1. Introduction
Thank you for choosing the RuoShui WiFi Weather Station. This system collects and automatically uploads accurate, detailed weather data to online platforms like Weather Underground and Weathercloud, allowing you to access and upload weather data freely. It is designed for professional weather observers or serious enthusiasts, offering local forecasts, high/low temperatures, total temperatures, and averages of various weather variables without needing a PC/Mac.
The 7-in-1 outdoor sensor measures outdoor temperature, humidity, wind, rain, UV, and light. It supports up to 7 separate temperature and humidity sensors for continuous data transmission to the console. Both sensors are pre-assembled and calibrated for easy installation, sending data to the console via a low-power radio frequency over distances up to 100 meters (330 feet) line-of-sight.
The console features an embedded high-speed processor for analyzing incoming weather data, which can be distributed to wunderground.com and weathercloud.net via your home's Wi-Fi router. It can also synchronize with an Internet time server for accurate time and weather data timestamps. The color LCD display provides informative weather readings, advanced features like high/low alarms, different weather indices, and max/min records. The system also includes calibration and moon phase functions, making it a comprehensive weather forecasting system.
This manual contains useful information on the proper use and care of this product. Please read it thoroughly to understand and enjoy its features, and keep it handy for future reference.
2. Precautions and Warnings
- It is strongly recommended to keep and read this User's Manual. The manufacturer and supplier accept no responsibility for any incorrect readings, lost exit data, or consequences resulting from inaccurate readings.
- This product should not be used for medical purposes or for publicity purposes.
- Do not expose the device to external forces, vibrations, dust, excessive temperature or humidity.
- Do not cover the ventilation holes with newspapers, curtains or anything else.
- Do not immerse the device in water. If liquid is spilled on the appliance, wipe it dry immediately with a soft, lint-free cloth.
- Do not use abrasive or corrosive materials to clean the appliance.
- Do not tamper with the internal components of the appliance. Otherwise the warranty is void.
- Placement of this product on certain types of wood may result in damage to its finish, for which the manufacturer is not responsible. For information, consult the furniture manufacturer's care instructions.
- Use only new batteries. Do not mix old and new batteries.
- Use only the accessories specified by the manufacturer.
- Images shown in this manual may differ from the actual display.
- When disposing of this product, ensure that it is collected separately for special handling.
- This product should only be used with the supplied adapter: Manufacturer: TDC Power products, Model: SA5E-059-0500FA.
- Caution! Danger of explosion if incorrect type of battery is replaced.
- Batteries must not be exposed to extreme environments such as high or low temperatures, low air pressure, high altitude, etc., during use, storage or transportation, as this may result in an explosion or leakage of flammable liquids or gases.
- Throw the battery into a fire or hot oven, or crush or cut the battery by mechanical means, which may cause an explosion.
- Do not swallow the battery, risk of chemical burns.
- This product contains button cell batteries. If swallowed, button cell batteries can cause severe internal burns in as little as 2 hours and may result in death.
- Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think the batteries may have been swallowed or placed in any part of the body, seek medical attention immediately.
- The socket should be mounted near the device and easily accessible.
- The contents of this manual may not be reproduced without the manufacturer's permission.
- The technical specifications of this product and the contents of the user manual are subject to change without notice.
- When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
- This product is not a toy. Keep out of reach of children.
- The console should only be used indoors.
- Place the console at least 20cm away from nearby persons.
- Install the sensor array at least 5ft (1.5m) from any building, structure, ground, or roof top.
- Any metal object may attract a lightning strike, including your weather station mounting pole. Never install the weather station in a storm.
- If you are mounting the weather station to a house or structure, consult a licensed electrician for proper grounding. A direct lightning strike to a metal pole can damage or destroy your home.
- Installing your weather station in a high location may result in injury or death. Perform as much of the initial check out and operation on the ground and inside a building or home. Only install the weather station on a clear, dry, day.
