Introduction
The Gomexus LX50 Slow Jigging Fishing Reel is engineered for high-performance sea fishing, particularly effective for slow jigging techniques and targeting species like bass. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new fishing reel.
Specifications
The LX50 reel boasts robust construction and precise engineering for optimal fishing performance.
| Feature | Specification (LX50) |
|---|---|
| Model Number | LX50 |
| Gear Ratio | 7.1:1 |
| Bearings | 9+2BB (Japanese Imported NMB Marine Bearings) |
| Weight | 330g / 11.64oz / 12oz |
| Max Strike / Max Drag | 30KG / 60lbs |
| Line Capacity (Braided) | 300yds/30lbs (Standard) |
| Line Retrieve | 43 inch / 110mm |
| Handle Length | 3.62 inch / 92mm |
| Material | Cold forged light aero aluminum, Metal, Stainless Steel Gears |
| Drag System | HT-100 carbon fiber drags, Lever drag system |
| Hand Option | Left Handed |
| Fishing Method | Spinning, Trolling Reel |
| Position | Ocean Boat Fishing, Ocean Rock Fishing |
For detailed line capacity recommendations based on fish species, refer to the table below:
Dimensions of the LX50 reel are illustrated below:
Setup
- Attaching the Reel to a Rod: The LX50 reel is designed to be securely mounted on slow pitch jigging rods that feature a durable reel seat. Align the reel foot with the reel seat on your fishing rod and tighten the locking mechanism until the reel is firmly in place. No additional clamp is typically required.
- Spooling the Line:
- Ensure the line is spooled evenly onto the narrow spool to prevent tangles and optimize casting performance.
- Use braided line as recommended for slow jigging and saltwater applications. Refer to the specifications table for recommended line capacities.
- Drag Adjustment: Familiarize yourself with the lever drag system. The adjustable strike stop button allows for precise drag settings. Start with a lighter drag setting and gradually increase it as needed during fishing.
Operating the Reel
The LX50 reel is optimized for slow pitch jigging and general sea fishing. Its high-speed gear ratio (7.1:1) allows for quick line retrieval, while the narrow spool design aids in line management and reduces line twist.
- Casting: With the thumb bar release engaged, cast your lure or bait. The narrow spool helps in achieving smooth casts.
- Retrieving: Engage the reel and begin retrieving. The 7.1:1 high-speed gear ratio is ideal for quickly bringing in line, especially when working jigs or fighting fast-moving fish.
- Fighting Fish: Utilize the HT-100 carbon fiber lever drag system to manage the fight. Adjust the drag as necessary to apply pressure to the fish while preventing line breakage. The large, comfortable soft-touch power knob provides a secure grip during intense battles.
- Slow Pitch Jigging: For slow pitch jigging, the lightweight design of the LX50 (approx. 11oz) is advantageous. A lighter reel allows for better jig action in deeper water, enhancing your ability to entice strikes.
Maintenance
Proper maintenance will extend the life and performance of your Gomexus LX50 reel.
- Rinse After Use: After each use, especially in saltwater, lightly rinse the reel with fresh water to remove salt and debris. Avoid using high-pressure water, which can force water into the internal mechanisms.
- Drying: Allow the reel to air dry completely in a shaded, well-ventilated area. Do not expose it to direct sunlight for prolonged periods.
- Lubrication: Periodically apply a small amount of high-quality reel oil to moving parts such as the handle knob, shaft, and any visible bearings. Use reel grease on gears if you perform a deeper disassembly (recommended only for experienced users or professional service).
- Drag System Care: The HT-100 carbon fiber drag system is designed for durability. Keep the drag washers clean and free of sand or grit. Do not overtighten the drag when storing the reel, as this can compress the washers and reduce their effectiveness over time.
- Storage: Store your reel in a dry, cool place, away from direct sunlight and extreme temperatures. Consider using a reel cover to protect it from dust and scratches.
Troubleshooting
Most common issues with fishing reels can be resolved with simple checks.
- Stiff or Grinding Handle:
- Check for dirt or sand in the handle mechanism. Clean and lubricate as described in the Maintenance section.
- Ensure the handle is securely tightened.
- Drag Slipping or Uneven:
- Inspect drag washers for wear or contamination (e.g., oil, grease). Clean or replace if necessary.
- Ensure the drag is properly adjusted and not overtightened.
- Line Twist:
- Ensure the line is spooled correctly.
- Avoid repeatedly reeling against a locked drag.
- Periodically let out all your line while drifting to allow it to untwist naturally.
- Corrosion:
- While the reel is saltwater resistant, proper rinsing and drying after each use are crucial to prevent corrosion.
- If minor corrosion appears, gently clean with a soft brush and appropriate corrosion inhibitor.
If you encounter persistent issues, please contact Gomexus customer support for assistance.
User Tips
- Target Species: The LX50 reel is particularly well-suited for Bass and Slow Jigging applications.
- Jigging Performance: For slow pitch jigging, remember that a lighter reel, like the LX50, can enhance the movement of your jig in deeper water, potentially increasing your catch rate.
- Saltwater Durability: The reel's saltwater-resistant features, including perfectly anodized aluminum and stainless steel gears, make it a reliable choice for marine environments. However, consistent post-fishing care is still recommended.
Warranty and Support
Gomexus provides a 12-month warranty for the LX50 Slow Jigging Reel.
For any questions, concerns, or warranty claims, please contact Gomexus customer support. You can expect a response and resolution within 24 hours.
