1. Introduction
This manual provides detailed instructions for the safe and effective operation of your Microzone MC8B 2.4G 8CH Remote Control Transmitter and MC9002 CH Receiver Radio System. Designed for a variety of remote-controlled models including fixed-wing aircraft, helicopters, multi-axis aircraft (UAVs), cars, and boats, this system offers reliable 2.4GHz FHSS technology for precise control. Please read this manual thoroughly before use to ensure proper setup and to maximize your enjoyment of the product.
2. Product Overview
The Microzone MC8B is an 8-channel full-function remote controller featuring a new FM operating system, flexible customization options, and a simple, fast interface. It includes an LCD display for Chinese and English menus and provides low voltage alarm functionality via an LED indicator and buzzer. The system is designed for versatility and ease of use across various RC models.
The accompanying MC9002 receiver features a wide voltage design (DC 2V-9V) and supports 8 PWM signals and 1 SBUS signal, making it compatible with multi-axial UAVs, F3/Pix4/QQ flight control systems supporting S.BUS, fixed-wing aircraft, multiaxial aircraft, cars, and boats.

Figure 2.1: Microzone MC8B Transmitter and MC9002 Receiver.

Figure 2.2: Front view of the MC8B Transmitter, showing the LCD display and controls.

Figure 2.3: The MC8B Transmitter is compatible with fixed-wing aircraft, helicopters, drones, cars, and boats.
3. Specifications
3.1. Transmitter (MC8B)
| Feature | Specification |
|---|---|
| Channels | 8 |
| RF Range | 2405MHZ - 2479MHZ |
| RF Power | Less than 100MW |
| Working Current | Less than 150MA |
| Working Voltage | 4.5V - 8.5V |
| Modulation Mode | FSK |
| Sensitivity | 1024 |
| Signal Output | 8 PWM signals and 1 SBUS signal |
| Power Supply | 6V (4 x 1.5AA batteries) |
| Dimensions (L*W*H) | 215MM * 105MM * 220MM |
| Weight (Gross) | 580g |
| Certificates | FCC, CE_RED |
3.2. Receiver (MC9002)
| Feature | Specification |
|---|---|
| Product Name | MC9002 Receiver PWM/SBUS |
| Antenna Length | 150mm (Dual antenna design) |
| Output Channel | 8 PWM signals and 1 SBUS signal |
| Reception Frequency | 2.4GHz |
| Receiving Distance | Air distance > 1000M |
| Voltage Range | DC4V-9V |
| Dimensions (L*W*H) | 47mm * 25mm * 14mm |
| Weight | 10g |

Figure 3.1: Detailed specifications for the MC9002 Receiver.
3.3. Receiver (MC8RE)
| Feature | Specification |
|---|---|
| Product Name | MC8RE Receiver |
| Antenna Length | 110mm |
| Output Channel | 8 PWM signal channels and 1 SBUS signal channel |
| Reception Frequency | 2401MHZ - 2479MHZ |
| Dimensions (L*W*H) | 42mm * 28mm * 12mm |
| Weight | 12g |

Figure 3.2: Detailed specifications for the MC8RE Receiver.

Figure 3.3: MC8RE 9CH Receiver wiring diagram showing Positive Pole, Negative Pole, Signal, S.BUS Signal (for Multi-axial UAV, F3/Pix4/QQ flight control), PWM Signal (for Fixed wing aircraft, Multiaxial aircraft, Car, Boat), and Contact Pair Frequency.
4. Setup
4.1. Transmitter Battery Installation
- Locate the battery compartment on the back of the MC8B Transmitter.
- Open the battery compartment cover.
- Insert four (4) 1.5V AA batteries, ensuring correct polarity.
- Close the battery compartment cover securely.
4.2. Receiver Connection and Binding
Connect the receiver to your model's flight controller or servos according to the specific requirements of your model. Refer to Figure 3.3 for the MC8RE receiver's pinout diagram, which shows connections for Positive Pole, Negative Pole, Signal, S.BUS, and PWM signals.
To bind the receiver with the transmitter:
- Ensure both the transmitter and receiver are powered off.
- Connect the binding plug (if provided) to the 'BIND' port on the receiver.
- Power on the receiver. The receiver's LED should start flashing, indicating it's in binding mode.
- While holding down the 'BIND' button on the transmitter (if available, otherwise follow specific transmitter binding sequence), power on the transmitter.
- The LED on the receiver should turn solid, indicating a successful bind.
- Power off both the transmitter and receiver, then remove the binding plug from the receiver.
- Power on the transmitter first, then the receiver, to confirm the connection.
Note: For detailed frequency matching procedures, refer to the 'Contact frequency matching' information provided with your specific receiver model.
5. Operating Instructions
5.1. Basic Controls
- Joysticks: Control primary flight/movement functions (e.g., throttle, aileron, elevator, rudder).
- Switches (SW1, SW2, SW3, SW4): Used for various auxiliary functions such as flight modes, gear, or flaps.
- Rotary Switches (VR1, VR2): Provide fine-tuning or proportional control for specific functions.

Figure 5.1: Close-up of a joystick for precise control.

Figure 5.2: Rotary switches VR1 and VR2 for auxiliary adjustments.
5.2. LCD Menu Navigation
The LCD screen displays Chinese and English menus. Use the 'FUNC/MODE' and 'SELECT' buttons to navigate and adjust settings. The classical neutral knob is fine-tuned to facilitate quick switching of the platform and attitude.
5.3. Advanced Functions
- Throttle Swap: Internal software supports M1 and M2 throttle swap (double return).
- Flight Time Setting: You can set the flight time through the internal software.
- Channel Replacement & Detection: Internal software supports CH5-CH8 arbitrary replacement of settings and CH1-CH8 signal detection.
- Helicopter Functions: Supports 90-degree, 120-degree CCPM (Cyclic/Collective Pitch Mixing) and gyro sensitivity adjustment.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the transmitter and receiver. Avoid using solvents or abrasive cleaners.
- Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods to prevent leakage.
- Battery Care: Always use fresh, high-quality AA batteries for the transmitter. Do not mix old and new batteries or different types of batteries.
- Antenna Care: Ensure receiver antennas are not bent or damaged. Proper antenna placement is crucial for optimal signal reception.
7. Troubleshooting
- No Power: Check transmitter batteries for correct installation and charge level. Ensure receiver is properly connected to power source.
- Low Voltage Alarm: If the LED indicator and buzzer alarm simultaneously, replace the transmitter batteries immediately.
- No Signal/Loss of Control:
- Ensure the transmitter and receiver are properly bound. Repeat the binding process if necessary.
- Check the distance between the transmitter and receiver. The maximum horizontal remote control distance is approximately 800M.
- Verify that receiver antennas are correctly positioned and undamaged.
- Check for potential interference from other 2.4GHz devices.
- Incorrect Control Response: Calibrate your model's flight controller or ESCs according to their respective manuals. Verify transmitter settings for channel assignments and mixing.
8. User Tips
- Check Package Contents: Upon receiving your product, carefully check all package contents against the product listing. If any items, such as the user manual or neck strap, are missing, contact the seller or manufacturer for assistance.
- Material Quality: The MC8B transmitter features a durable metal construction, contributing to its robust feel and longevity.
- Upgrade Potential: The Microzone MC8B system is designed with upgradeability in mind, allowing for future enhancements to parts and accessories.
- Versatile Functions: Remember that the system provides comprehensive remote control and radio system functions, making it suitable for a wide range of RC applications.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the manufacturer or your authorized dealer. Keep your proof of purchase for any warranty claims.