3. Setup
3.1. Packing List
The FT0310 weather station consists of a display console, Integrated Outdoor Sensors and mounting hardware. The FT0320 adds one remote thermo-hygrometer sensor (No.:016TH).
Unpacking: Open your weather station box and inspect that the contents are intact (nothing broken) and complete (nothing missing). Inside you should find the following:
| QTY | Item | Image |
|---|---|---|
| 1 | Display Console (Frame: 215x158x22mm, LCD: 170x125mm) | ![]() |
| 1 | Integrated Outdoor Transmitter (Dimensions: 330x150x280mm) | ![]() |
| 1 | Remote Thermo-hygrometer Transmitter (No.: 016TH) (Dimensions: 75x53x22mm) Only Suitable for FT0320 | ![]() |
| 1 | Foot Mounting (with pole insert) (Dimensions: 101x76x37mm) | ![]() |
| 1 | Mounting Bracket Back Plate (pole mount) (Dimensions: 76x75x20mm) | ![]() |
| 1 | Mounting Pole (11.8x1.18x0.79inch / 300x30x20mm) | ![]() |
| 2 | Pole mounting nuts (M3) / bolts Ø3 | ![]() |
| 4 | Pole mounting nuts (M5) / bolts (Ø5) | ![]() |
| 1 | Manual and Power Adapter | ![]() |
Note: Batteries for the outdoor sensor package are not included. You will need 2 AA size batteries, alkaline or Lithium batteries (Lithium recommended for colder climates).
3.2. Integrated Outdoor Sensor Installation
The wireless 7-in-1 sensor measures wind speed, wind direction, rainfall, UV index, light intensity, temperature, and humidity. It comes assembled and calibrated for easy installation.
Assembly the Stand and Pole
Fasten the integrated transmitter to mounting pole brackets with foot-mounting, using two Ø3 bolts and M3 nuts, as shown in Figure 4.
Tighten the mounting pole to your existing mounting pole with the four Ø5 Bolts and M5 Nuts assembly, or fix on the wall with four tapping screws, as shown in Figure 5.
Install Wireless Thermo-Hygrometer Sensor (No.:016TH)
It is recommended to mount the Thermo-hygrometer sensor outside in a shaded area. The North facing wall is preferred because it is in the shade most of the day. Direct sunlight and radiant heat sources will result in inaccurate temperature readings.
3.3. Battery and Power Installation
Setup the Display Console
Plug in the display console with the provided power adapter. "BL ON" will display in the time area for three seconds when powered up. It is recommended to use the power adapter to reduce battery consumption and extend service life.
Display Console Batteries Installation
Remove the battery door on the back of the display. Install three AAA (alkaline or lithium) batteries. The display will beep once and the layout will light up for a few seconds to verify all segments are operating properly.
Note: The battery is a back-up for the weather station console, saving console settings when powered off from the adapter.
Insert Batteries into the Integrated Outdoor Transmitter
Locate the battery door on the transmitter, push and open the battery compartment. Remove the battery door on the back of the sensor by removing the set screw.
Insert 3xAA batteries in the battery compartment. Lithium AA batteries are recommended for sensors. Close the battery door, ensuring the gasket is properly seated, and tighten the set screw.
Note: Do not install batteries backwards, as this can permanently damage the sensors. The solar panel does not charge the batteries, so rechargeable batteries are not needed or recommended.
The sensor LED indicator will light for 3 seconds, and then flash once per 16 seconds thereafter, indicating data transmission. If the sensor does not power up, press the reset button.
Insert Batteries into the Thermo-Hygrometer Sensor (No.:016TH)
Insert two AAA batteries (with the negative terminal in contact with each spring). Lithium batteries are recommended for cold weather environments.
3.4. Channel Number and Temperature Units (DIP Switches)
Before inserting batteries, locate the dip switches on the inside cover of the lid of the transmitter. The factory default setting has all four switches in the OFF position.
