MiBoxer TRI-C1ZR

Contents

MiBoxer AC Triac Dimmer (Zigbee 3.0+2.4G+Push) Instruction Manual

Model: TRI-C1ZR | Brand: MiBoxer

1. Introduction

The MiBoxer TRI-C1ZR AC Triac Dimmer is a versatile smart lighting control device designed for traditional incandescent lamps, halogen lamps, and triac dimmable LED lamps. It integrates Zigbee 3.0, 2.4G, and Push dimming technologies, offering flexible control options including smartphone app, wireless remote, and voice control via popular platforms like Amazon Alexa and Google Home. This manual provides comprehensive instructions for installation, operation, and maintenance to ensure optimal performance and safety.

MiBoxer TRI-C1ZR AC Triac Dimmer with Zigbee, 2.4G, and Push control

Figure 1: MiBoxer TRI-C1ZR AC Triac Dimmer

2. Key Features

  • Zigbee 3.0 Standard Protocol: Ensures broad compatibility with Zigbee 3.0 gateways.
  • Smartphone APP Control: Requires a Zigbee 3.0 gateway (purchased separately) for full functionality.
  • 2.4G RF Wireless Remote Control: Offers convenient control with compatible remotes (purchased separately).
  • Push Dimming Function: Allows for direct control via a push switch.
  • Trailing Edge Phase-Cut Technology: Provides smooth, flicker-free dimming from 0-100%.
  • Lowest Brightness Setting Function: Customize the minimum brightness level.
  • Built-in Temperature Detecting Switch: Includes overheat and overload protection for safety.
  • Auto Transmitting Function: Extends control distance with unlimited range between dimmers.
  • Screw Connector: Reliable and easy for installation.
  • Anti-PC Fire Shell: Enhanced safety with fire-resistant material.
  • Voice Control Support: Compatible with Amazon Alexa and Google Home (requires Zigbee 3.0 gateway).
Diagram illustrating Trailing Edge (ELV) phase-cut technology

Figure 2a: Trailing Edge Technology

Diagram showing overheat and load protection features

Figure 2b: Overheat/Load Protection

3. Specifications

AttributeValue
Model No.TRI-C1ZR
Input Voltage100-240V~ 50/60Hz
Output Voltage100-240V~
Output CurrentMax 1.36A
Output Power150W @110V; 300W @220V
Dim MethodZigbee 3.0 + 2.4G + Push
Working Temperature-10~40℃
Zigbee Control Distance100m (open area)
2.4G RF Control Distance30m
Wireless TechnologyZigbee 802.15.4
Zigbee Wireless Frequency2.400-2.480GHz
MaterialABS Plastic
Warranty2 Years
CertificationCCC, CE, ROHS
Technical drawing with dimensions of the TRI-C1ZR dimmer, showing 49mm width, 49mm length, and 25mm height

Figure 3a: Product Dimensions and Indicator Light Location

Compatible lighting types: Single color Triac dimmable LED light, Traditional filament lamp, Halogen lamp

Figure 3b: Compatible Lighting Series

4. Setup and Installation

4.1. Connection Diagram

Ensure all cables are correctly connected before turning on power. Incorrect wiring can damage the dimmer.

Wiring diagram for the AC Triac Dimmer showing input (N, L) and output (N, L1) connections, and a PUSH switch. Input is AC100-240V. Output connects to Triac dimming LED light, Filament lamps, and Halogen lamps.

Figure 4a: Connection Diagram

  • Connect the Input terminals (N, L) to your AC power supply (100-240V~).
  • Connect the Output terminals (N, L1) to your dimmable light fixture (Triac dimming LED light, Filament lamps, or Halogen lamps).
  • Optionally, connect a PUSH switch to the S1 and S2 terminals for manual dimming control.

4.2. Installation Diagram

The dimmer supports installation in standard standing junction boxes. Ensure the depth of the junction box is over 50mm.

Installation diagram showing the dimmer fitting into a junction box with a push switch. The depth of the junction box is over 50mm.

Figure 4b: Installation Diagram

5. Operating Instructions

5.1. PUSH Dimming

Diagram illustrating push dimming functionality: short press for ON/OFF, long press for stepless dimming

Figure 5a: PUSH Dimming Overview

  • Short press PUSH switch: Turns the light ON/OFF.
  • Long press PUSH switch: Provides stepless dimming brightness. Press and release your finger, then repeat long pressing to increase or decrease brightness.
  • Synchronized Dimming: Long press the switch for 20 seconds until all lights have the same brightness with 100% level if multiple dimmers are connected with the same self-return switch. The connection cable for the self-return switch should not exceed 20m, and the quantity of dimmers should not exceed 25 pieces.

