4DRC 4D-V8

Contents

4DRC V8 Mini Drone Quadcopter Operating Instructions

Model: 4D-V8

Suitable for ages over 14

1. Introduction and Safety Warnings

This manual provides detailed instructions for the safe and effective operation of your 4DRC V8 Mini Drone. Please read it thoroughly before use and retain it for future reference.

Safety Warnings

  1. The packaging and instructions contain important information and should be kept.
  2. With this aircraft, you are responsible for ensuring that no harm will be caused to the personal and property of others.
  3. Commissioning and installation of the aircraft must be strictly in accordance with the operating instructions. Pay attention to maintaining a distance of 2 to 3 meters between the aircraft and users/other people to prevent injury during flight and landing.
  4. Our company and distributors are not responsible for any loss, damage, or injury caused by improper use or operation.
  5. Children must be guided by adults when operating the aircraft. This product is prohibited to be operated by children under 14 years old.
  6. Please follow the instructions for correct installation and use. Some parts may require adult assembly.
  7. The product contains small parts; keep it out of reach of children to prevent accidental ingestion or suffocation.
  8. It is strictly forbidden to play on roads or in areas with accumulated water to avoid accidents.
  9. Please dispose of packing materials promptly to avoid harm to children.
  10. Do not disassemble or modify the aircraft. This may cause malfunction.
  11. The charging cable requires a 5V === 2A power supply, as indicated on the product label.
  12. Only use the charging cable configured by the factory.
  13. The charging cable is not a toy.
  14. When charging the rechargeable battery, it must be under adult supervision. Keep it away from flammable materials and do not leave the monitoring range.
  15. Do not short circuit or squeeze the battery to avoid explosion.
  16. Do not mix different types of lithium batteries.
  17. The aircraft uses a rechargeable lithium battery, which needs to be removed for charging.
  18. Do not short-circuit, decompose, or throw the battery into fire; do not place the battery in high-temperature areas (e.g., near electric heating devices).
  19. The aircraft should be used as far away as possible from other electrical equipment and magnetic objects to prevent mutual interference.
  20. Maintain a safe distance from the high-speed rotating propeller to avoid scalp or cut injuries.
  21. The motor is a hot part; do not touch it to avoid burns.
  22. LEDs emit laser radiation; do not direct the beam at others.
  23. Do not use the model near your ears! Misuse may cause hearing damage.
  24. Use only the data cable provided by our company for charging the battery to prevent damage.
  25. To comply with aeronautical radio station requirements, remote control models should not be operated within city areas as required by relevant state departments.
  26. Turn off the switch and unplug the battery when the aircraft battery is depleted. Allow 30 minutes of rest before charging to prevent battery damage.

Product Overview Video

Watch this video for a quick demonstration of the 4DRC V8 Mini Drone's features and flight capabilities.

2. Package Contents

Ensure all items listed below are present in your package:

  • Aircraft ×1
  • USB charging cable ×1
  • Fan blade ×4 (spare)
  • Lithium battery ×1
  • Fan blade replacement tool ×1
  • Screwdriver ×1
  • Instructions ×1
Contents of the 'No Camera 1 Battery' package, showing drone, remote, battery, USB cable, spare blades, protection covers, screwdriver, and manual.
Example package contents for 'No Camera 1 Battery' version.

3. Product Overview

Familiarize yourself with the different parts of your 4DRC V8 Mini Drone:

Diagram of the 4DRC V8 Mini Drone with labels for Power switch, Fan blade, Safety guard, Motor, Camera, Battery, Shell, and LED lights.
Main components of the 4DRC V8 Mini Drone.
  • Power Switch: Turns the drone on/off.
  • Fan Blade: Propellers for flight.
  • Safety Guard: Protects propellers from impact.
  • Motor: Drives the propellers.
  • Camera: For aerial photography and video (if applicable).
  • Battery: Powers the drone.
  • Shell: Main body of the drone.
  • LED Lights: Indicate status and aid visibility.

4. Fan Installation Steps

Follow these steps to correctly install or replace the fan blades:

  1. Use the provided tool to carefully remove the existing fan blade.
  2. Identify the correct replacement blade. Fan blades are marked with A1, A2, B1, and B2. Ensure A1=A2 and B1=B2.
  3. Install the new blade according to the diagram. Incorrect installation will prevent the aircraft from taking off.
Diagram showing how to replace fan blades, indicating A1/A2 and B1/B2 positions.
Correct fan blade installation diagram.

