1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Annke 8-channel 6MP NVR security system, featuring dual-light audio fixed bullet cameras with human and vehicle detection. Please read this manual thoroughly before using the product to ensure proper setup and functionality.
2. Safety Information
- Ensure all power connections are secure and meet the specified voltage requirements.
- Do not expose the NVR or cameras to extreme temperatures, humidity, or corrosive environments.
- Avoid placing the NVR in areas with poor ventilation.
- Handle the cameras and NVR with care to prevent physical damage.
- Consult a qualified professional for installation if you are unsure about any steps.
3. Package Contents
Verify that all items are present in your package:
- 4 x 6MP Dual-Light Audio Fixed Bullet Cameras
- 1 x 8-Channel Network Video Recorder (NVR)
- 2 x 100 ft (30 m) Ethernet Cables
- 2 x 60 ft (18 m) Ethernet Cables
- 4 x Mounting Screw Bags
- 1 x USB Mouse
- 1 x Power Adapter for NVR
- 1 x 1.8M HDMI Cable
- 1 x 1M Network Cable
- 1 x User's Manual (this document)

Image: Annke 8CH 6MP NVR system with 4 bullet cameras and a 2TB HDD, showcasing key features.
4. Product Overview
4.1. NVR Features
- 6MP high-definition real-time live viewing, recording, and playback.
- Up to 8 channel IP camera connectable with built-in PoE inputs.
- Advanced H.265+ compression for efficient storage.
- Smart playback for improved efficiency.
- Supports remote monitoring via iPhone, iPad, and Android mobile devices using Annke Vision.
- Reliable encryption with bank-level security, verification codes, private protocols, and activation passwords.

Image: NVR security features including encryption protocols.
4.2. Camera Features
- 3K IR Network Camera with 16:9 image scale (3072x1728 resolution).
- 2.8mm lens providing a wide 114° field of view.
- Efficient H.265+ compression technology.
- Motion Detection 2.0 with human and vehicle detection to reduce false alerts.
- Smart Dual-Light technology for advanced night vision modes (Color, IR, Human/Vehicle-Triggered Color).
- Clear day and night vision with 3D DNR (Digital Noise Reduction) and 120dB WDR (Wide Dynamic Range).
- Built-in microphone for real-time audio security.
- Supports on-board microSD card storage up to 256 GB (card not included).
- IP67 Dust and Waterproof Rating for indoor/outdoor use.
- Supports PoE (Power over Ethernet) and DC12V power options.

Image: Detailed view of the camera components and features.
5. Setup Guide
5.1. NVR Connection
- Connect the NVR to a monitor using the HDMI or VGA output.
- Connect the USB mouse to a USB port on the NVR.
- Connect the NVR to your network router using the provided Ethernet cable.
- Connect the NVR to power using the provided power adapter.

Image: NVR port overview for connection.
5.2. Camera Installation and Connection
The cameras support Power over Ethernet (PoE), allowing both power and data to be transmitted through a single Ethernet cable.
- Mount the cameras in desired locations using the mounting screw bags. The 3-axis mounting bracket allows for flexible positioning.
- Connect each camera to an available PoE port on the NVR using the provided Ethernet cables.
- Ensure the weatherproof lid is securely attached to the PoE connector for outdoor installations to maintain IP67 rating.

Image: PoE connection diagram for cameras.
5.3. Initial Configuration
Follow the on-screen prompts on the connected monitor to complete the initial setup, including setting up passwords and network settings. The NVR is compatible with both Annke and third-party cameras.

Image: NVR compatibility with various camera types.
6. Operating Instructions
6.1. Live Viewing
Once configured, you can view live feeds from all connected cameras on your monitor or via the Annke Vision app on your mobile device.

Image: Remote access via mobile devices and computers.
6.2. Recording Modes
The NVR supports several recording modes:
- Continuous Recording: 24/7 constant recording (requires a hard drive).
- Motion Detection Recording: Records only when motion is detected, saving storage space.
- Scheduled Recording: Allows you to set specific periods for recording.
- Cyclical Recording: Overwrites older video files when the hard drive is full.
6.3. Playback and Smart Search
Use the NVR interface or the Annke Vision app to review recorded footage. The smart playback feature allows for efficient searching of events on the timeline.

