1. Product Overview
The MILESEEY S2 Laser Distance Meter is a high-accuracy digital measuring tool designed for various applications, including indoor, outdoor, tunnel, and warehouse environments. It features multiple measurement modes, a clear LCD display, and robust construction.

Figure 1: MILESEEY S2 Laser Distance Meter
Key Features:
- High Accuracy: Up to ±2mm.
- Multiple Measurement Modes: Single distance, Area, Volume, Pythagorean (2-point and 3-point), Auto Level, Auto Height, Continuous Measurement, Addition/Subtraction.
- Electronic Angle Sensor: For real-time angle measurement and advanced functions.
- Large LCD Display: 2-inch easy-read display with backlight.
- Data Storage: Stores up to 20 groups of measurements.
- Durable Design: Shockproof and dropproof.
- Unit Switching: Easily switch between meters (m), feet (ft), inches (in), and feet+inches (ft+in).
- Mute Function.
Product Video:
Video 1: MILESEEY S2 Product Demonstration and Features Overview.
2. Package Contents
Please check the package for the following items:
- MILESEEY S2 Laser Distance Meter
- Wrist Strap
- Protective Pouch
- User Manual (this document and a printed version)
- USB Charging Cable

Figure 2: Package List
3. Setup and Basic Operation
3.1 Powering On/Off
- Power On: Press the MEAS button (red button) or the Power button (red button with power symbol).
- Power Off: Press and hold the Power button for a few seconds, or the device will automatically shut off after a period of inactivity to save battery.
3.2 Charging the Device
The MILESEEY S2 is rechargeable. Connect the provided USB charging cable to the device's charging port and a suitable USB power source (e.g., computer, wall adapter). The battery indicator on the display will show charging status.
3.3 Setting Reference Point
The device can measure from its front or rear edge. This is crucial for accurate measurements.

Figure 3: Front and Back Reference Points. Use the reference point button to toggle.
- Press the reference point button (usually indicated by an icon showing the device's base) to switch between front and rear measurement.
- An icon on the display will indicate the currently active reference point.
3.4 Switching Measurement Units
The device supports multiple units of measurement (meters, feet, inches, feet+inches).

Figure 4: Unit Switching. Long press the UNIT button to cycle through units.
- Long press the UNIT button to cycle through the available units: m → ft → in → ft+in.
3.5 Mute Function
To mute or unmute the device's sound, press the mute button (speaker icon).
4. Measurement Modes
The MILESEEY S2 offers a variety of measurement functions to suit different needs.

Figure 5: Multiple Measurement Modes.
4.1 Single Distance Measurement
- Press the MEAS button once to activate the laser.
- Aim the laser at the target point.
- Press the MEAS button again to take the measurement. The result will be displayed on the screen.
4.2 Continuous Measurement (Tracking)
- From standby, press and hold the MEAS button. The device will continuously measure as you move it.
- The maximum and minimum values will be displayed, along with the current measurement.
- Press CLEAR to exit continuous measurement.
4.3 Area Measurement
- Press the Function button (usually square icon) until the area icon appears.
- Measure the length (L) and width (W) by pressing MEAS for each dimension.
- The device will automatically calculate and display the area.
4.4 Volume Measurement
- Press the Function button until the volume icon appears.
- Measure the length (L), width (W), and height (H) by pressing MEAS for each dimension.
- The device will automatically calculate and display the volume.
4.5 Pythagorean Measurement (Indirect Measurement)
The S2 supports 2-point and 3-point Pythagorean measurements for indirect height or distance calculations.
- Press the Function button until the desired Pythagorean mode icon appears (e.g., triangle with two sides known).
- Follow the on-screen prompts to measure the required sides (hypotenuse, base, etc.) by pressing MEAS for each.
- The device will calculate and display the unknown dimension.
4.6 Auto Level & Auto Height Measurement
These functions utilize the electronic angle sensor for automatic calculations.

Figure 6: Auto-Level and Auto-Height Measurement.
- Auto-Level: Measure only the hypotenuse. The horizontal distance, vertical height, and angle will be calculated automatically.
- Auto-Height: Measure two hypotenuses. The vertical height and angle will be calculated automatically.
- Press the Function button to select the appropriate mode and follow the on-screen instructions.
4.7 Addition/Subtraction Function
This allows for quick calculations of combined or differential measurements.

Figure 7: Addition/Subtraction Function.
- After taking a measurement, press the + or - button.
- Take the next measurement. The device will add or subtract it from the previous result.
4.8 Electronic Angle Sensor
The integrated electronic angle sensor provides real-time angle readings, useful for various applications and for enabling Auto Level/Height functions.

Figure 8: Electronic Level and Real Time Angle.
4.9 Data Storage
The device can store up to 20 groups of measurement data. Use the memory buttons to access and review stored measurements.
5. Maintenance
- Cleaning: Use a soft, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Pay special attention to the laser lens and display.
- Storage: Store the device in its protective pouch in a cool, dry place when not in use. Avoid extreme temperatures and direct sunlight.
- Battery Care: As the device is rechargeable, ensure it is charged regularly, especially if stored for long periods, to maintain battery health. Avoid fully discharging the battery for extended times.
- Water Resistance: The device is waterproof, but avoid submerging it in water or exposing it to heavy rain for prolonged periods.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery or device malfunction. | Charge the device. If it still doesn't power on, contact support. |
| Inaccurate measurements. | Incorrect reference point, unstable surface, or obstruction. | Verify the reference point setting. Ensure the device is stable and the laser path is clear. Measure to a flat, non-reflective surface. |
| Laser not visible or weak. | Bright ambient light or dirty lens. | Use in lower light conditions if possible. Clean the laser lens carefully. |
| Display is blank or frozen. | Software error or low battery. | Try restarting the device. Charge the battery. If the issue persists, contact support. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | MiLESEEY |
| Model Number | S2 |
| Measurement Range | Available in 50m, 70m, 100m, 120m variants |
| Accuracy | ±2mm |
| Laser Hazard Level | Class 2 (<1mW) |
| Power Type | Rechargeable (Battery Included: Yes) |
| Certification | CE, FCC |
| Display | 2" Large Easy Read LCD Display with Backlight |
| Data Storage | 20 Groups |
| Special Features | Electronic Angle Sensor, Mute Function, Waterproof, Shockproof & Dropproof |
| Origin | Mainland China |
8. User Tips
- Outdoor Use: For better visibility of the laser dot in bright outdoor conditions, consider using a laser target plate (not included) or measuring in shaded areas.
- Surface Matters: For optimal accuracy, always measure to a solid, non-reflective surface. Highly reflective or transparent surfaces can cause inaccurate readings.
- Battery Life: To prolong battery life, remember to turn off the device when not in use, or rely on its auto-off feature.
- Bluetooth/App Connectivity: Please note that this specific model (S2) does not feature Bluetooth connectivity or a companion app.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the official documentation provided with your product or contact the seller directly.
A comprehensive user manual in PDF format is also available for download: MILESEEY S2 User Manual (PDF).