1. Introduction
Thank you for choosing the BSEED Wifi Electric Thermostat. This device is designed to provide intelligent temperature control for electric floor heating systems, offering convenience and energy efficiency through its touch-sensitive LED screen and smart home integration capabilities. This manual will guide you through the installation, setup, and operation of your new thermostat.
2. Specifications
| Feature | Specification |
|---|---|
| Color Options | White, Black |
| Material | Glass Panel & Iron Plate & Plastic Switch Module |
| Power Supply | 95~240VAC, 50~60HZ |
| Light Power Load | 1000W/Gang |
| Current Load | 16A (Socket), 5A (Thermostat) |
| Support APP | Smart Life / Tuya |
| Support Smart Device | Google Home / Amazon Alexa / IFTTT |
| Voice Control | Alexa / Google Home / Smart Things |
| Type | Electric Floor Heating |
| Working Temperature | 0-45℃ |
| Buttons | Capacitive Touch Buttons |
| Screen | Negative LCD screen |
| Remote Distance | WIFI unlimited |
| Backlight | ON-light Blue, OFF-Weak Blue |
| Installation Box | European 503 Box |
| Wire Requirement | Neutral Wire Required |
| Feature | Sensor Wire included |
| Warranty | 1 Year |
| Certifications | CCC, CE, FCC, ROHS |
| Size | 86/157*86*37mm |
3. Safety Information
WARNING: Always cut off the main power supply during installation or maintenance to prevent electric shock. Installation should be performed by a qualified electrician in accordance with local electrical codes.
4. Installation
This thermostat is designed for installation in a European 503 Box. A neutral wire is required for proper operation. Please consult the wiring diagrams below and ensure all connections are secure and correct.
4.1 Wiring Diagrams
The thermostat supports various heating systems. Identify your system type and follow the corresponding wiring diagram carefully.
Wiring for Electric Floor Heating:
- Connect the Live wire to terminal L.
- Connect the Neutral wire to terminal N.
- Connect the Electric Sensor Wire to terminals RT and RT.
- Connect the LOAD (heating element) to terminals N1 and L1.
Wiring for Water Heating (Normal Open/Normal Close) or Water/Gas Boiler:
Refer to the detailed diagram for specific connections for NTC, Live, Neutral, and Actuator/Dry Contact based on your system type (Normal Open or Normal Close for water heating, or Dry Contact for boiler).
5. Initial Setup and App Configuration
After successful installation and power-up, you can configure your thermostat using the Smart Life or Tuya app.
5.1 Network Configuration (App Control)
- Ensure the thermostat is powered off.
- Press and hold the "V" key on the thermostat for 5 seconds to enter the network configuration mode. The Wi-Fi indicator on the screen should start blinking.
- Open the Smart Life or Tuya app on your smartphone.
- Follow the in-app instructions to add a new device and connect it to your home Wi-Fi network.
6. Operating Instructions
6.1 Manual Temperature Control
Use the touch buttons on the LED screen to manually adjust the desired temperature. The screen will display the current and set temperatures.
6.2 Weekly Programming
Set daily or weekly schedules through the app to automate your heating based on your routine. This feature helps optimize energy consumption and comfort.
6.3 Child Lock Function
Activate the child lock feature via the app to prevent accidental changes to settings by children. This locks the touchpad on the thermostat.
6.4 Voice Control
Integrate your thermostat with voice assistants like Google Home, Amazon Alexa, or Smart Things for convenient voice-activated temperature adjustments.
7. Maintenance
- Cleaning: Wipe the thermostat's glass panel with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the surface.
- Firmware Updates: Periodically check the Smart Life or Tuya app for available firmware updates to ensure optimal performance and access to new features.
- Power Cycle: If the device becomes unresponsive, try turning off the main power supply for a few minutes and then restoring it.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Thermostat not powering on | No power supply; incorrect wiring | Check main power switch; verify wiring connections according to diagrams. |
| Cannot connect to Wi-Fi | Incorrect Wi-Fi password; router too far; thermostat not in pairing mode | Ensure correct password; move router closer or use Wi-Fi extender; put thermostat in network configuration mode (hold 'V' key for 5s). |
| Temperature reading is inaccurate | Sensor issue; thermostat placement | Ensure sensor wire is properly connected; avoid placing thermostat near heat sources or drafts. |
| Heating not turning on/off | Wiring issue; thermostat settings; child lock active | Check load wiring; review programmed schedules and manual settings; disable child lock if active. |
| Voice control not working | Incorrect smart assistant setup; app not linked | Ensure your smart assistant (Alexa/Google Home) is correctly linked to your Smart Life/Tuya account. Check voice commands. |
9. User Tips
- Optimal Scheduling: Utilize the weekly programming feature to pre-heat your floors before you wake up or arrive home, and lower the temperature when you're away or asleep for maximum comfort and energy savings.
- App Integration: For the best experience, fully integrate your thermostat with your preferred smart home ecosystem (Google Home, Alexa) to leverage voice control and advanced automation routines.
- Sensor Placement: Ensure the floor sensor is correctly installed in the floor for accurate temperature readings and efficient heating control.
10. Warranty and Support
This product comes with a 1-Year Warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or any questions not covered in this manual, please contact the seller or manufacturer directly through your purchase platform. Provide your order number and a detailed description of the issue for faster assistance.