Image: Smart search and playback interface.
6.4. Human & Vehicle Detection
The system utilizes advanced algorithms to distinguish between human and vehicle movements and other objects, significantly reducing false alarms. Configure detection zones and sensitivity settings via the NVR or app.

Image: Human and vehicle detection in action.
6.5. Night Vision Modes
The cameras feature Smart Dual-Light technology with three night vision modes:
- 66ft Color Night Vision: Provides full-color images in low-light conditions.
- 100ft IR Night Vision: Standard infrared black and white vision for complete darkness.
- Smarter Human & Vehicle-Triggered Color Mode: Switches to color night vision only when human or vehicle motion is detected, saving power and reducing unnecessary light.

Image: Different night vision modes.
6.6. Instant Alerts
Receive instant push notifications on your mobile device via the app and email alerts with on-scene snapshots when motion is detected.

Image: Instant alert notifications.
6.7. Privacy Mask and Region of Interest (ROI)
Configure up to 4 programmable polygon privacy masks to block out sensitive areas from recording. Use Region of Interest (ROI) to focus on specific areas for higher image quality in the main stream.

Image: Customization of detection and private areas.
7. Maintenance
- Regularly clean camera lenses with a soft, dry cloth to ensure clear image quality.
- Keep the NVR free from dust and ensure adequate ventilation to prevent overheating.
- Check cable connections periodically for any signs of wear or damage.
- Ensure firmware is up-to-date for optimal performance and security.
- Back up important recordings regularly, especially before performing any major system changes.
8. Troubleshooting
8.1. No Video Display
- Check power connections for both NVR and cameras.
- Verify HDMI/VGA cable connection to the monitor.
- Ensure cameras are properly connected to NVR PoE ports.
- Restart the NVR.
8.2. No Recording
- Check if a hard drive is installed and properly initialized in the NVR settings.
- Verify recording schedules and motion detection settings.
- Ensure there is sufficient storage space on the hard drive.
8.3. False Alarms
- Adjust motion detection sensitivity.
- Utilize human and vehicle detection features to filter out irrelevant movements.
- Define detection zones to exclude areas with frequent non-threatening motion (e.g., trees swaying).
8.4. Remote Access Issues
- Ensure the NVR is connected to the internet.
- Verify network settings on the NVR and your mobile device.
- Check if the Annke Vision app is up-to-date.
- Confirm correct login credentials for the app.
9. Specifications
9.1. NVR Specifications
| Category | Feature | Specification |
|---|---|---|
| Video & Audio | Decoding Format | H.264+/H.264/H.265/H.265+ |
| IP Video Input | 8CH PoE | |
| Video Output | HDMI up to 4K (4096 × 2160), VGA up to 1080p (1920 × 1080) | |
| Audio Input/Output | 1/1 RCA | |
| Incoming/outgoing Bandwidth | 80/80 Mbps | |
| Max Recording Resolution | Up to 12MP (4096 X 3072)@30fps (Frame rate depends on IP camera) | |
| Max Playback Resolution | Up to 12MP (4096 X 3072)@30fps (Frame rate depends on IP camera) | |
| Max Playback Channel | 8CH | |
| Max Playback Capacity | 1-ch@12 MP (4096 X 3072) (30 fps)/3-ch@4 MP (30 fps)/6-ch@1080p (30 fps) | |
| Hard Drive | HDD | 1 SATA Interface |
| HDD Capacity | Up to 8 TB Capacity | |
| External Interface | Network Interface | 1, RJ-45 10/100Mbps self-adaptive Ethernet interface |
| PoE | 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface, IEEE 802.3 af/at | |