Channel Number: The weather station supports up to eight transmitters. To set each channel number (default is Channel 1), change Dip Switches 1, 2 and 3 as referenced in the table below.
Temperature Units of Measure: To change the transmitter display units of measure (°F vs. °C), change Dip Switch 4 as referenced in the table below.
| DIP SWITCH | FUNCTION | |||
|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |
| DOWN | DOWN | DOWN | --- | Channel 1 |
| DOWN | DOWN | UP | --- | Channel 2 |
| DOWN | UP | DOWN | --- | Channel 3 |
| DOWN | UP | UP | --- | Channel 4 |
| UP | DOWN | DOWN | --- | Channel 5 |
| UP | DOWN | UP | --- | Channel 6 |
| UP | UP | DOWN | --- | Channel 7 |
| UP | UP | UP | --- | Channel 8 |
| --- | --- | --- | DOWN | °F |
| --- | --- | --- | UP | °C |
Note: Each time you change the temperature unit and the channel, you have to take out of batteries firstly before switching °F/°C button and Channel, otherwise when batteries installed the switch of °F/°C button will not be effective. We recommend fresh lithium batteries for sensors. When outdoor temperature is lower than -4 °F (-20 °C), the battery might not work properly.
3.5. Site Survey Before Installation
Perform a site survey before installing the weather station. Consider the following points:
- You must clean the rain gauge once per year and change the batteries every two years. Provide easy access to the weather station.
- Avoid radiant heat transfer from buildings and structures. Install the sensor array at least 5ft (1.5m) from any building, structure, ground, or roof top.
- Avoid wind and rain obstructions. The rule of thumb is to install the sensor array at least four times the distance of the height of the tallest obstruction. For example, if the building is 20ft (6m) tall and the mounting pole is 6ft (2m) tall, install 4 x (20 – 6)' = 56ft (17m) away. Use common sense. If the weather station is installed next to a tall building, the wind and rain will not be accurate.
- Wireless Range: The radio communication between the display console and transmitter in an open field can reach a distance of up to 330ft (100m), assuming no interfering obstacles such as buildings, trees, vehicles, or high voltage lines. Wireless radio signals will not penetrate metal buildings. Most wireless applications will only reach up to 100ft (30m) due to building obstructions, walls, and interference.
- Radio interference from PCs, radios, or TV sets can, in the worst case, entirely cut off radio communication. Consider this when choosing display console or mounting locations.
Best Practices for Wireless Communication
Wireless communication is susceptible to interference from distance, walls, and metal barriers. We recommend the following practices for trouble-free wireless communication:
- Electro-Magnetic Interference (EMI): Keep the console several feet away from computer monitors and TVs.
- Radio Frequency Interference (RFI): If you have other 433 MHz devices and communication is intermittent, try turning off these other devices for troubleshooting purposes. You may need to relocate the wireless transmitters or receivers to avoid intermittent communication.
- Line of Sight Rating: This device is rated at 300ft line of sight (no interference, barriers or walls) but typically you will get 100ft maximum under most real-world installations, which include passing through barriers or walls.
- Metal Barriers: Radio frequency will not pass through metal barriers such as aluminum siding. If you have metal siding, align the remote and console through a window to get a clear line of sight.
The following table shows the reception loss vs. the transmission medium. Each “wall” or obstruction decreases the transmission range by the factor shown below.
| Medium | RF Signal Strength Reduction |
|---|---|
| Glass (untreated) | 5-15% |
| Plastics | 10-15% |
| Wood | 10-40% |
| Brick | 10-40% |
| Concrete | 40-80% |
| Metal | 90-100% |
Northern Hemispheres (NOR) Setup
The cardinal directions (S) molded on the body of the outdoor sensor are indicators for the Northern Hemisphere only.
- There is a “S” indicator on the wind vane that indicates South. Align this “S” marker in the direction of South.
- Console operation is set to Northern Hemispheres (NOR in the time area) in Location division.
