BAOFENG F22/T22

Contents

BAOFENG F22/T22 Two-Way Radio Owner's Manual

FM Two-Way Radio Transceiver

1. Introduction

Thank you for choosing the BAOFENG F22/T22 FM two-way radio transceiver. This device is designed for use in the 446 private mobile radio service (PMR446) and FRS 462MHz. It is programmed with 16 PMR446 frequencies or 22 FRS channels, offering a maximum transmission power of 500 mW (PMR446) or ≤2W (FRS), and a bandwidth of 12.5 kHz. It features a fixed antenna and does not require registration or fees, though restrictions of use may apply in some non-EU countries.

The BAOFENG F22/T22 combines the latest radio communication technology with a sturdy mechanical frame, making it an ideal solution for professionals needing to stay in touch with their team (e.g., construction sites, hotels) or for leisure users wanting to connect with friends and family.

Important Safety Information:

Before using this product, please read the RF Energy Exposure and Product Safety Guide that accompanies the radio. This guide contains instructions for safe usage, RF energy awareness, and control for compliance with applicable standards and regulations.

2. Package Contents

Your BAOFENG F22/T22 package should include the following items:

  • 2 x F22/T22 Transceivers
  • 2 x 1400mAh Li-ion Rechargeable Battery Packs
  • 2 x Belt Clips
  • 2 x Desktop Chargers
  • 2 x Hand Straps
  • 1 x User Manual

Note: 3 x AAA batteries are not included and are an optional power source.

3. Main Controls and Parts of the Radio

Familiarize yourself with the radio's components and controls:

Diagram of BAOFENG F22/T22 radio parts with labels and dimensions.
Figure 1: BAOFENG F22/T22 Radio Components
  1. Antenna: For transmitting and receiving signals.
  2. Backlit LCD Display: Shows channel, battery status, and other indicators.
  3. ▲ UP Button: Press to increase volume or navigate menu settings.
  4. MENU/Lock Button: Press to enter the radio's menu. Press and hold for 3 seconds to activate/deactivate keypad lock.
  5. CALL/Power Button: Press to send a call tone. Press and hold to turn the radio on/off.
  6. ▼ DOWN Button: Press to reduce volume or navigate menu settings.
  7. Speaker & Built-in Microphone: For audio output and input.
  8. LED Flashlight: For illumination.
  9. Belt Clip: For attaching the radio to your belt.
  10. MONI Button (Monitor): Press and hold to activate the Monitor function for weak signal monitoring.
  11. SPK | MIC (under protective cover): Port for external audio devices (e.g., microphones, headphones).
  12. SCAN Button: Press once to activate channel scan.
  13. Type-C USB Charging Port: For recharging the radio.
  14. PTT Button (Push-To-Talk): Press and hold to transmit.
  15. Emergency Button: When the radio is on, short press to turn the LED flashlight on/off. Press and hold to activate/deactivate emergency alerts.

4. Setup

4.1. Battery Installation and Charging

The BAOFENG F22/T22 can be powered by either a 1400mAh Li-ion rechargeable battery pack (included) or 3 x AAA Ni-MH batteries (optional, not included).

Installing the Battery Pack

  1. First, remove the belt clip as described below.
  2. Open the battery compartment by sliding the cover.
  3. Insert the Li-ion battery pack into the compartment, ensuring correct orientation.
  4. Close the battery compartment with the cover and reattach the belt clip.

Charging the Li-Ion Battery Pack ('LB-T22')

Place your transceiver in the desktop charger cradle or connect a wall adapter (not included) to the Type-C USB charging port on the radio. The charging status is indicated by the LED on the desktop charger and by the flashing battery icon on the radio display. Once charging is complete, the LED will turn off, and the battery icon on the screen will show full bars.

Charging Ni-MH Batteries (3 x AA, Optional)

If using 3 x AA Ni-MH rechargeable batteries, place the transceiver in the desktop charger cradle or connect a wall adapter to the Type-C USB charging port. A full charge takes approximately 5 hours. The battery icon on the radio display will flash, and the red LED on the desktop charger will be on during charging. When charging is complete, the LED will turn off, and the battery icon will show full bars. It is recommended to detach the wall adapter or remove the radio from the cradle after 5 hours.

