Introduction
This manual provides detailed instructions for the Retrosun Infrared (IR) Remote Control, designed for seamless operation with various projectors, including Toumei, Cocar T-series (T5, T6, V5, V6, V7), and KECAG W10 5G DLP portable 1080P WiFi movie projectors. Please read this manual carefully before using the remote control to ensure proper functionality and longevity.
Product Overview
The Retrosun remote control is an infrared device made from durable ABS plastic, offering a responsive and sensitive key experience for controlling your compatible projector. It features a long-distance infrared signal for reliable operation.

Figure 1: Retrosun Remote Control - Front and Back View with Button Labels

Figure 2: Remote Control Compatibility and Ease of Use
Specifications
| Feature | Description |
|---|---|
| Brand Name | retrosun |
| Model Number Compatibility | T5, T6, V5, V6, V7 (Toumei, Cocar T-series, KECAG W10) |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 1 |
| Use | Projectors |
| Material | ABS, Plastic |
| Certification | CE |

Figure 3: Detailed Product Parameters
Setup
- Battery Installation: Open the battery compartment cover on the back of the remote control. Insert two AAA batteries (not included), ensuring the correct polarity (+/-) as indicated inside the compartment. Close the cover securely.
- Initial Connection: The Retrosun remote control is designed for direct use with compatible projectors (Toumei, Cocar T-series, KECAG W10) without requiring any complex setup or pairing. Simply point the remote towards your projector.

Figure 4: Compatible Projector Models
Operating Instructions
The remote control features a user-friendly layout for easy navigation and control of your projector. Ensure there is a clear line of sight between the remote control and the projector's IR receiver for optimal performance.

Figure 5: Remote Control Design Variations (Replace vs. Original)
- Power Button (
): Press to turn the projector ON or OFF. - Directional Pad (Up, Down, Left, Right): Use these buttons to navigate through menus and selections on your projector screen.
- OK Button: Confirms selections or enters sub-menus.
- Volume/Navigation Buttons (
): Adjusts volume or navigates through content depending on the projector's current mode. - Return/Back Button (
): Returns to the previous screen or menu. - Home Button (
): Takes you to the projector's main home screen. - Menu/Options Button (
): Accesses additional settings or options.
The remote control provides a strong and sensitive signal for effective long-distance infrared control.

Figure 6: Signal Strength and Key Sensitivity
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and damage.
Troubleshooting
- Remote not responding:
- Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
- Ensure there is a clear line of sight between the remote control and the projector's IR receiver. Obstructions can block the signal.
- Make sure you are within the effective operating range of the remote control.
- Specific buttons not working:
- Clean the remote control, especially around the buttons, to remove any dirt or debris that might be obstructing them.
- If only certain functions are not working, verify that your projector model is fully compatible with all features of this remote.
User Tips
- This remote control offers easy and direct control of compatible projectors without complex setup.
- Its strong infrared signal ensures reliable operation even from a distance.
Warranty and Support
This product comes with a 12-MONTH Manufacturer's Limited Warranty for defective items. This warranty does not cover items damaged or misused after receipt. In case of a defect, you must report it within the warranty period and provide your order number. A replacement or refund will be issued if the defect is confirmed.