5.2. Remote Control Instruction (Remotes purchased separately)

The TRI-C1ZR is compatible with various MiBoxer remotes. Refer to the remote's manual for specific pairing instructions.

Images of various compatible MiBoxer remote controls (C3, Y1, Y2, C1, K0, K3, K3S, K2S, K2, K1, T1, T2, B1, B5, B2, FUT006, FUT007, FUT094, S1W+, S1-B)

Figure 5b: Compatible Remote Controls

5.2.1. Linking Remote (e.g., K1 remote)

Diagram showing linking process for K1 remote: short press SET, power cycle dimmer, short press Push switch

Figure 5c: K1 Remote Linking

  1. Learning code (K1 remote): Short press "SET" one time. The indicator light will burst. Power off the dimmer for 10 seconds, then power it on again. Short press the Push switch to keep the light ON.
  2. For other remotes: Press "SET" 3 times within 3 seconds. Linking is done once the light flashes 3 times slowly.

5.2.2. Unlinking Remote (e.g., K1 remote)

Diagram showing unlinking process for K1 remote: press SET 5 times quickly. For other remotes: press ON button 5 times quickly.

Figure 5d: Remote Unlinking

  1. Learning code (K1 remote): Press "SET" 5 times within 3 seconds. Unlinking is done once the light flashes 10 times quickly.
  2. For other remotes: Press the "ON" button in group zones 5 times within 3 seconds. Unlinking is done once the light flashes 10 times quickly.

5.2.3. Setting Minimum Brightness with Remote (e.g., K1 remote)

Attention: This function should be paired with the remote first before setting.

Instructions for setting minimum brightness with K1 remote: long press SET, then short press SET to cycle brightness levels, then short press rotating button to confirm.

Figure 5e: Setting Min Brightness with K1 Remote

  1. Long press "SET" for 3 seconds until the light flashes one time, indicating it's in flashing status.
  2. Short press "SET" to cycle through 10 kinds of brightness: 3%, 5%, 7%, 9%, 12%, 17%, 22%, 28%, 34%, 40%.
  3. Short press the rotating button to confirm the setting. If no action for 10 seconds, it will automatically confirm, and the light will recover to the previous level.

Attention: The Master OFF button can set the lowest brightness for all connected dimmers.

5.3. Smartphone APP Control (Tuya Smart)

To experience more functions, you need to match the Zigbee 3.0 gateway (purchased separately).

Tuya Smart app control features including timing setting, device sharing, tap-to-run & automation, on-off mode, and set up min brightness. Shows a smartphone controlling a light and a Zigbee 3.0 Gateway.

Figure 5f: Tuya Smart App Features

5.3.1. Pairing Network

  1. Connect the dimmer with power supply.
  2. Pairing network (factory default is pairing network):
    • Way 1: Long press "SET" about 3 seconds until the indicator flashes quickly.
    • Way 2: Long press the push switch for 10 seconds while the light is OFF (requires wiring with a Push switch).
  3. Open "TUYA Smart" APP, click on your Zigbee gateway, then click "Add sub device".
  4. Click "Indicator is flashing quickly".
  5. Support APP dimming or group control once added successfully.
Screenshots of the Tuya Smart app showing Zigbee Gateway and Add subdevice options, with an indicator flashing quickly.

Figure 5g: Tuya Smart App Pairing Process

5.3.2. App Set Up Lowest Brightness

Screenshots of the Tuya Smart app showing settings for minimum brightness, with a slider to adjust the level.

Figure 5h: Setting Lowest Brightness in App

The light will turn off if dim brightness is set to 1%. To increase the lowest brightness:

  1. Click "Settings" in the APP.
  2. Move the slider to finish setting the minimum brightness.

5.3.3. Breaker Mode (ON/OFF)

Attention: This mode only supports turning ON/OFF the light and cannot dim the light once activated.

Screenshots of the Tuya Smart app showing Breaker Mode settings, with an ON/OFF toggle.

Figure 5i: Breaker Mode in App

Setting way:

  1. Click "Settings" in the APP.
  2. Click the button on the right side of "Breaker Mode" to activate/deactivate.

5.4. Voice Control (Alexa & Google Home)

The dimmer supports third-party voice control. A Zigbee 3.0 gateway is required (purchased separately) to control ON/OFF, brightness, etc., through voice commands.

