Firecore F95T-4G

Contents

FIRECORE F95T-4G 16 Lines 4D Green Laser Level User Manual

Model: F95T-4G

1. Safety Information

Please read and understand all safety information before operating this product. Failure to follow these instructions may result in laser exposure, electric shock, fire, and/or serious injury.

1.1 Laser Safety

This product is a Class 2 laser product in accordance with IEC/EN 60825-1:2014. Laser radiation is emitted from the aperture. Do not stare into the laser beam or direct the laser beam at other people or reflective surfaces. Laser output is <1mW.

  • Do not disassemble the laser level. There are no user-serviceable parts inside.
  • Do not modify the laser level in any way.
  • Do not operate the laser level in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Always store the laser level in its protective case when not in use.

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your retailer.

  • FIRECORE F95T-4G Laser Level
  • 6600mAh Li-ion Battery
  • Type-C Charger
  • Remote Control
  • Lifting Platform
  • Laser Board
  • Protective Suitcase
  • Multilingual User Manual (PDF reference: User manual (PDF))
Image showing the contents of the FIRECORE F95T-4G package, including the laser level, battery, charger, remote, lifting platform, laser board, suitcase, and manual.
Figure 2.1: Package Contents

3. Product Overview

The FIRECORE F95T-4G is a 16-line 4D green laser level designed for precise leveling tasks. It features an advanced LCD display and multiple operating modes.

Diagram of the FIRECORE F95T-4G laser level with labeled components.
Figure 3.1: Laser Level Components

3.1 Components

  • Laser Windows: (With Protective Cover)
  • Bottom Window: (Welded to the Bracket)
  • H&V Lines/Pulse Button: Controls horizontal/vertical lines and pulse mode.
  • Brightness/Manual Button: Adjusts laser brightness and activates manual mode.
  • Rechargeable Lithium Battery: Provides power to the unit.
  • Sliding Switch: Main power and pendulum lock switch.
  • 360° Adjustment Screw: For fine rotational adjustments.
  • Non-removable Bracket: Integrated mounting bracket.
  • LCD Display Screen: Shows operational status and settings.
  • Hanging Hole: For wall mounting.
  • Strong Magnetism: For attaching to metal surfaces.
  • Non-slip mat: Provides stability.
  • Mounting Threads: 1/4'' and 5/8'' for tripod and accessory compatibility.

3.2 LCD Display

The advanced LCD display provides clear visual feedback on the device's status.

Close-up of the LCD screen showing various indicators.
Figure 3.2: LCD Display Indicators
  • Battery Status: Indicates remaining battery charge (3-gear power display).
  • Pendulum Lock: Shows if the pendulum is locked or unlocked.
  • X-axis Tilt Angle: Displays the current tilt angle along the X-axis.
  • Y-axis Tilt Angle: Displays the current tilt angle along the Y-axis.
  • Pulse Mode: Indicates when pulse mode is active.
  • Manual Mode: Indicates when manual mode is active.
  • V/H Lines: Shows which vertical and horizontal lines are active.
  • Adjustable Brightness: Indicates brightness level.
  • Tilt Warning: '!!!' symbol appears when the device is out of self-leveling range.

4. Setup

4.1 Battery Installation and Charging

  1. Locate the battery compartment on the side of the laser level.
  2. Press the quick release button to open the battery cover.
  3. Insert the 3.7V 6600mAh Lithium Battery, ensuring correct polarity.
  4. Close the battery cover until it clicks into place.
  5. To charge, connect the Type-C charger to the charging port on the laser level. The power indicator will show charging status. Charging time is approximately 3-4 hours with a 5V/2A adapter.
Diagram showing battery installation and Type-C charging port.
Figure 4.1: Battery Installation and Charging

4.2 Mounting the Laser Level

The F95T-4G offers versatile mounting options:

  • Integrated Bracket: The laser level comes with a non-removable bracket for stability on flat surfaces.
  • Tripod Mounting: Use the 1/4'' or 5/8'' mounting threads on the bottom of the unit to attach it to a compatible tripod.
  • Lifting Platform: For precise height adjustments, place the laser level on the included lifting platform.
  • Magnetic Attachment: The strong magnets on the base allow for secure attachment to metal surfaces.
Image demonstrating various mounting methods including tripod and lifting base.
Figure 4.2: Multiple Ways of Placing

5. Operation

5.1 Power On/Off and Pendulum Lock

  1. To power on the device and unlock the pendulum for self-leveling, slide the main switch to the 'ON' position. The laser lines will activate.
  2. To power off the device and lock the pendulum, slide the main switch to the 'OFF' position. This protects the pendulum during transport.

5.2 Self-Leveling Mode

When the device is powered on and the pendulum is unlocked, it will automatically self-level. If the inclination angle of the instrument exceeds ±4°, the '!!!' prompt will appear on the display screen, and the laser line will flash quickly, indicating that the device is out of its self-leveling range. Adjust the position of the laser level until it is within range and the lines stabilize.