5. Lithium Battery Charging Instructions

Proper charging ensures optimal performance and battery longevity.

Aircraft Battery Charging

  1. First, buckle the battery lock of the aircraft and remove the battery.
  2. Insert the USB interface of the charging cable into a USB port (e.g., computer, desktop PC, mobile power, USB adapter, or USB power socket) with a 5V-2A output.
  3. Connect the other end of the USB charging cable to the battery socket.
  4. The red LED light on the charging cable will turn off during charging and will remain on when charging is complete.

Warning: Only use the aircraft charging cable provided by the factory. Using other charging cables may cause accidents or damage to the battery.

Diagram showing the modular battery and how to connect it to the USB charging cable.
Modular battery for fast and convenient installation and charging.

Remote Control Battery Installation

  1. Remove the battery cover on the back of the remote control.
  2. Insert 3 x AAA batteries (not included) according to the polarity instructions (+/-) in the battery compartment.
  3. Replace the battery cover.

Note: Ensure correct polarity. Do not mix old and new batteries or different types of batteries.

Diagram showing the remote control with its battery compartment open, indicating where to insert 3 AAA batteries.
Remote control battery installation.

6. Remote Control Overview

Understand the functions of each part of the remote control:

Diagram of the remote control with labels for all buttons and joysticks, including speed control, throttle lever, switch, fine-tuning buttons, 360 roll, steering rod, indicator light, remote control mode/induction mode, one-key take-off/landing, emergency stop/one-key calibration, headless mode/one-key return.
Remote control layout and functions.
  • Throttle/Left and Right Lever: Controls altitude and rotation.
  • Speed Control: Adjusts flight speed.
  • Advance Fine-tuning: Adjusts forward/backward drift.
  • Left/Right Fine-tuning: Adjusts left/right drift.
  • Reverse Fine-tuning: Adjusts backward drift.
  • 360° Roll Button: Initiates 360-degree flips.
  • Steering Rod: Controls forward, backward, left, and right movement.
  • Indicator Light: Shows remote control status.
  • Remote Control Mode/Induction Mode Switch: Toggles between control modes.
  • One-key Take-off/Landing: Initiates automatic take-off or landing.
  • Emergency Stop (short press)/One-key Calibration (long press): Stops motors or calibrates gyroscope.
  • Headless Mode (short press)/One-key Return (long press): Activates headless mode or returns the drone.

7. Environmental Requirements Before Flight

To ensure a safe and stable flight, observe the following environmental conditions:

  • Fly in an outdoor open environment without rain and snow.
  • Avoid flying in winds stronger than level 3.
  • Stay away from people, trees, wires, tall buildings, airports, and signal transmission towers.
Image showing a drone avoiding obstacles, illustrating the auto obstacle avoidance feature.
The drone features auto obstacle avoidance for safer flight.

8. Pre-Flight Preparation (Remote Control)

8.1 Power On and Frequency Matching

  1. Turn on the power of the aircraft and place it on a horizontal plane. The front blue and red lights on the body will flash, indicating it's in frequency matching state.
  2. Press and hold the power switch button of the remote control. The power indicator will turn on.
  3. Push the throttle lever (left joystick) all the way up, then all the way down.
  4. Code-matching will succeed when the aircraft lights change from flashing to solid on.

Warning: Ensure the aircraft and remote control have sufficient power before attempting to take off.

8.2 Horizontal Calibration

  1. Long press the calibration key on the remote controller.
  2. The LED lights on the aircraft will flash.
  3. When the LED lights become solid, calibration is complete. The remote controller will emit a "beep" sound.

Note: Calibration must be completed only when the aircraft is placed on a horizontal plane.

8.3 Start/Stop

  1. Push the left control lever on the remote control upward to start the aircraft. All indicator lights will be solid on.
  2. To stop, short press the stop key on the remote control.

Note: For uncontrolled states, this function is suitable. Under normal circumstances, it is recommended to use the one-key takeoff/landing key.

8.4 One-Key Take-off and Landing

  1. After unlocking, gently press the "One Key Takeoff/Landing" key on the remote control. The aircraft will automatically rise to about 1 meter and hover.
  2. Press the key again to initiate a slow, automatic landing.

