiver. There are two methods for matching and deleting pairings.
Method 1: Using the Match Key on the Receiver
- To Match: Short press the match key on the RF LED receiver. Immediately after, short press the on/off key on the touch panel. The LED indicator on the receiver will flash rapidly a few times, indicating a successful match.
- To Delete All Matches: Press and hold the match key on the RF LED receiver for 5 seconds. The LED indicator will flash rapidly a few times, confirming that all matched remotes have been deleted.
Method 2: Using Power Restart
- To Match: Switch off the power to the LED receiver, then switch it back on. Immediately short press the on/off key on the touch panel 3 times. The connected LED light will blink 3 times, indicating a successful match.
- To Delete All Matches: Switch off the power to the LED receiver, then switch it back on. Immediately short press the on/off key on the touch panel 5 times. The connected LED light will blink 3 times, confirming that all matched remotes have been deleted.
The touch panel communicates wirelessly with RF LED receivers.
Operation
Refer to the "Models and Key Functions" section for specific operational details of each controller model (TW1, TW2, TW4, TW5). Each model offers intuitive touch controls for power, brightness, color, color temperature, dynamic modes, and scene management.
The ability to save and recall up to 4 custom lighting scenes.
Technical Specifications
| Category | Parameter | Value |
|---|---|---|
| Input and Output | Output Signal | RF (2.4GHz) |
| Working Voltage | 3VDC (CR2032) | |
| Working Current | <8mA | |
| Standby Time | >1 year | |
| Remote Distance | 30m (Barrier-free space) | |
| Safety and EMC | Certification | CCC, CE, LVD, ROHS |
| Warranty | 5 years | |
| Environment | Operating Temperature | -30°C to +55°C |
| IP Rating | IP20 | |
| Package | Size (L x W x H) | 100 x 92 x 16.5mm |
| Gross Weight | 0.137kg | |
| Material | Glass | |
| Applicability | Applicable Lights | LED strip |
Detailed technical specifications for the controller series.
Troubleshooting
- Remote not responding or reduced range: The CR2032 battery may be low or dead. Replace the battery, ensuring correct polarity.
- LED indicator not lighting up: Check the battery. If it's new, ensure it's inserted correctly and making good contact. Gently raise the battery shrapnel with a screwdriver if needed.
- Controller not controlling lights: The touch panel may have lost its pairing with the RF LED receiver. Follow the "Matching with RF LED Receivers" instructions to re-match the devices.
- Inconsistent control: Ensure the controller is used in an indoor, dry environment and within the specified 30m barrier-free remote distance. Obstacles can reduce range.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the touch panel. Avoid using abrasive cleaners or harsh chemicals, which can damage the surface.
- Battery Care: If the controller will not be used for an extended period, remove the CR2032 battery to prevent leakage and potential damage.
- Environmental Conditions: Ensure the controller is always used in a dry, indoor environment. Avoid exposure to moisture, extreme temperatures, or direct sunlight.
User Tips
- Model Selection: When purchasing, ensure the selected controller model (TW1, TW2, TW4, TW5) is compatible with your specific LED strip type (single color, CCT, RGB, RGBW, or RGB+CCT).
- Scene Customization: Take advantage of the scene memory function to quickly switch between your preferred lighting settings for different moods or activities.
- Battery Replacement: Keep a spare CR2032 battery on hand for quick replacement if the remote's performance degrades.
Warranty and Support
This product comes with a 5-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for contact details.