LEFOO LFDS63

Contents

LEFOO LFDS63 Digital Display Pressure Controller User Manual

Electronic Automatic Air Pump, Water, Oil Compressor Pressure Switch

1. Product Overview

The LEFOO LFDS63 series is an advanced digital display pressure controller designed for precise measurement and automatic control of pressure in various industrial applications. It integrates a high-reliability sensor with a back-end circuit to display real-time pressure readings and manage relay outputs based on user-defined pressure thresholds. Featuring an engineering plastic shell and a high-contrast LCD display, the LFDS63 offers anti-vibration capabilities, long lifespan, ease of operation, high stability, and clear display.

Front view of the LEFOO LFDS63 Digital Display Pressure Controller, showing the LCD screen and control buttons (SET, Up, Down, ON/OFF).

Figure 1: Front view of the LFDS63 Pressure Controller with display and control buttons.

Side view of the LEFOO LFDS63 Pressure Controller, highlighting the cable glands and the brass pressure connection.

Figure 2: Side view showing cable glands and pressure connection.

2. Specifications

Table presenting the technical specifications of the LFDS63 Pressure Controller, including pressure range, proof pressure, medium, voltage, power, load, IP class, connection, accuracy, and temperature ranges.

Figure 3: Technical Specifications Table.

Feature Vacuum Model Low-pressure Model Mid-pressure Model
Pressure Range -101.3~10kPa 0~1.6MPa 0~2MPa
Proof Pressure 1.5 times 2 times
Medium Air, noncorrosive gas
Rated Working Voltage 220VAC
Power Consumption 1.3W (No Load)
Load 200VAC 10A (Max)
IP Class IP52
Connection Brass NPT1/4 male (Default G1/4, contact seller for changes)
Accuracy ±1%F.S
Storage Temperature -10~60℃
Operation Temperature 0~50℃
Dimension (with connection) 80*88*110mm
Certification CE
Origin Mainland China

Dimensional Drawing

Dimensional drawing of the LFDS63 Pressure Controller, with measurements in millimeters.

Figure 4: Dimensions of the LFDS63 unit in millimeters.

3. Model Selection Guide

The LFDS63 series offers various configurations based on pressure range, output type, special functions, and connection type. Use the following guide to understand the model numbering system.

Image showing the LFDS63 Series Order Reference Number format: LFDS630-S-T-R, with labels A, B, C, D.

Figure 5: LFDS63 Series Order Reference Number Format.

Code Description Category
LFDS63 Pressure Controller Model
2 Mid-pressure (0~2.0MPa) Pressure Range (A)
1 Low-pressure (0~1.0MPa)
0 Vacuum (-101.3~10KPa)
No code (default) Single AC220V output Output (B)
s Single relay switch output
D Double relay switch output
No code (default) No special function (Routine) Special Function (C)
T Intelligent time control
No code (default) / G G1/4 Connection (D)
N NPT1/4
R R1/4
220V AC220V Power Supply
110V AC110V

Example of Selection: LFDS630-S-J-G-110V would indicate a LFDS63 Pressure Controller, Vacuum pressure range, Single Switch Output, Custom customization special function, G1/4 connection, and 110V AC power supply.

4. Setup and Installation

4.1 Physical Installation

  1. Mounting: Secure the controller in a suitable location, ensuring it is protected from excessive vibration and direct impact. Refer to the dimensional drawing (Figure 4) for mounting considerations.
  2. Pressure Connection: Connect the pressure source to the brass NPT1/4 male connection port at the bottom of the unit. Ensure a tight, leak-free seal. Note that the default interface type is G1/4; if your model has a different connection type (NPT1/4 or R1/4), ensure compatibility with your system.

4.2 Electrical Wiring

The device operates on 220VAC (or 110VAC depending on model). Wiring should be performed by a qualified electrician in accordance with local electrical codes.