9. Remote Control Operation

9.1 Basic Flight Controls

  • Ascend/Descend: Push the left joystick (throttle) up to ascend, down to descend.
  • Turn Left/Right: Push the left joystick (rudder) left to turn left, right to turn right.
  • Forward/Backward: Push the right joystick (rudder) up to move forward, down to move backward.
  • Left/Right Sideways Flight: Push the right joystick (rudder) left to fly left, right to fly right.

9.2 360° Roll

Ensure the aircraft is at least 1.5 meters above the ground for a safe roll. It's best to perform rolls during ascent.

  • 360° Roll Left: Short press the 360° roll button, then push the right joystick to the left.
  • 360° Roll Right: Short press the 360° roll button, then push the right joystick to the right.
  • Roll Forward 360°: Short press the 360° roll button, then push the right joystick upward.
  • 360° Roll Backward: Short press the 360° roll button, then push the right joystick downward.

9.3 Headless Mode

In headless mode, the drone's orientation is relative to the remote control, making it easier to fly without worrying about the drone's 'front'.

  1. The drone defaults to headless mode when first paired.
  2. To activate/deactivate, short press the "headless mode" function key on the remote control.

Special Prompt: Ensure the aircraft is aligned with a straight line and the gyroscope automatically detects it for accurate headless mode flight.

9.4 One-Key Return

This feature allows the drone to return to the remote control's position.

  1. During flight, long press the one-key home button on the remote control.
  2. The remote control will emit a "beep" sound, and the aircraft will enter one-key return mode.
  3. Any joystick operation will cancel the return function.

9.5 Speed Switching

The aircraft starts in low-speed mode. Gently press the speed switch button on the remote control:

  • One "beep" sound: Low-speed gear.
  • Two "beep" sounds: Medium-speed gear.
  • Three "beep" sounds: High-speed gear.

9.6 Fine-Tuning Function

Use the fine-tuning buttons to correct any drift during flight.

  • Forward/Backward Drift: Use the forward/backward fine-tuning keys.
  • Left/Right Rotation Drift: Use the left/right rotation fine-tuning keys.
  • Left/Right Sideways Drift: Use the left/right sideways fine-tuning keys.

10. APP Control and Features

10.1 APP Download and Installation

  1. Scan the QR code below with your mobile phone.
  2. Select the corresponding system (iOS or Android) to download and install the "4DRC FPV" APP.
QR code for downloading the 4DRC FPV app, with options for iOS App Store and Android Google Play.
Scan to download the 4DRC FPV APP.
  1. Turn on the aircraft. On your mobile device (phone or iPad), go to Settings, open Wi-Fi, and connect to the network named "4DRC********".
  2. Exit Settings and open the "4DRC FPV" APP. Click START to enter the control interface. (Try to avoid other signal sources when flying).

10.3 APP Control Interface Functions

The APP offers various control and feature options:

  • Media Library: Access photos and videos.
  • Photo/Video: Capture images and record videos.
  • Return: One-key return function.
  • Third Gear Acceleration: Adjust flight speed.
  • Fixed Height: Altitude hold mode.
  • Control Panel: Access main flight controls.
  • Image Flipping: Flip the camera view.
  • Gravity Induction: Control flight by tilting your phone.
  • Trajectory Flight: Draw a path on the screen for autonomous flight.
  • Gesture Control: Use hand gestures for photo/video functions.
  • Voice Control: Give flight instructions via voice.
  • VR 3D Experience: Use with VR glasses for immersive flight.
Image showing a smartphone displaying the 4DRC FPV app interface with options for gravity sensor and trajectory flight.
APP features including Gravity Sensor and Trajectory Flight.

10.4 Pre-Flight Preparation (APP)

  1. Turn on the aircraft and place it on a horizontal plane.
  2. Turn on Wi-Fi on your mobile device and connect to the drone's network.
  3. Open the 4DRC FPV APP. Click START, then OFF, then turn on the touch joystick.
  4. Click "More Functions" and turn on "aircraft constant light on" to confirm successful frequency matching.

10.5 Horizontal Calibration (APP)

  1. In the APP, click the "correction" icon.
  2. The LED lights on the aircraft will flash, then become solid, indicating calibration is complete.

Note: Calibration must be completed only when the aircraft is placed on a horizontal plane.