Logos for Amazon Alexa and Google Assistant, indicating voice control support. Also shows various smart speakers.

Figure 5j: Voice Control Compatibility

The dimmer can be integrated into standard Zigbee 3.0 gateways like Philips Hue, IKEA TRADFRI, Amazon Echo Plus (2nd Gen), Echo (4th Gen), Echo Studio, and Echo Show (2nd Gen).

5.4.1. Alexa Voice Control

Note: Amazon Echo devices may not support Zigbee 3.0 protocol directly. Please add the device into the MiBoxer Zigbee 3.0 gateway first.

Screenshots of Alexa app showing Skills & Games and Smart Life search, with instructions to enable the Smart Life skill.

Figure 5k: Alexa App Configuration

  1. Open the Alexa App.
  2. Click "More" on the bottom right corner, then "Skills & Games".
  3. Click "Q" on the top right corner and type "Smart life" to search.
  4. Click the "Smart life" skill, follow instructions to finish configuration and start voice control.
  5. Say to Amazon ECHO: "Alexa, Discover devices". Wait for a while to discover the device. Voice control is activated.

5.4.2. Google Home Voice Control

Screenshots of Google Home app showing device setup and Smart Life integration, with instructions to link the Smart Life account.

Figure 5l: Google Home App Configuration

  1. Open the Google Home App.
  2. Click "+" on the top left corner.
  3. Click "Set up device".
  4. Click "Works with Google".
  5. Click "Q" on the top right corner and type "Smart life" to search.
  6. Click the "Smart life" skill, follow instructions to finish configuration and start voice control.

5.4.3. Philips Hue Control Instruction

Add "Philips Hue" into the APP.

Screenshots of Philips Hue app showing adding lights and searching for devices, with options for settings and lights.

Figure 5m: Philips Hue App Configuration

Pairing Network:
  1. Connect with power supply.
  2. Pairing network (factory default is pairing network):
    • Way 1: Long press "SET" about 3 seconds until the indicator flashes quickly.
    • Way 2: Long press the push switch for 10 seconds while the light is OFF (requires wiring with a Push switch).
  3. Open "Philips Hue" App, click "SETTINGS" and click "Lights".
  4. Click "+" on the top right corner.
  5. Click "Search".
  6. Click "Start configuration", follow the app instruction to complete configuration.

6. Maintenance

  • Regularly check wiring connections for any looseness or damage.
  • Keep the device clean and free from dust. Use a dry, soft cloth for cleaning.
  • Do not use harsh chemicals or abrasive cleaners.
  • Ensure proper ventilation around the device to prevent overheating.

7. Troubleshooting

Light not turning ON/OFF or dimming:
  • Check power supply to the dimmer.
  • Verify all wiring connections are secure and correct as per the connection diagram.
  • Ensure the connected light bulb is dimmable and compatible with Triac dimmers.
  • If using a remote, ensure it is properly linked and has working batteries.
  • If using the app, check network connectivity and ensure the dimmer is paired with the gateway and app.
  • Check if "Breaker Mode" is activated in the app, as this prevents dimming.
Dimmer overheating:
  • Ensure the total load of connected lights does not exceed the maximum output power (150W @110V; 300W @220V).
  • Check for proper ventilation around the dimmer.
Remote control distance issues:
  • Ensure there are no strong electromagnetic waves or large metal objects nearby that could interfere with the signal.
  • The 2.4G RF control distance is 30m. For Zigbee, it's 100m in open areas.

8. User Tips

  • For best smart home integration, ensure your Zigbee 3.0 gateway is updated to the latest firmware.
  • When setting up voice control, use clear and concise commands. Practice common phrases to ensure smooth operation.
  • If experiencing issues with app control, try restarting both the dimmer (by cycling power) and the Zigbee gateway.
  • Consider using the auto-transmitting feature for larger installations to extend the effective control range.

9. Important Attention & Warnings

  • Please turn off the power supply before installation.
  • Ensure the input voltage matches the device requirements (100-240V~ 50/60Hz).
  • Do not disassemble the device if you are not an expert; otherwise, it may be damaged.
  • Avoid using the light in places with widely ranged metal areas or strong electromagnetic waves nearby, as this can seriously affect the remote distance.
  • The dimmer cannot be used in humid areas.
Warning symbols for CE, UKCA, RoHS, and 'Dimmer cannot be used in humid area'

Figure 9a: Compliance and Usage Warnings

10. Warranty and Support

This product comes with a 2-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.