Images showing how to install the battery, attach the belt clip, and charge the radio via USB-C.
Figure 2: Battery Installation and Charging

4.2. Installing and Removing Belt Clips

The belt clip allows you to easily attach the radio to your belt. However, it must be removed to install or replace the battery.

To Remove the Belt Clip:

  1. Locate the belt clip lock tab at the top of the clip.
  2. Push the tab upwards to release the clip from its slot on the radio's rear rail.
  3. Slide the belt clip off the radio.

To Install the Belt Clip:

  1. Align the belt clip with the guides on the radio's rear rail.
  2. Slide the clip downwards until it snaps securely into place.

5. Operating Instructions

5.1. Power On/Off and Volume Adjustment

To Turn On the Radio:

Press and hold the CALL/Power Button until the radio turns on and you hear a tone.

To Adjust Volume:

Use the ▲ UP Button to increase volume and the ▼ DOWN Button to decrease volume. If no signal is picked up, momentarily activate the Monitor function to detect weak signals, then adjust the volume.

To Turn Off the Radio:

Press and hold the CALL/Power Button until a switch-off tone is heard.

5.2. Channel Selection

The radio has 16 PMR446 channels or 22 FRS channels. To communicate, both radios must be set to the same channel and privacy code.

  1. Turn on the radio by pressing and holding the CALL/Power Button.
  2. Press the MENU/Lock Button until the channel number starts to flash.
  3. Use the ▲ UP Button or ▼ DOWN Button to change the channel. Long press these buttons to scroll rapidly.
  4. Press the PTT Button to exit the menu or the MENU/Lock Button to continue setup.

5.3. CTCSS/DCS Tones Selection (Privacy Codes)

The radio supports 155 Sub-Codes (50 CTCSS codes / 105 DCS codes) to filter unwanted transmissions. To activate a CTCSS/DCS tone:

  1. Ensure the desired channel is selected.
  2. Press the MENU/Lock Button twice until the display shows "CTC" or "DCS" (flashing on the lower left).
  3. Use the ▲ UP Button or ▼ DOWN Button to select "ct" (CTCSS) or "dc" (DCS).
  4. Press the MENU/Lock Button to enter the CTCSS or DCS tone selection.
  5. Use the ▲ UP Button or ▼ DOWN Button to select the desired tone.
  6. Press the PTT Button to exit the menu or the MENU/Lock Button to continue setup.

5.4. Talking on Your Radio (PTT)

  1. Ensure no one else is currently speaking on the selected channel.
  2. Press and hold the PTT Button. The "TX" icon will appear on the display.
  3. Pause briefly after pressing PTT, then speak clearly into the microphone (approx. 2-3 inches away).
  4. Release the PTT Button when you finish speaking. The "TX" icon will disappear, and the radio will be ready to receive.

During transmission and reception, keep the antenna as vertical as possible and avoid obstructions.

5.5. Monitor Mode Feature

The Monitor function allows you to listen for weak signals on the current channel by temporarily opening the squelch.

  1. Press and hold the MONI Button to activate Monitor mode. The receiver circuit will open, allowing you to hear all signals and noise. The "RX" icon will blink.
  2. Release the MONI Button to exit Monitor mode. The "RX" icon will stop blinking.

5.6. Channel Scanning

The F22/T22 can automatically search for signals across PMR/FRS bands.

  1. Press the SCAN Button once to start scanning. When a signal is detected, scanning pauses on that channel.
  2. You can transmit on the detected channel by pressing PTT.
  3. Use the ▲ UP Button or ▼ DOWN Button to change the scanning direction or skip communications.
  4. Press the SCAN Button again to stop scanning. The radio will return to the channel from which scanning started.

5.7. Keypad Lock

To prevent accidental changes to radio settings:

  1. Press and hold the MENU/Lock Button for 3 seconds. The lock icon will appear on the display.
  2. While locked, only the PTT Button, CALL/Power Button, and MONI Button remain active.
  3. To unlock, press and hold the MENU/Lock Button for 3 seconds again.

