1. Introduction
The G.T. POWER High Power Headlight System is designed to provide super bright illumination for various RC models, including cars, crawlers, airplanes, and boats. This system features two high-power, super bright LEDs with reflectors and aluminum heat sinks, ensuring efficient and reliable performance. It is powered directly from a 2S LiPo battery via a JST-XH balance connector and can be conveniently controlled (turned on/off) using a spare channel on your RC receiver or transmitter.
2. Package Contents
Please inspect the package contents to ensure all items are present and undamaged:
- 1 x High Power Headlight System Set (includes 2 LED units, control module, wiring)
- 1 x Accessory package
- 1 x Instruction manual
3. Setup and Installation
Follow these steps to properly install your G.T. POWER High Power Headlight System:
- Mounting the LED Units: Securely attach the two LED light units to your RC model in the desired headlight positions. The units are designed for easy installation.
- Power Connection: Connect the JST-XH balance connector from the headlight system's control module to the balance port of a 2S LiPo battery. Ensure the battery voltage is within the specified range of 6.5V-8.4V DC.
- Receiver Connection: Connect the control wire from the headlight system's control module to a spare channel on your RC receiver. The control voltage input from the receiver should not exceed 5.0V DC. This connection allows you to switch the lights on and off remotely.
- Cable Management: Route all wires neatly and secure them to prevent interference with moving parts or damage during operation.
4. Operating Instructions
Once the headlight system is correctly installed and connected:
- Power on your RC model and transmitter.
- Use the assigned spare channel on your transmitter to toggle the headlights on or off.
- The LEDs will provide super bright illumination for your RC model.
5. Maintenance
To ensure the longevity and optimal performance of your headlight system:
- Keep the LED units and reflectors clean from dirt and debris. Use a soft, dry cloth for cleaning.
- Periodically check all wiring connections for looseness or damage.
- Ensure the aluminum heat sinks on the LED units are free from obstructions to allow for proper heat dissipation.
- Store the system in a dry, cool place when not in use.
6. Troubleshooting
If you encounter issues with your headlight system, consider the following:
- Lights not turning on:
- Check if the 2S LiPo battery is charged and properly connected to the JST-XH balance connector.
- Verify that the control wire is securely connected to a functional spare channel on your receiver.
- Ensure the transmitter switch for the assigned channel is in the 'on' position.
- Inspect all wires for any visible damage or breaks.
- Lights flickering or dim:
- Check the battery voltage; a low battery can cause dimming or flickering.
- Ensure all connections are firm and free from corrosion.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | G.T. POWER |
| Model Number | LED |
| Item Name | High Power Headlight System |
| Color | Multicolor |
| Receiver Input Voltage | 5 V DC Max |
| JST-XH Balance Connector Input Voltage Range | 6.5V-8.4V DC (for 2S LiPo battery) |
| LED Housing Diameter | 22mm |
| LED Housing Depth | 21mm |
| JST-XH (2S) Wire Length | 180mm |
| Control / Receiver Wire Length | 300mm |
| LED Control Wire Length | 200mm |
| Weight | 25g |
| Material | Plastic (PE) |
| Power Consumption | 0.5A |
| Recommended Age | 14+ years |
| Certification | CE |
| Use | Vehicles & Remote Control Toys |
8. User Tips
- Always ensure your LiPo battery is adequately charged before operating your RC model with the headlights to maintain consistent brightness.
- Consider the aesthetic placement of the LED units on your model for optimal light distribution and visual appeal.
- If using on a boat, ensure all connections are waterproofed if exposed to moisture.
9. Safety and Compliance Information
WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Always operate RC models responsibly and in accordance with local regulations. Keep small parts away from children.
10. Warranty and Support
For warranty information, technical support, or any inquiries regarding this product, please contact the seller or manufacturer directly. Retain your proof of purchase for any warranty claims.
