1. Introduction
This manual provides instructions for the assembly and proper use of your MOC-75302 Display Stand, designed specifically for the Imperial Shuttle 75302 building block model. This stand allows you to showcase your model in an upright, dynamic position, enhancing its display value.
2. Safety Information
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This product contains small building block pieces. Keep out of reach of small children to prevent choking hazards.
- Ensure all connections are secure during assembly to maintain the stability of the stand and the model placed upon it.
3. Package Contents
Your package should contain the following:
- Approximately 69 pieces of good quality ABS plastic building bricks.
- An electronic PDF building instruction guide (sent via email after order submission).
Please note: The product package does not contain stickers and is electronically printed. Printed parts are replaced by ordinary parts and do not contain third-party accessories. The manual and renderings are for reference only and are subject to the actual parts package.
4. Assembly Instructions
This display stand is a MOC (My Own Creation) product and does not come with a paper manual. A detailed PDF building instruction guide will be sent to your email address after your order is submitted. Please refer to this PDF for step-by-step assembly.
General Assembly Overview:
- Identify Components: Separate the base plates, vertical support beams, and connecting bricks.
- Construct the Base: Assemble the wider base sections that provide stability.
- Build the Vertical Supports: Connect the longer beam pieces to form the angled support structure.
- Attach Top Connector: Secure the top plate where your Imperial Shuttle model will rest.
- Finalize Connections: Ensure all bricks are firmly pressed together for a stable structure.
5. Operating Instructions
Once the display stand is fully assembled and stable, you can place your Imperial Shuttle 75302 model onto it.
- Carefully lift your Imperial Shuttle 75302 model.
- Align the designated connection points on the underside of your model with the top connector bricks of the display stand.
- Gently lower the model onto the stand, ensuring a secure fit. The stand is designed to hold the model at an angle for optimal viewing.
- Verify that the model is balanced and stable on the stand before leaving it unattended.
6. Maintenance
To keep your display stand in optimal condition:
- Cleaning: Use a soft, dry cloth to gently wipe away dust. For more stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
- Storage: If disassembling for storage, keep all pieces together in a container to prevent loss.
7. Troubleshooting
Issue: Missing or Damaged Parts
- Solution: All parts are quality checked before shipping. If you find any missing or damaged parts upon arrival, please do not worry. Contact the seller immediately, and they will send replacements free of charge.
Issue: Stand is unstable after assembly
- Solution: Carefully review the PDF building instructions to ensure all pieces are correctly placed and firmly connected. Disassemble and reassemble any sections that appear loose.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | MOC Stand for Imperial Shuttle 75302 |
| Pieces | 69 |
| Material | ABS Plastic |
| Block Shape | Self-Locking Bricks |
| Block Size | Small building block (Compatible with Lego) |
| Is Electric | No Battery |
| Gender | Unisex |
| Recommended Age | 12+y, 18+, 14+y |
| Origin | Mainland China |
| Certification | 3C |
| Available Colors | Black, Gray |
| Package Length | 25 cm |
| Package Width | 18 cm |
| Package Height | 10 cm |
| Package Weight | 0.658 kg |
9. User Tips
- Always double-check that all pieces are present before starting assembly.
- When assembling, apply firm, even pressure to ensure bricks are fully connected.
- If you plan to move your displayed model frequently, consider disassembling the stand for transport to prevent accidental damage.
10. Warranty and Support
For any questions, concerns, or to request the electronic PDF building instruction guide, please contact the seller directly. They are available to assist with missing or damaged parts and provide support for your product.