5.8. VOX Function (Hands-Free Operation)

VOX allows for hands-free communication.

  1. Press the MENU/Lock Button 4 times until "VOX" appears on the display.
  2. Use the ▲ UP Button or ▼ DOWN Button to select the desired sensitivity level (1-3, where 1 is high sensitivity and 3 is low sensitivity).
  3. Press the PTT Button to exit the menu or the MENU/Lock Button to continue setup.
  4. To disable VOX, select "oF" (Off) in the VOX setting.

5.9. Call Tones

The radio offers 10 selectable call tones to alert other users.

  1. Press the MENU/Lock Button 5 times until "CA" appears on the display.
  2. Use the ▲ UP Button or ▼ DOWN Button to preview the 10 pre-set melodies.
  3. Press the PTT Button to exit the menu or the MENU/Lock Button to continue setup.
  4. To transmit a call tone, set both radios to the same channel and sub-code, then press the CALL/Power Button.
  5. To disable call tones, select "oF" (Off) in the call tone setting.

5.10. Emergency Alert

The Emergency Alert feature can signal group members for help.

  1. Press the MENU/Lock Button 6 times until the display shows the emergency alert icon.
  2. Use the ▲ UP Button or ▼ DOWN Button to select the alert type: "oF" (Disabled), "1" (Local alarm - radio emits sound), or "2" (Send alarm tone on current channel).
  3. Press the PTT Button to exit the menu or the MENU/Lock Button to continue setup.
  4. To activate the emergency alert, press and hold the Emergency Button for 3 seconds. The radio will emit a loud siren and the flashlight will flash.
  5. Press the Emergency Button again to exit the emergency alert function.

WARNING: The Emergency Alert feature should only be used in a genuine emergency.

5.11. Roger Beep (End Transmission Tone)

The Roger Beep sounds when you release the PTT Button, signaling to the other party that you have finished speaking. This feature is enabled by default.

  1. Press the MENU/Lock Button 8 times until "rb on" appears on the display.
  2. Use the ▲ UP Button or ▼ DOWN Button to select "rb oF" (Off).
  3. Press the PTT Button to exit the menu or the MENU/Lock Button to continue setup.

5.12. Dual Watch Mode

Dual Watch allows the radio to monitor two channels for activity.

  1. Press the MENU/Lock Button 9 times until "oF du" appears on the display.
  2. Use the ▲ UP Button or ▼ DOWN Button to select the second channel, then press MENU/Lock Button.
  3. Use the ▲ UP Button or ▼ DOWN Button to select the CTCSS/DCS tone for the second channel, then press MENU/Lock Button.
  4. The radio will begin Dual Watch, alternating between the home channel and the selected second channel.
  5. To exit Dual Watch mode, press the SCAN Button.

Note: Dual Watch will not function if the same channel and sub-code are set for both channels.

5.13. Flashlight Function

The radio has a built-in LED flashlight.

  1. Short press the Emergency Button to turn the flashlight on.
  2. Short press the Emergency Button again to make the flashlight blink.
  3. Short press the Emergency Button a third time to turn the flashlight off.

5.14. NOAA Weather Channels (USA Only)

The FRS version of the radio (for USA) supports 12 NOAA Weather channels to receive weather alerts.

  1. To access NOAA channels, navigate through the channels using the ▲ UP Button or ▼ DOWN Button until you find the NOAA weather channels (typically channels 8-12 in FRS mode, or as indicated on the display).
  2. When the weather alarm function is activated, the radio will alert you to severe weather risks.
Image showing NOAA Service features with icons for Blizzard, Fires, Earthquakes, Rainstorm.
Figure 3: NOAA Weather Service

6. User Tips

  • Range Optimization: For best range, especially in open areas, ensure the antenna is vertical and minimize obstructions like buildings, trees, or metallic structures. While the advertised range can be up to 3-5km, actual range in urban areas is typically 1-2km.
  • Battery Choice: The radio comes with rechargeable Li-ion batteries. If using AAA batteries, note that alkaline AAA batteries are for replacement only and cannot be recharged. NiMH AAA batteries can be recharged and recycled.
  • Programming: The radio features a 2-pin Kenwood headset jack and a programming port, suggesting it can be programmed for specific channels or settings using appropriate software and cables (not included).
  • Multi-Unit Communication: If you purchase multiple sets of these radios, they will communicate with each other as long as they are set to the same channel and privacy code.
  • Manual Availability: A PDF version of the user manual is available for download at User manual (PDF).

