1. Introduction
The UGREEN Magnetic Phone Stand (Model 15709) is a versatile and robust desktop accessory designed to securely hold your smartphone or tablet. Featuring powerful magnets, a dual-axis design, and multi-angle adjustment, it provides a stable and ergonomic viewing experience for various activities, from work to leisure. Crafted from high-quality aluminum alloy, this stand offers durability and a sleek aesthetic.

2. Key Features
- Powerful Magnetic Force: Built-in strong magnets securely hold your device, preventing accidental falls.
- Dual-Axis Design & Multi-Angle Adjustment: Offers 360° rotation and 180° tilt, allowing for customized viewing angles.
- Height Adjustable: Supports a maximum height adjustment of 187mm for optimal ergonomic positioning.
- High-Quality Aluminum Alloy: Constructed from sturdy and thickened aluminum alloy for enhanced stability and durability.
- Foldable & Portable: Compact design allows for easy folding and portability, making it convenient for travel or storage.
- Landscape and Portrait Mode Support: Seamlessly switch between horizontal and vertical viewing orientations.
- All-round Anti-skid Protection: Features silicone material on the magnetic surface and anti-slip pads on the bottom for enhanced grip and device protection.
- Charging Compatibility: Designed to allow easy cable connection for charging while your device is on the stand.
- Wide Compatibility: Works with MagSafe-compatible iPhones (12/13/14/15 series) and other Android phones (4.7-7.2 inches) using the included metal ring.


3. Package Contents
The UGREEN Magnetic Phone Stand package includes:
- 1 x UGREEN Magnetic Phone Stand (Model 15709)
- 1 x Metal Ring (for non-MagSafe compatible devices)

4. Setup Instructions
4.1 For MagSafe Compatible Devices (iPhone 12/13/14/15 Series or MagSafe Cases)
- Place the UGREEN Magnetic Phone Stand on a stable, flat surface.
- Align your MagSafe-compatible iPhone or case with the magnetic surface of the stand. The magnets will automatically snap into place, securing your device.
4.2 For Other Phones (Android or non-MagSafe iPhones)
For phones without built-in MagSafe compatibility or non-MagSafe cases, use the included metal ring:
- Clean the back surface of your phone or phone case thoroughly to ensure good adhesion.
- Peel off the protective film from the adhesive side of the metal ring.
- Carefully center and attach the metal ring to the back of your phone or case. Press firmly for a few seconds to ensure strong adhesion.
- Once the metal ring is attached, place your phone onto the magnetic surface of the stand.

Video: Demonstrates the UGREEN MagSafe Phone Stand's features, including phone attachment, metal ring application, and angle adjustments.
5. Operating Instructions
5.1 Adjusting Viewing Angle and Height
- Tilt Adjustment: The stand features a 180° tilt mechanism. Gently push or pull the phone holder to achieve your desired vertical angle.
- Rotation: The magnetic head allows for 360° rotation. Rotate your phone to switch between landscape and portrait modes effortlessly.
- Height Adjustment: The dual-axis design enables height adjustment up to 187mm. Adjust the arms of the stand to raise or lower your device to an ergonomic viewing height.

5.2 Charging Your Device
The stand is designed with an open space to allow easy access to your device's charging port. Simply connect your charging cable while your phone is mounted on the stand.

6. Maintenance
- Cleaning: Wipe the stand with a soft, dry cloth to remove dust and fingerprints. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish of the aluminum alloy and silicone pads.
- Storage: When not in use, fold the stand to its compact form and store it in a clean, dry place to protect it from dust and potential damage.
7. Troubleshooting
- Phone not sticking firmly:
- Ensure your phone or case is MagSafe compatible.
- If using a non-MagSafe device, verify that the metal ring is properly attached to the back of your phone or case and is centered.
- Check for any obstructions (e.g., thick cases, pop sockets) between the phone and the magnetic surface that might weaken the magnetic connection.
- Stand feels unstable:
- Ensure the stand is placed on a flat, stable, and non-slippery surface.
- Check the anti-slip pads on the bottom of the stand for wear or damage.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | UGREEN |
| Model Name | Magnetic Aluminum Desk Phone Holder |
| Model Number | 15709 |
| Material | Full Aluminum Alloy |
| Features | Magnetic, Desk Holder |
| Compatibility | For 4.7-7.2 inch devices (Universal) |
| Charger | No (Stand only) |
| Has Speaker | No |
| Base Width | 84.7 mm |
| Max Height | 152.4 mm |
| Base Thickness | 4 mm |
| Package | UGREEN Retail Box |

9. User Tips
- The UGREEN Magnetic Phone Stand allows you to easily view and access your phone, helping you stay updated with important messages while working.
- If you are using a non-MagSafe magnetic case, ensure the provided metal ring is securely stuck to the case to enhance magnetic power.
- The metal ring, when properly applied, does not interfere with wireless charging capabilities.
- Adjusting the stand's height and angle can significantly reduce arm fatigue and neck soreness during prolonged use.
10. Warranty and Support
This UGREEN Magnetic Phone Stand comes with a 1-year warranty from our store, covering manufacturing defects and malfunctions under normal use. For any support inquiries, please contact UGREEN customer service.