Note: There are four alphabet letters of “N”, “E”, “S” and “W” around the wind direction, representing the direction of North, East, South and West. The wind direction sensor has to be adjusted so that the directions on the sensor are matching with your real location. Permanent wind direction error will be introduced when the wind direction sensor is not positioned correctly during installation.
Southern Hemispheres (SOU) Setup
For Southern Hemisphere installations, ignore the (S) indicator and face the solar panel to the North (and in a sunny position) when installing the Integrated outdoor transmitter.
- Install the Integrated outdoor transmitter and face the solar panel North.
- Console operation is set to Southern Hemispheres (SOU in the time area) in Location division.
3.6. Setting Up a Wi-Fi Connection
Your console is capable of sending your sensor data to select internet-based weather services. The supported services are:
- Weather Underground: Site: https://wunderground.com provides local & long-range weather forecasts, weather reports, maps & tropical weather conditions for locations worldwide.
- Weathercloud: Site: https://weathercloud.net A large network of weather stations reporting data in real time from all over the world.
When the console successfully connects to your Wi-Fi router, the Wi-Fi signal icon
will appear on the LCD display (behind the Outdoor humidity). If the Wi-Fi signal is not stable or the console is trying to connect to the router, the icon will flash. If the icon disappears, it means the console is not connected to the Wi-Fi router.
Note: If you own a dual band router (2.4 GHz and 5.0 GHz), make sure you connect to the 2.4 GHz band, otherwise it will fail to connect the weather station to WiFi.
Registering with and using Weather Underground
- Visit Wunderground.com and select the Join link at the top of the page and sign up.
Step 1: Weather Underground Sign Up Page. - Click My Profile and select My Devices to register your station.
Step 2: Weather Underground My Devices section. - Select Add New Device.
Step 3: Adding a new device on Weather Underground. - Find Personal Weather Station. Select ‘other’ and click 'Next'.
Step 4: Selecting 'other' as the Personal Weather Station type. - Select 'Address' or ‘Manual’ option, and find your local position. Press ‘Next’.
Step 5: Setting your station's location on Weather Underground. - Fill out the details about your weather station.
Step 6: Providing details for your weather station on Weather Underground. - After completing the weather station registration, you will see your station ID and key/password. Take note of these.
- Refresh the page. You may need to wait a few minutes until the status becomes ‘Online’. Then you can click the device name to view data.
Registering with and using Weathercloud.net
- Register on https://weathercloud.net, select your login information under "Join Us Now" and follow the instructions to create your account.
Step 1: Weathercloud registration page. Note: To register your account, please enter a valid email address on which you will receive an authorization email when you register.
- Log in to Weathercloud, go to the "Devices" page, and click "Create Device" to create a device.
- If a device has already been added to the server, click New (+ New) in the upper right corner to create another new device.
- At the "Create new device" screen, fill in the following:
- "Name": Name the device.
- "Model" (Device Type): Please select "other Series".
- "Link Type": Select "any link type".
- "Location": Enter the Weather station's location data: Country, State/Province, City, Time Zone.
- "Get Coordinates": Use the "Get Coordinates" button to display the world map and select the exact location of the weather station with the mouse cursor. Press the "Done" button at the bottom of the map window to store the selected area. You can also enter the coordinates manually in the fields provided.
Once you have completed all the data required for device registration, create the device using the "Create" button at the bottom right of the page.
- To get a unique ID key, move the mouse cursor over the "Settings" button to open the drop-down menu. Select "Link" to display Weathercloud "ID" and "Key". Take a note of the generated data displayed.
Step 5: Accessing Weathercloud device settings to retrieve ID and Key. Note: Please be case-sensitive while writing data.
- Setting up Wi-Fi Connection on Console:
- Plug in the Adapter and Power up the Console.
- Make sure the WiFi icon is flashing.
- Open the WiFi list on your Laptop and select your WLAN (e.g., Weatherhome-*****).