7. Maintenance

To ensure years of reliable performance from your F22/T22 radio, please follow these suggestions:

  • Do not attempt to open the unit. Non-expert handling may damage it and void the warranty.
  • When using a regulated power supply, ensure the output voltage is 5V to prevent damage.
  • Avoid high temperatures, as they can shorten the life of electronic devices and deform plastics.
  • Do not store the radio in dusty or dirty areas.
  • Keep the radio dry. Rainwater or dampness can corrode electronic circuits.
  • If the radio emits a peculiar smell or smoke, immediately turn it off and remove the battery or charger.
  • Do not transmit without an antenna.

8. Troubleshooting

  • No Power: Ensure the battery is correctly installed and fully charged. Check if the radio is turned on by pressing and holding the CALL/Power Button.
  • Cannot Transmit/Receive: Verify that both radios are on the same channel and have the same CTCSS/DCS privacy code. Check if the keypad lock is active. Ensure the battery has sufficient charge.
  • Poor Audio Quality/Short Range: Check antenna connection. Ensure there are no major obstructions between radios. Move to an open area if possible. Adjust volume.
  • Keypad Unresponsive: Check if keypad lock is active. Press and hold the MENU/Lock Button for 3 seconds to unlock.
  • Charging Issues: Ensure the charger is properly connected to a power source and the radio. Check the battery icon on the display for charging status.

9. Technical Specifications

CategorySpecification
General Part
Frequency Range446.00625 - 446.19375 MHz (PMR446) / FRS 462MHz
Channels16 PMR / 22 FRS (12 NOAA for USA)
Working Temperature-10°C to +50°C
Operation VoltageDC 3.7 V ±10%
Operation ModeSimplex
Dimensions5.48*17.5*3.4cm (include antenna) / 168mm×57mm×34.5mm (without Antenna)
Weight150g (Battery pack included)
Antenna Impedance50ohm
CategoryB
Transmitter Part
Frequency Stability±2.5ppm
RF Output Power≤500mW ERP (PMR446) / ≤2W (FRS)
Max Frequency Deviation≤2.5KHz
Audio Distortion<3%
Adjacent Channel Power< 60dB
Receiver Part
Receive Sensitivity< 0.2µV @20dB SINAD
Audio Distortion<3%
Audio Response300 Hz ~ 3 KHz

10. Warranty & Support

The BAOFENG F22/T22 is designed for long-lasting performance. For warranty inquiries or technical support, please contact your local Baofeng helpdesk or the dealer from whom you purchased this radio. You may also send an email to wangjianhui@baofengradio.com.

10.1. EU Declaration of Conformity

Baofeng and Pofung declare that the radio equipment type listed in the Technical Specifications complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: http://www.pofung.cn/download.asp?EnBigClassName=EU%20DOC.

10.2. Disposal Information

All articles displaying the crossed-out wheeled bin symbol on the body, packaging, or instruction manual must not be disposed of in normal household waste bins. Instead, they should be taken to specialized waste disposal centers. This ensures that materials are separated and recycled, contributing significantly to environmental protection.

11. Product Demonstration Video

Watch this video for a visual guide on battery installation, belt clip attachment, port usage, turning on the radio, changing channels, adjusting volume, accessing NOAA channels, using the flashlight, setting sub-codes, VOX, call tone, SOS, beep, Roger beep, and dual watch functions.

12. PDF User Manual

For a complete and detailed user manual in PDF format, please refer to the official document:

View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.