Image demonstrating self-leveling mode and manual mode.
Figure 5.1: Self-Leveling Mode

5.3 Manual Mode (Tilt Mode)

To operate the laser level at a specific angle (e.g., for stairs or sloped surfaces):

  1. Ensure the device is in the 'OFF' state (pendulum locked).
  2. Press and hold the 'Manual' button for approximately 3 seconds until the laser rays appear and a lock icon prompt appears on the display screen.
  3. Release the button. The laser lines will flash slowly without an alarm, indicating it is in manual mode. You can now set the device at your desired angle.
  4. To exit manual mode, long press the 'Manual' button again.

5.4 Pulse Mode (Receiver Mode)

Pulse mode is used when working with a laser receiver (e.g., FIRECORE FD30) to extend the working range or for outdoor use where laser lines may be difficult to see.

  1. Turn on the laser level.
  2. Press and hold the 'H&V Lines/Pulse' button for about 3 seconds. The laser lines will flash 3 times, and the device will enter pulse mode.
  3. Turn on your FD30 receiver and search for the laser lines.
  4. When the receiver detects the laser line, it will emit 'Beep' sounds. The sound can be turned off on the receiver if desired.
  5. If the receiver is not used for more than 5 minutes, it will automatically shut down.
Image showing the laser level in pulse mode with a receiver.
Figure 5.2: Pulse Mode Operation

5.5 Brightness Adjustment

The laser level features three brightness adjustment levels to optimize visibility in different lighting conditions. Press the 'Brightness/Manual' button briefly to cycle through the brightness settings.

Image illustrating the three brightness adjustment levels.
Figure 5.3: Brightness Adjustment

5.6 Remote Control

The included remote control allows for convenient operation of the laser level from a distance.

Image of the remote control with labeled buttons.
Figure 5.4: Remote Control Functions
  • V1/V2: Activates/deactivates vertical laser lines.
  • H1/H2: Activates/deactivates horizontal laser lines.
  • Pulse Mode: Toggles pulse mode on/off.
  • Brightness Adjustment: Adjusts laser brightness.

5.7 Laser Line Projection

The F95T-4G projects 16 green laser lines, forming 4x360° planes (one horizontal and three vertical) for comprehensive coverage in various applications, including laying floor tiles.

Diagram showing the 4x360 degree laser planes projected by the device.
Figure 5.5: 4x360° Laser Planes
Image showing the laser level being used for laying floor tiles.
Figure 5.6: Application for Laying Floor Tiles

6. Maintenance

To ensure the longevity and accuracy of your FIRECORE F95T-4G laser level, follow these maintenance guidelines:

  • Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Storage: Always lock the pendulum before storing the device. Store in a dry, cool place, preferably in its protective suitcase.
  • Battery Care: Fully charge the battery before long-term storage. Recharge periodically if stored for extended periods to maintain battery health.
  • Protection: The device is designed with IP54 waterproof/dustproof rating and shock resistance, featuring a window protective cover for enhanced protection.
Images highlighting dustproof, waterproof, and shock resistance features.
Figure 6.1: Durability Features

7. Troubleshooting

  • Laser lines flashing rapidly: The device is likely out of its self-leveling range (inclination exceeds ±4°). Adjust the position of the laser level until it is on a more level surface.
  • No laser lines: Check if the device is powered on and the pendulum is unlocked. Ensure the battery is charged.
  • Laser lines dim or not visible outdoors: Adjust the brightness setting. Activate pulse mode and use a compatible laser receiver (e.g., FD30) for better visibility and extended range.
  • Remote control not responding: Ensure the remote control battery is functional and there are no obstructions between the remote and the laser level.
  • Battery drains quickly: Ensure the battery is fully charged before use. Operating in extreme temperatures can affect battery life.

8. Specifications

AttributeF95T-4G
Laser Line16 Green Lines
Leveling TypeGravity Pendulum
IP RatingIP54
Laser ClassClass 2 (IEC/EN 60825-1:2014), <1mW power output
Overall Accuracy±3mm/10M (±1/9 inch/33Ft)
Self-leveling TimeWithin 3s
Self-leveling Range±4°
Working Distance30m/98ft
Use Receiver FD20(FD30)2-50m(FD20)/2-60m(FD30)
Laser Wavelength505nm-520nm
Battery CapacityRechargeable Li-ion Battery (3.7V 6600mAh)
Charging TimeAbout 3-4 hrs with 5V/2A Adapter
Operation Time (All Lines On)Min. 8 hrs
Mount Size1/4''-20 & 5/8''-11
Temperature range (operation)-10°C to 50°C
Temperature range (storage)-20°C to 60°C

9. User Tips

  • Initial Charge: It is recommended to fully charge the battery before the first use to ensure optimal performance and battery longevity.
  • Pendulum Lock for Transport: Always ensure the pendulum is locked when transporting the laser level to prevent damage to the internal mechanism.
  • Maximize Battery Life: For extended battery life, avoid completely discharging the lithium-ion battery frequently. Recharge it when the battery indicator shows low charge.
  • Outdoor Visibility: For outdoor projects or in brightly lit environments, activate the pulse mode and use a compatible laser receiver (like the FD30) to detect the laser lines effectively.

10. Warranty and Support

The FIRECORE F95T-4G laser level comes with a 1-year warranty. For warranty claims, technical support, or service inquiries, please refer to the official seller's contact information or the detailed user manual (PDF) for specific instructions.

For further details, please consult the comprehensive user manual available as a PDF: User manual (PDF).

© 2023 Firecore. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.