- Enter the following IP address into any internet browser:
http://192.168.5.1to access the console's web interface. (Make sure you include the header "http://", not just the IP address). - In the web interface, select your WiFi router (SSID) (only supports 2.4GHz Router) and enter the WiFi password.
- Copy and Paste the ID and key information from the Weather Underground or Weathercloud website. Fill in all the other blank tables and save.
- Click Save and the Status display will show "connected IP", indicating connection is complete and you can view data on WU or WC website.
WiFi Connection Setup Interface on the console's web page. Note: The recommended browsers include the latest versions of Chrome, Safari, Edge, Firefox or Opera. If your PC is connected to the internet service via an RJ45 (Ethernet) cable, external modem or other unit, please disconnect it during the weather station setup to avoid IP address setup collision. It will be necessary to complete all items each time you edit in the administration environment. Any data entered in previous setup will be lost. Once WiFi is connected and data is being uploaded, the WiFi and weather data uploading icons stay solid. Sometimes you need to wait about 30 minutes to see the updated data online. The console will display
after successful networking, which means the data can be transmitted normally.
4. Operation
The console has five keys for easy operation: MIN/MAX/-key, ALARM key, SET/MODE key, CHANNEL/+ and SNOOZE key.
4.1. Quick Display Mode
While in Normal Mode, press (do not hold) the SET/MODE key to enter the Quick Display Mode as follows:
- Once for time, time/week and date
- Twice for indoor temperature, dew point
- Three for rainfall.
- Four for outdoor dew point temperature
- Five for wind average
- Six for pressure
- Seven for sensor dew point
- Time, Time/Week and Date: Press the CHANNEL/+ or MAX/MIN/- key to toggle between time, time/week and date.
- Indoor Temperature: Press the CHANNEL/+ or MAX/MIN/- key to toggle between temperature and dew point.
- Rainfall: Press the CHANNEL/+ or MAX/MIN/- key to toggle between rate, 24h, week, month and total. To clear the total rain, press the CHANNEL/+ or MAX/MIN/- button until total rain is displayed. The total rain will flash. Press and hold the SET button for five seconds until total rain reads 0.0.
- Outdoor Dew Point: Press the CHANNEL/+ or MAX/MIN/- key to toggle between AT (Apparent Temperature) and dew point.
- Wind Average: Press the CHANNEL/+ or MAX/MIN/- key to toggle between current, 2mins and 10 minutes.
- Absolute Pressure and Relative Pressure: Press the CHANNEL/+ or MAX/MIN/- key to toggle between absolute pressure and relative pressure.
- Sensor Heat Index: Press the CHANNEL/+ or MAX/MIN/- key to toggle between sensor heat index and dew point.
Note: To exit the Quick Display Mode at any time, press the SNOOZE key of the display console.
4.2. Set (Program) Mode
While in Normal Mode, press and hold the SET(MODE) key for at least three seconds to enter the Set Mode. The first setting will begin flashing. You can press the SET(MODE) key again to skip any step.
Note: In the Set mode, press the [+] key or [-] key to change or scroll the value. Hold the [+] key or [-] key for three seconds to increase/decrease rapidly. To exit the Set mode at any time, press the SNOOZE button of the display console.
- Time SYNC (default: ON): Press the SET key again to set the network time sync. Press the [+] key or [-] key to switch between SYNC time ON and SYNC time OFF of measure.
- 12/24 Hour Format (default: 24h): Press the SET(MODE) key again to adjust the 12/24 hour format setting (FMT). Press the [+] key or [-] key to change between 12 hour and 24 hour format.
- Change Hour: Press the SET(MODE) key again to set the hour. Press the [+] key or [-] key to adjust the hour up or down. Note the PM icon is present during afternoon hours.
- Change Minute: Press the SET(MODE) key again to set the minute. Press the [+] key or [-] key to adjust the minute up or down.
- Date Format (default: MM-DD): Press the SET(MODE) key again to enter the day/month format mode. Press the [+] key to switch between MM-DD, DD-MM.
