Retekess TD033

Contents

RETEKESS TD033 Call Buttons Transmitter User Manual

Pager System Operating Instructions

1. Introduction

Notice

Thank you for choosing the SimpleUniversal Call Button! This product features a minimalist design, is easy to operate and install, and is suitable for various basic calling scenarios. To ensure smooth use, please read this instruction manual before use. If you have any questions, please refer to the FAQ or contact after-sales service.

Product Name

Simple Universal Call Button

Product Structure

The Retekess TD033 call button is designed for ease of use and durability.

External Structure:

  • Housing: ABS plastic material, compact and lightweight.
  • Call Button: Single-point button on the front, made of soft and comfortable silicone. Available in 1, 2, 3, or 4 key configurations.
  • Indicator Light: Embedded red LED light in the center of the button to indicate the call status.
  • Battery Compartment: Screw-down design on the back, housing one built-in specific model battery (23A12V).
  • Mounting Components: High-adhesion adhesive on the back, supporting adhesive installation without additional tools.
Retekess TD033 4-key call button held in hand
A Retekess TD033 4-key call button, showing 'PAY', 'CANCEL', 'CALL', and 'ORDER' functions.

Internal Structure:

  • Simple Wireless Module: Low-power design, stable signal, compatible with universal call hosts.
  • Trigger Switch: Linked with the button to ensure activation upon pressing.

Function Introduction

  • One-button Call: A simple press of the button triggers a call signal; easy to use, even for the elderly and children.
  • Status Indicator: The LED flashes (red) during a call and automatically turns off after a response.

Applicable Scenarios

The TD033 call button is ideal for small restaurants, convenience stores, offices, homes, small clinics, tea or coffee houses, spas and salons, health and fitness clubs, hotel conference rooms, executive dining rooms, saloons, nightclubs, bowling alleys, massage houses, churches, casinos, golf and country clubs, hospitals, health clubs, and offices, for basic call and assistance scenarios.

2. Setup

Installation Preparation

  1. Battery Installation: Unscrew the battery compartment cover on the back, insert one 23A12V battery (positive terminal up), and then tighten the cover.
  2. Mounting: Select a flat, dry mounting surface. Clean the surface thoroughly. Peel off the protective film from the adhesive backing on the call button and firmly attach the button in the desired location.
Back view of Retekess TD033 call button showing battery compartment and mounting holes
Rear view of the TD033 call button, indicating the battery compartment and adhesive mounting area.

Device Pairing

To pair the call button with a compatible Retekess wireless receiver (e.g., T128/TD108/TD110/TD106/TD112 Watch):

  1. Press and hold the call button for 5 seconds.
  2. The indicator light will flash rapidly, signaling that the device has entered pairing mode.
  3. Once the call host (receiver) displays "Pairing Successful," the indicator light on the call button will turn off, completing the pairing process.

3. Operating Instructions

Call Operation

To send a call signal, briefly press the call button on the front. The LED light will flash, indicating that a call signal has been successfully sent. The LED light will automatically turn off after the call is answered by the receiver.

Retekess TD033 1-key call button with 'CALL' label held in hand
A single-key TD033 call button, ready for operation.

4. Maintenance

Battery Replacement

If the indicator light does not illuminate or flashes weakly after pressing the button, the battery is low and needs replacement. Unscrew the battery compartment cover on the back and replace the 23A12V battery, ensuring the positive terminal is correctly oriented.

Precautions

  • Avoid direct sunlight or high-temperature, humid environments during installation and operation.
  • Do not press or drop the device forcefully to avoid damaging internal components.
  • Ensure the battery is installed correctly with the positive and negative terminals aligned to avoid short circuits.
  • When not in use for extended periods, remove the battery to prevent leakage and damage to the device.

5. Specifications

FeatureSpecification
Model NumberRetekess TD033
Operating Frequency433MHz
Wireless Coding1527
Operating VoltageDC12V (battery 23A12V)
Indicator LightRed
Range80m (open area)
Size70*70*16mm
Key Configuration1/2/3/4 series key
ColorBlack
Battery IncludedYes
High-concerned chemicalNone
OriginMainland China
CertificationNONE

Package Contents

The Retekess TD033 call button is typically available in packs. Please check your specific order for exact quantities.

  • Standard Package (e.g., Package1): 5 x Call Pager, 5 x Sticker
  • Larger Package (e.g., Package2): 10 x Call Pager, 10 x Sticker
Brown cardboard box with Retekess logo
Typical packaging for Retekess products.

6. Troubleshooting

Common Issues and Solutions

  • Button not responding / Indicator light not flashing:
    This usually indicates a low battery. Replace the 23A12V battery as described in the Maintenance section. Ensure the battery is inserted with the correct polarity.
  • Call signal not received by host:
    Verify that the call button is properly paired with your receiver. If not, repeat the Device Pairing steps. Ensure the button is within the 80m (open area) operating range of the receiver. Obstructions like walls can reduce effective range.
  • Accidental activation:
    Ensure the button is mounted on a stable, flat surface and not in a location where it can be accidentally pressed.

7. User Tips

  • Battery Life: The TD033 features a low power consumption design, with a single battery lasting for approximately 6000 cycles. This ensures long-term operation before needing replacement.
  • Key Configurations: The TD033 is available in 1, 2, 3, or 4 key configurations. Choose the configuration that best suits your specific needs (e.g., a single 'CALL' button for simple requests, or multiple buttons for 'PAY', 'CANCEL', 'CALL', 'ORDER').
  • Compatibility: This call button is designed to be compatible with various Retekess wireless receivers, such as T128, TD108, TD110, TD106, and TD112 watch pagers.

8. Warranty and Support

For any inquiries, technical support, or warranty claims, please contact Retekess directly using the information below. You can also refer to the official user manual PDF for additional details: Retekess TD033 User Manual (PDF)

Contact Information:

MADE IN CHINA

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.