10.6 One-Key Take-off and Landing (APP)

  1. In the APP control interface, click the "one-key take-off" icon to automatically take off.
  2. During flight, click the "one-key landing" icon to automatically land.

10.7 APP Control Method

The APP control mirrors the remote control functions, allowing for precise flight adjustments and special maneuvers.

  • Ascend/Descend: Drag the left joystick up/down.
  • Turn Left/Right: Drag the left joystick left/right.
  • Forward/Backward: Drag the right joystick up/down.
  • Left/Right Sideways Flight: Drag the right joystick left/right.

10.8 Gesture Recognition

When facing the camera's front lens, click the gesture photo button on the APP, and use any of the following gestures to trigger the aircraft's photo or camera function.

Special Prompt: For best results, face the lens from about 2-3 meters away in a well-lit environment with a clear background.

11. Specifications

FeatureDetail
Product NameMultifunctional interactive aerial photography small plane
Model Number4D-V8
Brand Name4DRC
MaterialABS Plastic and Electronic Components
Color OptionsBlack/Orange, Blue/Orange
Product Size (Unfolded)13 x 11 x 4 cm
Drone Weight150g
Takeoff Weight150g
Motor Type716 Brushed Coreless Motor
Gyroscope6-axis
Control Channels4 channels
Remote ControlYes
Controller Battery3 x 1.5 AAA Battery (not included)
Controller ModeMODE1, MODE2
Charging Voltage3.7V
Charging Time40 minutes
Flight TimeApprox. 11-15 minutes (up to 20 minutes depending on conditions)
Remote Distance50-80m (up to 100 meters)
FPV Distance30-50m
FPV TypeWiFi
Video Capture Resolution1080p FHD, 4K UHD (5 million HD pixels options available)
Camera AngleFixed at 25°
Aerial PhotographyYes
Operator Skill LevelBeginner, Intermediate
Indoor/Outdoor UseIndoor-Outdoor
Camera Mount TypeFixed Camera Mount, Other
FeaturesApp-Controlled, FPV Capable, Wi-Fi, Altitude Hold, Headless Mode, One-Key Return, 360° Roll, Gesture Control, Voice Control, VR 3D Experience
Power SourceElectric
CertificationCE
Recommended Age14+ years
Package IncludesOriginal Box, Camera (optional), Batteries, Remote Controller, USB Cable, Operating Instructions
Product parameter table and drone dimensions, showing 13cm length, 11cm width, and 4cm height.
Detailed product parameters and dimensions.

12. User Tips

  • Spare Propellers: Propellers can be fragile. It is advisable to have spare propellers on hand for quick replacements.
  • Battery Care: Always ensure the battery is fully charged before flight and allowed to rest for 30 minutes after use before recharging.
  • Pre-Flight Checks: Always perform horizontal calibration before each flight for stable operation.
  • Flight Environment: Choose an open area free from obstacles and strong winds for the best flight experience.

13. Troubleshooting

Here are some common issues and their potential solutions:

ProblemPossible CauseSolution
Drone does not take offLow battery; Incorrect propeller installation; Not paired/calibratedCharge battery fully; Check propeller orientation (A1/A2, B1/B2); Perform frequency matching and horizontal calibration.
Unstable flight/DriftingNot calibrated; Damaged propellers; Wind interferencePerform horizontal calibration on a flat surface; Replace damaged propellers; Fly in calm conditions.
Remote control not respondingLow remote battery; Not paired; InterferenceReplace AAA batteries in remote; Re-perform frequency matching; Move away from other electronic devices.
APP not connecting to droneWiFi not enabled; Incorrect WiFi network; APP not openEnable WiFi on phone and connect to "4DRC********" network; Open the 4DRC FPV APP.
Poor camera quality/No imageLow light; Camera lens dirty; Connection issueEnsure adequate lighting; Clean camera lens; Reconnect APP to drone WiFi.
Drone crashes easilyLack of experience; Obstacles; High speedPractice in open areas; Use lower speed settings; Utilize obstacle avoidance features.

14. Warranty and Support

Your 4DRC V8 Mini Drone comes with a 15-day warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase.

For detailed instructions, troubleshooting, or further assistance, please refer to the comprehensive user manual available in PDF format: Download User Manual (PDF).

15. Compliance Statement

Disclaimer: This product is not suitable for children under 36 months due to small parts. Operation is prohibited for children under 14 years old without adult supervision.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.