Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your COOLING REVOLUTION PLD10020S12H graphics card cooling fan. This fan is designed to replace original cooling fans on compatible Gigabyte GeForce RTX 4090 and RTX 4080 Gaming OC series graphics cards, ensuring optimal thermal performance.
Specifications
| Feature | Description |
|---|---|
| Fan Model | PLD10020S12H |
| Fan Size | 105mm x 105mm x 17mm |
| Power | DC12V |
| Type | Graphics Card Cooling Fan |
| Compatibility | Gigabyte GeForce RTX 4090 Gaming OC, Gigabyte GeForce RTX 4080 Gaming OC |
| Condition | Brand New |
Package Contents
Your package should contain the following items:
- Three (3) 105mm PLD10020S12H Graphics Card Cooling Fans with attached cables.
Installation Guide
Important Safety Notice: Before attempting any installation, ensure your computer is completely powered off and unplugged from the wall outlet. Disconnect all cables. Static electricity can damage electronic components. Consider wearing an anti-static wrist strap.
- Prepare Your Graphics Card: Carefully remove your graphics card from your computer. Place it on a clean, static-free surface.
- Remove Old Fans: Locate the screws holding the existing cooling fans to the heatsink shroud. Carefully unscrew them and disconnect the fan cables from the graphics card's fan header. Note the orientation and position of each fan (left, middle, right) for correct replacement.
- Clean the Heatsink (Optional but Recommended): If the heatsink fins are dusty, gently clean them with compressed air or a soft brush to ensure optimal airflow for the new fans.
- Install New Fans: Position the new COOLING REVOLUTION fans onto the heatsink shroud, matching their original positions. The fans are typically labeled or designed to fit specific spots.
- Secure Fans: Fasten the new fans using the appropriate screws. Do not overtighten.
- Connect Cables: Plug the fan cables into the corresponding fan headers on the graphics card. Ensure a secure connection.
- Reinstall Graphics Card: Carefully reinstall the graphics card into its PCIe slot in your computer. Secure it with the retaining clip or screw.
- Reconnect and Power On: Reconnect all power cables and peripherals to your computer. Power on your system and verify that the new fans are spinning correctly.
For a visual overview of the product, please refer to the video below:
Operating Instructions
Once installed, the graphics card cooling fans operate automatically, controlled by your graphics card's firmware and drivers. They will adjust their speed based on the GPU temperature to maintain optimal cooling performance. No manual intervention is typically required for their basic operation.
Maintenance
- Regular Cleaning: Periodically inspect the fans and heatsink for dust accumulation. Use compressed air to gently blow dust out of the fan blades and heatsink fins. Hold the fan blades gently to prevent them from spinning rapidly during cleaning, which can damage the bearings.
- Visual Inspection: Check for any signs of wear, such as loose cables or damaged fan blades. Address any issues promptly.
Troubleshooting
- Fans Not Spinning:
- Ensure all fan cables are securely connected to the graphics card's fan headers.
- Verify that the graphics card is properly seated in its PCIe slot and receiving power.
- Check your graphics card drivers and software (e.g., GPU monitoring tools) to ensure fan control settings are not preventing them from spinning.
- Unusual Noise:
- Inspect the fan blades for any obstructions (e.g., loose wires, dust buildup).
- Ensure the fans are securely mounted and not vibrating against the heatsink shroud.
- If the noise persists and is excessive, it may indicate a faulty fan bearing.
- Poor Cooling Performance:
- Ensure the heatsink is clean and free of dust.
- Verify that the fans are spinning at appropriate speeds under load.
- Consider reapplying thermal paste to the GPU if temperatures remain high after fan replacement.
User Tips
- Always double-check fan compatibility with your specific graphics card model before purchase.
- When replacing fans, take photos of the original setup to aid in reassembly.
- Consider using a small amount of threadlocker on fan screws to prevent them from loosening over time due to vibrations.
- Monitor your GPU temperatures after installation to ensure the new fans are performing as expected.
Warranty and Support
This product comes with a 6-month warranty period from the date of purchase. Please retain your proof of purchase for warranty claims. For technical support or warranty inquiries, please contact the seller or manufacturer directly.