| USB interface | USB 2.0*2 | |
| Smart Function | Deep learning | 8-ch Human and vehicle targets detection (Need IP camera support) 4-ch Human and vehicle targets detection (IP camera does not need to support this function but the resolution cannot exceed 4MP) |
| Smart Event | Line crossing detection, intrusion detection, region entrance detection, region exiting detection (Need IP camera support) | |
| Operating Power | DC 48 V | |
| General | Power Consumption | ≤10 W (Without HDD and PoE) PoE: Max 25.5 W for Single Port |
| Working Temperature | 14 °F ~ 131 °F / -10 °C ~ +55 °C | |
| Dimensions (W X H X D) | 12.4” X 9.4” X 1.9” / 315 X 240 X 48 mm | |
| Weight (Without Hard Disk) | 2.2 lbs / 1 kg |
9.2. IP Camera Specifications
| Category | Feature | Specification |
|---|---|---|
| Camera | Image Sensor | 1/3" Progressive Scan CMOS |
| Max resolution | 3K (3072*1728), 16:9 picture ratio | |
| Main Stream | 50 Hz: 20 fps (3072*1728), 25 fps (1920 X 1080, 1280 X 720) 60 Hz: 20 fps (3072*1728), 24 fps (1920 X 1080, 1280 X 720) | |
| Substream | 50 Hz: 25 fps (1280 X 720, 640 X 480, 640 X 360) 60 Hz: 24 fps (1280 X 720, 640 X 480, 640 X 360) | |
| Video Compression | Main stream: H.265+/H.265/H.264+/H.264 Sub-stream: H.265/H.264/MJPEG | |
| Video Bitrate | 32 Kbps - 6 Mbps | |
| Audio Compression | G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/AAC | |
| Audio Input | Built-in Microphone, record with audio | |
| Lens | 2.8 mm | |
| Min. Illumination | Color: 0.005 Lux @ (F1.6, AGC ON), B/W: 0 Lux with IR | |
| Angle of View | Horizontal FOV 98°, vertical FOV 54°, diagonal FOV 114° | |
| Supplement Light Type | Smart Dual-Light, IR, White Light | |
| Supplement Light Range | Up to 30 m | |
| Motion detection 2.0 | Support, include Human & Vehicle detection | |
| Image Enhancement | BLC, HLC, 3D DNR | |
| General | Wide Dynamic Range | 120 dB WDR |
| Protocols | TCP/IP, ICMP, DHCP, DNS, HTTP, RTP, RTSP, NTP, IGMP, IPv6, UDP, QoS, FTP, SMTP | |
| API | Open Network Video Interface Version 18.12 | |
| Region of Interest (ROI) | 1 fixed region for main stream | |
| Privacy Mask | 4 programmable polygon privacy masks | |
| Ethernet | 1 RJ45 10 M/100 M self-adaptive Ethernet port | |
| Housing | Metal & Plastic | |
| Physical & Environmental | Color | Black |
| Storage | Built-in microSD/SDHC/SDXC Slot, up to 256 GB | |
| Hardware Reset | Yes | |
| Operating Power | DC 12 V± 25%, max. 5 W; PoE (802.3af), max. 6.5 W | |
| Operating Temperature | -22 °F – 140 °F / -30 °C – 60 °C | |
| Indoor/Outdoor Use | Indoor/Outdoor | |
| Dimensions | Interface Protection | IP67 |
| Dimension (L X W X H) | Ø110 mm × 89.2 mm (Ø4.3" × 3.5") | |
| Weight | Approx. 340 g (0.7 lb.) |
10. User Tips
- For optimal night vision performance, ensure there are no obstructions directly in front of the camera lens that could reflect IR light.
- When setting up motion detection, consider the angle of the camera and potential environmental factors (e.g., moving branches, shadows) that might trigger false alarms. Adjust sensitivity and detection zones accordingly.
- Utilize the H.265+ compression to maximize your hard drive's storage capacity, allowing for longer recording periods.
- Regularly check the Annke Vision app for system status and alerts to ensure continuous security monitoring.
- If experiencing network issues, try restarting both your router and the NVR.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Annke website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.