1. Product Overview
This manual provides instructions for the LAJQTAO SS22F25-G7 and SS-12F15 series of DPDT (Double Pole Double Throw) slide toggle switches. These switches are designed for various electronic applications, offering reliable two-position control.
2. Safety Warnings
- WARNING: Risk of electric shock. Do not open, disassemble, or repair the switch.
- WARNING: Keep away from heat, fire, and water.
- WARNING: Not suitable for children under 3 years. Choking hazard.
- CAUTION: For indoor use only.
- CAUTION: Disconnect power before cleaning or when not in use.
- EU LVD Voltage: This product is designed for low voltage applications, below 50Vac or 75Vdc.
3. Setup and Installation
These slide switches are designed for integration into electronic circuits. Ensure proper wiring and insulation for safe operation.
- Identify the appropriate mounting location for the switch. The switches feature fixed hole handles for secure installation.
- Refer to the technical specifications and pin configuration diagram (Figure 2) to correctly wire the switch into your circuit. The DPDT (Double Pole Double Throw) configuration allows for switching two separate circuits simultaneously between two positions.
- Ensure the power supply to the circuit is disconnected before performing any wiring.
- Mount the switch securely using appropriate fasteners through the fixed holes.
- After installation, verify all connections are secure and properly insulated before applying power.
4. Operating Instructions
The slide switch provides simple two-position control for your electronic circuit.
- Once installed and power is applied to the circuit, gently slide the handle of the switch to move it between its two distinct positions.
- Each position corresponds to a different circuit state (e.g., ON/OFF, or switching between two different functions).
5. Maintenance
- Always disconnect power to the circuit before cleaning the switch.
- Use a soft, dry cloth to gently wipe the surface of the switch.
- Do not use water, alcohol, or any chemical cleaners, as these can damage the switch's internal components or finish.
- Store unused switches in a dry and cool environment to prevent degradation.
6. Troubleshooting
If the switch is not functioning as expected, consider the following:
- No Functionality: Check all wiring connections for proper contact and ensure there are no loose wires. Verify that the circuit is receiving power.
- Intermittent Operation: Inspect for any debris or foreign objects obstructing the slide mechanism. Ensure the switch is securely mounted and not experiencing excessive vibration.
- Physical Damage: If the switch handle or body is visibly damaged, it may need replacement.
For persistent issues, contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | LAJQTAO |
| Models | SS22F25-G7, SS-12F15 (Also JQ-001, JQ-002, JQ-003, JQ-004 for generic connectors) |
| Switch Type | DPDT (Double Pole Double Throw) Slide Toggle Switch |
| Positions | 2 Positions |
| Pins | 6 Pins |
| Nominal Voltage | DC 12V (Can be used in applications up to DC 75V or AC 50V) |
| Materials | Plastic, Copper, Stainless Steel |
| Wireless Functionality | No |
| Battery Included | No |
| Origin | Mainland China |
| Manufacturer | Zhongshan Qingtao Electronic Products Co., Ltd |
For detailed dimensions, refer to Figure 2.
8. User Tips
- Verify Dimensions: Before purchasing or installing, carefully check the dimensions provided in the technical diagram (Figure 2) to ensure the switch fits your intended application. Some users have noted the switches can be smaller than expected.
- Check Electrical Ratings: While the product is rated for DC 12V, always confirm the maximum voltage and current ratings for your specific application to prevent damage or malfunction. The provided specifications indicate suitability for low voltage applications (below 50Vac or 75Vdc).
- Secure Mounting: Utilize the fixed hole handles for a stable and reliable installation, especially in applications subject to movement or vibration.
9. Warranty and Support
For product inquiries or technical support, please contact the manufacturer:
- Manufacturer: Zhongshan Qingtao Electronic Products Co., Ltd
- Email: 371482226@qq.com
- Address: Room 502, Building B1, Fuliyuan, No. 3 Peninsula Road, Shaxi Town, Zhongshan City, Guangdong Province, China
For customers in the EU, you may also contact the authorized representative:
- EU Authorized Representative: LEDMAN TEKNOLOJI LIMITED ŞİRKETİ
- Email: turservices@authrepglobal.com
- Address: Yenibosna Merkez, 1.Asena Sk.No:15,34295 Bahcelievler/Istanbul
Please note that specific warranty terms and conditions may vary. Refer to your purchase documentation for details. A user manual in PDF format is also available for download: User Manual (PDF).