Sunon PE903

Contents

Sunon PE903 Quartz Chronograph Watch Movement Instruction Manual

Model: PE903

1. Introduction

The Sunon PE903 is a high-quality quartz chronograph watch movement designed for precision timekeeping and stopwatch functions. This movement features three hands, three subdials (often referred to as '3 Eyes'), a date display, and chronograph capabilities for 1/10 second, chronograph seconds, and chronograph minutes. It is primarily intended for use as a replacement part or for custom watch builds, offering reliable performance for various watch models.

2. Specifications

FeatureSpecification
Model NumberPE903
TypeQuartz Chronograph Movement
Diameter (Size)Φ29.75mm
Height4.52mm
Accuracy±45 seconds per month
FunctionsTime (Hour, Minute, Second), Date, Chronograph (1/10 second, Chrono second, Chrono minute)
Recommended UseAccessories replacement, Watch Repair & Kits
OriginHongkong (China)

2.1 Technical Diagrams

The following diagrams provide detailed dimensions and layouts of the PE903 movement, crucial for proper fitting and hand alignment.

Technical diagram of Sunon PE903 movement showing overall dimensions and subdial positions.
Figure 1: Technical diagram of Sunon PE903 movement, detailing dimensions and subdial layout.
Technical diagram of Sunon PE903 movement showing additional dimensions and component placement.
Figure 2: Additional technical diagram of Sunon PE903 movement, illustrating further dimensions and component details.
Technical diagram of Sunon PE903 movement focusing on hand sizes and clearances.
Figure 3: Technical diagram of Sunon PE903 movement, specifically showing hand sizes and clearances.
Technical diagram of Sunon PE903 movement with detailed crown and stem dimensions.
Figure 4: Technical diagram of Sunon PE903 movement, including detailed crown and stem dimensions.

3. Components Overview

The PE903 movement consists of several key parts:

  • Main Movement Body: Houses the quartz crystal, integrated circuits, and gear train.
  • Date Wheel: Displays the current date, visible through a date window on the dial.
  • Stem (Winding Stem/Crown Stem): Used for setting the time and date, and for operating the chronograph pushers.
  • Chronograph Subdials: Typically include a 1/10 second counter, a chronograph second counter, and a chronograph minute counter.
Front view of the Sunon PE903 quartz chronograph movement with date wheel and stem. An inset shows a watch face with chronograph subdials.
Figure 5: Front view of the PE903 movement, showing the date wheel and stem.
Back view of the Sunon PE903 quartz chronograph movement with the stem inserted. An inset shows a watch face with chronograph subdials.
Figure 6: Back view of the PE903 movement.
Watch movement with hands and date wheel installed, illustrating the assembled state before casing.
Figure 7: PE903 movement with hands and date wheel, ready for casing.

4. Installation and Setup

Installation of a watch movement requires specialized tools and expertise. If you are not experienced in watchmaking, it is highly recommended to seek professional assistance.

  1. Preparation: Ensure your workspace is clean, dust-free, and well-lit. Use appropriate watchmaking tools, including tweezers, hand-setting tools, and a movement holder.
  2. Handling the Movement: Always handle the movement by its edges or using non-magnetic tweezers. Avoid touching the gears, coils, or other delicate components.
  3. Inserting the Stem: Carefully insert the winding stem into the movement. Ensure it clicks securely into place. Refer to the technical diagrams for proper stem dimensions and insertion points.
  4. Mounting the Movement: Place the movement into the watch case, ensuring it is correctly aligned and secured with any movement rings or screws provided by the watch case manufacturer.
  5. Attaching the Dial: Carefully place the watch dial onto the movement, aligning the dial feet with the corresponding holes on the movement.
  6. Setting the Hands: Using a hand-setting tool, carefully press the hour, minute, and second hands onto their respective pinions. Ensure they are parallel to the dial and do not touch each other or the dial. For chronograph hands, ensure they are aligned to zero.
  7. Testing: Before closing the case, perform basic tests to ensure the time, date, and chronograph functions operate correctly.
  8. Closing the Case: Once satisfied with the installation and functionality, carefully close and seal the watch case.
A finished watch with a black dial, brown leather strap, and chronograph functions, powered by a movement like the PE903.
Figure 8: Example of a watch utilizing a chronograph movement.

5. Operating Instructions

The PE903 movement operates with a standard crown and two pushers for chronograph functions.

5.1 Setting Time

  1. Pull the crown out to Position 2 (the outermost position).
  2. Rotate the crown to adjust the hour and minute hands to the desired time.
  3. Push the crown back in to Position 0 (normal operating position) to start the watch.

5.2 Setting Date

  1. Pull the crown out to Position 1 (the first click).
  2. Rotate the crown (usually clockwise or counter-clockwise, depending on the movement) to advance the date to the desired day.
  3. Push the crown back in to Position 0.
  4. Note: Avoid setting the date between 9 PM and 3 AM, as this can damage the date mechanism.

5.3 Using the Chronograph

The chronograph function is controlled by two pushers, typically located at 2 o'clock (Pusher A) and 4 o'clock (Pusher B) on the watch case.

  • Start/Stop: Press Pusher A to start the chronograph. Press Pusher A again to stop it.
  • Reset: While the chronograph is stopped, press Pusher B to reset all chronograph hands (1/10 second, chronograph second, and chronograph minute) back to their zero positions.

6. Maintenance

Proper maintenance ensures the longevity and accuracy of your PE903 movement.

  • Battery Replacement: The PE903 uses a standard watch battery (specific type not provided, typically a button cell). When the watch stops or the second hand starts skipping (End-of-Life indicator), the battery needs replacement. This should ideally be done by a qualified watch technician to ensure proper sealing and avoid damage.
  • Cleaning: Keep the watch clean and dry. Avoid exposing the movement to dust, moisture, or extreme temperatures. If the movement is exposed during repair, ensure it is cleaned with appropriate tools and solutions.
  • Professional Service: For any complex repairs, adjustments, or water resistance testing after installation, consult a professional watchmaker.

7. Troubleshooting

  • Watch Not Running:
    • Check if the crown is pushed fully into Position 0.
    • The battery may be depleted and needs replacement.
    • Ensure the movement is properly seated and not obstructed.
  • Incorrect Time/Date:
    • Refer to Section 5 for correct time and date setting procedures.
    • Ensure the crown is fully pushed in after setting.
  • Chronograph Hands Not Resetting to Zero:
    • Ensure the chronograph is stopped before pressing the reset pusher (Pusher B).
    • If hands are misaligned, a professional watchmaker can perform a chronograph hand reset/calibration.
  • Inaccurate Timekeeping:
    • While quartz movements are highly accurate, significant deviation (beyond ±45 seconds per month) may indicate a fault or a weak battery. Consult a professional.

8. User Tips

  • Careful Handling: Several users have noted the importance of careful handling during installation. The movement is delicate, and improper handling can lead to damage.
  • Protective Packaging: When receiving a replacement movement, it's beneficial if it comes in a protective box. Some users suggest requesting the adjustment needle (stem) to be removed and packaged separately to prevent damage during transit.
  • Professional Installation: If you are not experienced in watch repair, consider having a professional install the movement to ensure proper function and avoid accidental damage.
Two Sunon PE903 movements packaged in clear plastic protective cases.
Figure 9: Movements often come in protective cases for safe transport.

9. Warranty and Support

For warranty information or technical support regarding your Sunon PE903 movement, please contact the seller or the manufacturer directly. Keep your purchase records, including the date of purchase and seller information, as they may be required for warranty claims or support inquiries.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.