  1. Identify the power input terminals.
  2. Connect the appropriate AC voltage supply (220VAC or 110VAC) to the power input terminals.
  3. Identify the relay output terminals.
  4. Connect the load (e.g., air pump, water pump, oil compressor) to the relay output terminals. The maximum load is 200VAC 10A.
  5. Ensure all connections are secure and insulated to prevent short circuits.

Warning: Incorrect wiring can cause damage to the device or connected equipment, and poses a risk of electric shock. Always disconnect power before wiring.

5. Operating Instructions

5.1 Basic Operation

The controller monitors pressure in real-time and controls the connected equipment (e.g., pump) by switching its relay output ON or OFF based on set pressure values.

Diagram illustrating the relay working mode, showing pressure (Hi-P, Lo-P) and ON/OFF states.

Figure 6: Relay Working Mode Diagram.

  • Hi-P: Represents the OFF pressure value. When the pressure reaches or exceeds this value, the relay will switch OFF.
  • Lo-P: Represents the ON pressure value. When the pressure drops to or below this value, the relay will switch ON.

5.2 Control Panel

The front panel (Figure 1) features an LCD display and four buttons:

  • SET: Used to enter programming mode and confirm settings.
  • ▲ (Up Arrow): Used to increase values or navigate menu options.
  • ▼ (Down Arrow): Used to decrease values or navigate menu options.
  • ON/OFF: Used to manually turn the controlled equipment ON or OFF, or to exit programming mode.

5.3 Setting Pressure Thresholds (Hi-P and Lo-P)

Detailed instructions for setting Hi-P and Lo-P values are typically found in the full operating manual. Generally, the process involves:

  1. Pressing the SET button to enter programming mode.
  2. Using the ▲ and ▼ buttons to navigate to the Hi-P (OFF pressure) setting.
  3. Pressing SET again to edit the Hi-P value, then using ▲ and ▼ to adjust.
  4. Pressing SET to confirm the Hi-P value.
  5. Repeating steps 2-4 for the Lo-P (ON pressure) setting.
  6. Exiting programming mode by pressing the ON/OFF button or waiting for a timeout.

The controller also supports a lock protection feature to prevent accidental changes to parameters. Refer to the comprehensive operating instructions for specific steps on parameter adjustment and lock protection.

6. Maintenance

  • Cleaning: Keep the unit clean and free from dust and debris. Use a soft, dry cloth for cleaning the exterior. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically inspect the pressure connection for leaks and the electrical wiring for signs of wear or damage.
  • Environmental Conditions: Ensure the operating and storage temperatures remain within the specified ranges (Operation: 0~50℃, Storage: -10~60℃) to ensure optimal performance and longevity. The unit has an IP52 rating, meaning it is protected from limited dust ingress and protected from water spray less than 15 degrees from vertical. Avoid exposing it to heavy rain or direct water jets.

7. Troubleshooting

This section provides solutions to common issues. For problems not listed here, contact technical support.

Problem Possible Cause Solution
Display is blank No power supply; Incorrect wiring; Unit failure. Check power connections and voltage. Verify wiring. If problem persists, contact support.
Controller not switching ON/OFF at set points Incorrect Hi-P/Lo-P settings; Sensor malfunction; Relay failure. Verify Hi-P and Lo-P settings. Check pressure sensor connection. Contact support if issues continue.
Inaccurate pressure readings Sensor calibration issue; Clogged pressure port; External interference. Ensure pressure port is clear. Recalibrate if possible (refer to full manual). Contact support.
"WARNING" indicator is lit Indicates an abnormal condition or error. Consult the full operating manual for specific warning codes or contact technical support for diagnosis.

8. User Tips

  • For optimal performance, ensure the pressure controller is installed in an environment free from excessive moisture, dust, and corrosive gases.
  • Regularly check the pressure connection for any signs of leakage, which can affect accuracy and system efficiency.
  • When setting the Hi-P and Lo-P values, ensure there is a sufficient differential to prevent rapid cycling of the connected equipment, which can reduce its lifespan.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original seller or the manufacturer directly. Keep your purchase receipt and model number (LFDS63) handy when contacting support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.