1. Introduction
This manual provides comprehensive instructions for the Hama HM-136253 Digital Alarm Clock. Please read this manual carefully before using the device to ensure proper operation and to maximize its features.
2. Package Contents
Ensure all items are present in the package:
- Hama HM-136253 Digital Alarm Clock
- 2x AA Mignon Batteries
- User Manual (this document)
3. Product Overview
The Hama HM-136253 is a versatile digital alarm clock designed for ease of use and clear display of essential information.

Figure 3.1: Front view of the Hama HM-136253 Digital Alarm Clock, showing the digital display with time, date, temperature, and alarm settings.
Key Features:
- Digital time display with DCF radio clock function for automatic time synchronization.
- Two independent, programmable alarm times.
- Intuitive toggle switches for easy alarm activation and deactivation.
- Snooze function with increasing alarm volume and speed.
- White LED backlight, automatically activated in dark environments via a light sensor (can be toggled on/off).
- Large screen displaying time, temperature, date, and day of the week.
- Adjustable time zone.
- Low battery alert.
Controls and Display Elements:

Figure 3.2: Diagram illustrating the key controls and display features of the alarm clock, including snooze button, backlight, alarm toggle switches, and light sensor.
- Snooze Function / Light Button: Top button for snooze and manual backlight activation.
- White LED Backlight: Illuminates the display for visibility in low light.
- Two Alarm Times Programmable: Display shows two distinct alarm settings.
- Toggle Switches (AL1, AL2): Located on the side, these switches activate/deactivate the two independent alarms.
- Light Sensor: Automatically controls backlight activation in dark conditions.
- MODE/SET Button: For navigating modes and setting parameters.
- Up/Down Arrows: For adjusting values during settings.
4. Setup
4.1 Battery Installation
- Open the battery compartment cover on the back of the alarm clock.
- Insert two (2) AA Mignon batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
- The alarm clock will power on and begin initial setup.
4.2 Initial Time Setting (DCF Radio Clock)
The alarm clock is equipped with a DCF radio clock function, which automatically sets the time using a radio signal. Upon battery insertion, the clock will attempt to synchronize. This process may take several minutes.
- Place the alarm clock near a window for better signal reception.
- Avoid placing it near electronic devices that may cause interference.
- If synchronization is successful, the time will be set automatically.
4.3 Manual Time Setting (if DCF signal is unavailable)
If the DCF signal is weak or unavailable, you can set the time manually:
- Press and hold the "MODE/SET" button until the time display starts flashing.
- Use the "Up" or "Down" arrow buttons to adjust the hour.
- Press "MODE/SET" again to confirm the hour and move to minutes.
- Use the "Up" or "Down" arrow buttons to adjust the minutes.
- Continue pressing "MODE/SET" to cycle through and set date, year, and time zone if applicable.
- Press "MODE/SET" one last time or wait a few seconds for the settings to be saved.
4.4 Time Zone Adjustment
If you are in a different time zone than the DCF signal's origin, you can adjust the time zone offset. Refer to the manual time setting steps to access the time zone setting option.
5. Operating Instructions
5.1 Setting Alarms (AL1 and AL2)
The alarm clock features two independent alarms. To set an alarm:
- Press the "MODE/SET" button repeatedly until "AL1" or "AL2" appears on the display, and the alarm time starts flashing.
- Use the "Up" or "Down" arrow buttons to adjust the desired alarm hour.
- Press "MODE/SET" to confirm the hour and move to minutes.
- Use the "Up" or "Down" arrow buttons to adjust the desired alarm minutes.
- Press "MODE/SET" to save the alarm time.
- Repeat for the second alarm if needed.
5.2 Activating/Deactivating Alarms
Use the dedicated toggle switches on the side of the alarm clock to activate or deactivate each alarm independently.
- Slide the left toggle switch (AL1) up to activate Alarm 1, down to deactivate.
- Slide the right toggle switch (AL2) up to activate Alarm 2, down to deactivate.
- An alarm icon will appear on the display when an alarm is active.
5.3 Snooze Function
When an alarm sounds, press the "SNOOZE / LIGHT" button on top of the clock to activate the snooze function.
- The alarm will pause for approximately 4 minutes.
- You can activate the snooze function up to 6 times.
- Each subsequent snooze will result in an alarm tone with increasing volume and speed.
- The alarm duration is 2 minutes if not snoozed or turned off.
5.4 Backlight Operation
The white LED backlight provides illumination for the display.
- Automatic Backlight: The built-in light sensor can automatically turn on the backlight in dark environments. This feature can be toggled on or off via a setting (refer to the manual for specific steps, usually accessed through MODE/SET).
- Manual Backlight: Press the "SNOOZE / LIGHT" button to temporarily activate the backlight for a few seconds.
5.5 Key Tone Activation/Deactivation
The alarm clock may produce a key tone when buttons are pressed. This feature can usually be toggled on or off through the settings menu. Consult the specific steps in the manual by cycling through the "MODE/SET" options.
6. Maintenance
6.1 Cleaning
- Wipe the alarm clock with a soft, dry cloth.
- Do not use abrasive cleaners or solvents, as they may damage the surface.
- Avoid getting moisture into the device.
6.2 Battery Replacement
When the low battery alert appears on the display, replace the batteries promptly to ensure continuous operation and prevent data loss.
- Open the battery compartment cover.
- Remove the old batteries.
- Insert two new AA Mignon batteries, observing correct polarity.
- Close the battery compartment cover.
- Dispose of old batteries according to local regulations.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or depleted batteries. | Replace with new AA batteries. |
| Time is incorrect or not setting automatically. | Poor DCF radio signal reception; manual setting error. | Move the clock to a location with better signal (e.g., near a window). Try manual time setting. |
| Alarm does not sound. | Alarm not activated; alarm volume too low; incorrect alarm time set. | Ensure the side toggle switch for the desired alarm (AL1/AL2) is in the "ON" position. Verify alarm time. |
| Backlight not working automatically. | Light sensor feature is off; ambient light is too bright. | Check settings to ensure automatic backlight is enabled. Move to a darker area. |
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Hama |
| Model Number | HM-136253 |
| Type | Alarm Clock |
| Display Type | DIGITAL |
| Motivity Type | Digital |
| Material | Plastic |
| Shape | SQUARE |
| Function | Snooze Function |
| Feature | Calendars, LUMINOVA |
| Weight | 140g |
| Dimensions (L x W x H) | 9.4 x 2.5 x 10 cm |
| Power Source | 2x AA Mignon Batteries |
9. User Tips
- For optimal DCF radio signal reception, position the alarm clock away from large metal objects or other electronic devices that might cause interference.
- When replacing batteries, consider using high-quality alkaline batteries for longer life and consistent performance.
- If you travel frequently across time zones, remember to adjust the time zone setting or manually set the time to ensure accuracy.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your proof of purchase for any warranty claims.