Kakulkomen 5 Speed Gear Shift Knob for Peugeot Partner / Citroen Berlingo II

Contents

Instruction Manual

5-Speed Gear Shift Knob with Gaiter for Peugeot Partner & Citroen Berlingo II (2008-2018)

Brand: Kakulkomen

1. Product Overview

This manual provides instructions for the installation, operation, and maintenance of your new 5-speed manual gear shift knob and gaiter. This product is designed as a direct replacement for specific Peugeot Partner and Citroen Berlingo II models.

Compatibility:

  • Citroen Berlingo II: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
  • Peugeot Partner: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Important: Please compare this product with your original gear shift knob and gaiter before purchasing and installation to ensure proper fitment.

Three different styles of 5-speed gear shift knobs with gaiters for Peugeot Partner and Citroen Berlingo II.
Various styles of the 5-speed gear shift knob and gaiter.

2. Setup and Installation

Professional installation is highly recommended for this product.

This gear shift knob and gaiter assembly is designed for direct replacement. While specific instructions may vary slightly depending on your vehicle's exact configuration, the general steps involve:

  1. Preparation: Ensure the vehicle is parked on a level surface with the parking brake engaged.
  2. Removal of Old Unit: Carefully detach the existing gear shift knob and gaiter. This typically involves twisting the knob counter-clockwise to loosen it, and then unclipping the gaiter base from the console. Note how the original unit is attached for reference.
  3. Inspection: Inspect the shift lever and surrounding area for any damage or debris.
  4. Installation of New Unit:
    • Slide the new gaiter over the shift lever.
    • Thread the new gear shift knob onto the shift lever, turning clockwise until it is securely tightened and oriented correctly.
    • Carefully press the base of the gaiter into the console opening until it clips securely into place.
  5. Final Check: Test the gear shift through all positions (with the engine off) to ensure smooth movement and proper engagement.
Underside view of the gaiter base showing an 85mm measurement and mounting clips.
Gaiter base dimensions (approx. 85mm diameter) and mounting clips.
Image showing three different gear shift knob styles installed in a vehicle interior.
Example of installed gear shift knobs in a vehicle.

3. Operating Instructions

This product is a replacement gear shift knob for a manual 5-speed transmission. Operate your vehicle's manual transmission as you normally would, using the new gear shift knob to select gears (1st, 2nd, 3rd, 4th, 5th, and Reverse).

Ensure the knob is securely fastened before driving. If the knob feels loose, re-tighten it to prevent it from coming off during operation.

4. Maintenance

To ensure the longevity and appearance of your gear shift knob and gaiter:

  • Cleaning: Wipe the ABS plastic and leather boot with a soft, damp cloth. For the leather, use a mild leather cleaner if necessary. Avoid harsh chemicals or abrasive materials that could damage the finish.
  • Protection: Keep the gear shift area free from excessive dirt and spills.
  • Inspection: Periodically check that the gear shift knob remains securely attached to the shift lever and that the gaiter is properly clipped into the console.

5. Troubleshooting

If you encounter any issues with your gear shift knob, consider the following:

  • Loose Knob: If the knob feels loose, ensure it is fully threaded and tightened onto the shift lever.
  • Gaiter Not Seating Properly: Ensure all clips on the gaiter base are aligned with the console opening and pressed firmly into place.
  • Fitment Concerns: If the product does not fit your vehicle, double-check the compatibility information provided in Section 1. Due to manual measurement, slight deviations in size may occur. If you are unsure about compatibility, it is recommended to contact the seller with a picture of your original item for confirmation.
  • Shifting Difficulty: This product is a cosmetic replacement. If you experience difficulty shifting gears after installation, it is unlikely to be caused by the knob itself. Consult a professional mechanic to diagnose any underlying transmission issues.

6. Specifications

FeatureDetail
Product NameGear Shift Knob with Gaiter
Condition100% New
SpeedManual 5 Speed
MaterialHigh quality ABS + Leather Boot
Item Weight0.25 kg
Special FeaturesDirect Replacement for Gear Shift Knob Boot
External Testing CertificationISO9001
OriginMainland China
Gaiter Base DiameterApprox. 85mm
Knob Shaft Diameter (Approx.)15mm (Style B), 18mm (Style C), 17mm (Style E), 17.6mm (Style D)
Style B gear shift knob with gaiter, showing approximate 15mm shaft diameter.
Style B: Approx. 15mm shaft diameter.
Style C gear shift knob with gaiter, showing approximate 18mm shaft diameter.
Style C: Approx. 18mm shaft diameter.
Style E gear shift knob with gaiter, showing approximate 17mm shaft diameter.
Style E: Approx. 17mm shaft diameter.
Style D gear shift knob with gaiter, showing approximate 17.6mm shaft diameter.
Style D: Approx. 17.6mm shaft diameter.

7. User Tips

No specific user tips were available from the provided data. However, general advice for car accessories includes:

  • Always ensure replacement parts are securely installed before driving.
  • Regularly check the fitment of aftermarket parts to ensure they remain tight and functional.
  • If you are unsure about any aspect of installation, consult a professional.

8. Warranty and Support

This product is an aftermarket replacement item. For any support or warranty inquiries, please contact the seller directly. The seller offers:

  • Free returns within 90 days.
  • Refunds for delayed delivery, lost packages, or damaged items.

If you have any doubts about the product's suitability for your vehicle, please contact the seller for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.