Introduction
This manual provides essential information for the safe and effective use of your COB RGBCCT LED Strip Lights. Please read it thoroughly before installation and operation, and keep it for future reference.
Package Contents
Your package should contain the following items:
- 1 × 5m COB LED Strip (power supply and adapter are not included)
Safety & Warnings
- Always follow installation and operation guidelines to avoid injury.
- Inspect the product before each use; do not use if damaged.
- Do not turn on the LED strip when it's rolled together. The strip must be spread out to ensure proper heat dissipation.
- Do not expose the strip to water or moisture unless it is explicitly a waterproof model. This product is IP20 (non-waterproof).
- 12V and 24V LED strip lights are not direct wire strip lights. Do not connect them directly to 110V/220V AC electricity. Only high voltage 110V/220V LED strips are designed for direct connection.
Specifications
The COB RGBCCT LED Strip Lights offer high density and flexible lighting solutions. Below are the detailed specifications:
Image: Detailed specifications for RGBW-784 LEDs/m and RGBCCT-840 LEDs/m variants, including power, voltage, CRI, LED quantity, cutting unit, lumen, PCB size, IP rate, and viewing angle.
| Attribute | Value |
|---|---|
| Brand Name | COXO |
| Item Type | Strip |
| Strip Type | COB |
| Length | 5 meters |
| Input Voltage | DC24V |
| Wattage | 20W/M (RGBW-784 LEDs/m), 21W/M (RGBCCT-840 LEDs/m) |
| FPCB Width | 12mm |
| FPCB Height | 1.6mm |
| LED Quantity | 840 LEDs/M |
| Cutting Length | 41.5mm (for 24V RGBCCT-840 LEDs/m), 71.5mm (for 24V RGBW-784 LEDs/m) |
| Colors | RGB+WW+CW, Any Colors Changeable |
| Color Rendering Index (CRI) | Ra>90 |
| Luminous Flux | 840-900 lumen/m (RGBW), 1100-1200 lumen/m (RGBCCT) |
| Operation Temperature | -20℃ to +45℃ |
| Storage Temperature | -20℃ to +60℃ |
| View Angle | 180° |
| Average Life (hrs) | 50000 |
| Waterproof | No (IP20) |
| Power Source | DC |
| Power Generation | Switch |
| Is Smart Device | No |
| Origin | Mainland China |
Setup & Installation
A simple installation requires the LED light strip, a compatible DC24V power supply, and appropriate LED wires. Please ensure you have these components before proceeding.
Installation Steps:
- Prepare Components: Gather your COB LED strip, a DC24V power supply, and any necessary LED wires.
- Power Supply Connection: Connect one end of the power supply to the low voltage DC24V LED strip. The other end of the power supply should be connected to a 110V/220V home electricity source. Ensure the power supply provides the correct voltage (DC24V) and sufficient amperage for the entire length of the light strip.
- Polarity Check: When connecting the power supply to the light strip, always pay close attention to the polarities (+, -). Connecting with incorrect polarities can damage the LEDs.
- Running Length: For optimal performance and brightness, the recommended running length for powering from one side is 5 meters. For lengths exceeding 6 meters, it is recommended to connect in parallel to maintain consistent brightness.
- Power Supply Capacity: Ensure that the total wattage of the COB Strip lights is less than 80% of the power supply's maximum output capacity to prevent overloading.
- Mounting: The strip features double-sided tape for easy installation. Ensure the surface is clean and dry before applying.
- Flexibility: The strip is bendable and can be folded into various shapes for creative lighting designs.
- Cutting: The strip is cuttable at designated marks (every 41.5mm for RGBCCT-840 LEDs/m or 71.5mm for RGBW-784 LEDs/m). The remaining part of the LED strip will continue to function normally.
Wiring Diagram:
Image: A simplified wiring diagram showing the connection from AC 110V-220V to a Power Supply, then to an RGBW/RGBCCT Controller, and finally to the LED strip, with clear polarity markings.
Note: This product is IP20 (non-waterproof). Avoid exposure to water or moisture.
Image: Visual guide demonstrating the safety of low voltage (DC12V/DC24V), the bendable nature of the strip, how it can be cut at marked intervals, and the strong double-sided tape for easy installation.
Operating Instructions
Your COB RGBCCT LED Strip Lights offer versatile lighting options. To operate:
- Power On/Off: Use the switch on your connected power supply or controller to turn the lights on or off.
- Color Changing: The strip supports RGB+WW+CW, allowing for a wide range of colors. Use a compatible RGBW/RGBCCT controller (not included) to select desired colors and color temperatures (warm white to cool white).
- Dimming: The lights are dimmable. Adjust the light intensity using a compatible dimmer or controller.
Video: Demonstration of the COB LED strip lights changing through various colors and color temperatures, showcasing its versatility.
Image: Visual representation of the dimming capability, illustrating brightness levels from 20% to 100% in a room setting.
Image: A collage displaying the COB LED strip emitting a wide spectrum of colors, from various shades of white to vibrant RGB hues.
Maintenance
- Cleaning: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or abrasive materials.
- Inspection: Periodically check the strip for any signs of damage, such as cuts, frayed wires, or loose connections. If damage is found, discontinue use and replace the affected section or the entire strip.
- Storage: If storing the LED strip, ensure it is kept in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED strip does not light up. | No power, incorrect voltage, incorrect polarity, damaged strip/power supply. |
|
| Lights are dim or inconsistent. | Insufficient power, excessive running length, faulty connection. |
|
| Colors are not changing or incorrect. | Controller issue, incorrect wiring to controller. |
|
User Tips
- Choosing Connectors: If you need to connect multiple segments or extend the strip, look for 6-pin COB LED strip connectors compatible with DC24V RGBCCT strips. Ensure they are designed for the 12mm FPCB width.
- Power Supply Sizing: Always calculate the total wattage required for your LED strip installation and select a power supply that provides at least 20% more wattage than your total load to ensure longevity and stable performance.
- Surface Preparation: For best adhesion of the double-sided tape, thoroughly clean the installation surface with isopropyl alcohol and let it dry completely before applying the strip.
Compliance Information
This product complies with the following standards:
- CE (Conformité Européenne)
- RoHS (Restriction of Hazardous Substances)
- cULus LISTED (Underwriters Laboratories - US and Canada)
- UKCA (UK Conformity Assessed)
The product is manufactured in Mainland China.
Image: A reel of COB RGBCCT LED Strip Lights, highlighting the COXO brand and RGBW/RGBCCT capabilities.
Warranty & Support
For detailed warranty information and customer support, please refer to the official product page or contact the manufacturer directly. A user manual in PDF format is also available for download:
Manufacturer: Shenzhen Coxo Technology Co., Limited
Address: 6th Floor, Building 7, HKC Industrial Park, No. 1, Gongye 2nd Road, Shiyan Street, Bao'an District, Shenzhen, Guangdong, China 518108
Email: u@coxotech.com
EU Representative: KD EUROPE
Address: Stara Debszczyzna 4, 16-424, Filipow, PL
Email: Kdeurope.office@gmail.com
Tel: +48 510181779