- Change Month: Press the SET(MODE) key again to set the calendar month. Press the [+] key or [-] key to adjust the calendar month.
- Change Day: Press the SET(MODE) key again to set the calendar day. Press the [+] key or [-] key to adjust the calendar day.
- Change Year: Press the SET(MODE) key again to set the calendar year. Press the [+] key or [-] key to adjust the calendar year.
- Max/Min Clearing (default: ON): Press the SET(MODE) key again to set the max/min clearing mode (CLR). The Max/Min can be programmed to clear daily (at midnight) or manually. Press the [+] key or [-] key to switch between “Clears 24h” and Clears Manually.
- Temperature Units of Measure (default: °C): Press the SET(MODE) key again to change the temperature units of measure (the UNITSET icon will be displayed). Press the [+] key or [-] key to switch between °F and °C units of measure.
- Wind Speed Units of Measure (default: m/s): Press the SET(MODE) key again to change the wind speed units of measure. Press the [+] key or [-] key to toggle the wind speed units between m/s, km/h, mph, knots, ft/s or bft.
- Rainfall Units of Measure (default: mm): Press the SET(MODE) key again to change the Rainfall units of measure. Press [+] key or [-] key to toggle the rainfall units between mm and inch.
- Barometric Pressure Display Units (default: hPa): Press the SET(MODE) key again to change the pressure units of measure. Press the [+] key or [-] key to toggle the pressure units between mmhg, inHg or hPa.
- Pressure Threshold Setting (default level 2): Press the SET(MODE) key again to change the pressure threshold. Press the [+] key or [-] key to change pressure threshold 2 mbar/hour to 4 mbar/hour.
- Weather Icons Setting (default: partly cloudy): Press the SET(MODE) key again to change the initial weather icon. Press the [+] key or [-] key to select the initial weather icon of Sunny, Cloudy, Partly Cloudy or Rainy.
- Sunlight Display Units (default: W/m²): Press the SET(MODE) key again to change the sunlight units of measure. Press the [+] key or [-] key to toggle the sunlight units between W/m², fc or lux.
- Location division (default: Northern Hemisphere): Press the SET(MODE) key again to change the location division. Press the [+] key or [-] key to toggle the sunlight units Northern Hemisphere (NOR) or Southern Hemisphere (SOU).
4.3. Max/Min Viewing and Reset Mode
Max Record Viewing and Reset
In normal mode, press (do not hold) the MIN/MAX/- key. The MAX icon will be displayed in the date area. Press the SET/MODE key to view max values of rainfall (rate, 24h, week or month), pressure (ABS or REL), outdoor temperature and humidity (AT or dew point) and indoor temperature and humidity (temp or dew point).
Press the CHANNEL/+ button to switch the display between remote thermo-hygrometer sensors 1 through 8 to view Max values.
Press the MIN/MAX/- key for three seconds to clear all max values (rainfall, wind speed, wind gust, pressure, temperature and humidity maximum values). The maximum values will now display the current values.
Press the SNOOZE key to exit the min/max checking and cleaning mode, return to normal display mode.
Note: If you own more than one thermo-hygrometer sensor, the minimum and maximum value of all sensors will be cleared in the reset mode. The Maximum values will display the current values after reset.
Min Record Viewing and Reset
Press the MAX/MIN/- key again (do not hold), the MIN icon will be displayed. Press the SET/MODE key to view Min values of pressure (ABS or REL), outdoor temperature and humidity (AT and feels like), indoor temperature and humidity (temperature or dew point), sensor temperature and humidity, sensor dew point (heat index).
Press the CHANNEL/+ button to switch the display between remote thermo-hygrometer sensors 1 through 8 to view Min values.
Press the MAX/MIN/- key for three seconds to clear all Min values (pressure, temperature and humidity minimum values).
Press the SNOOZE key to exit the min/max checking and reset mode, return to normal display mode.
Note: The Minimum values will display the current values after reset.
4.4. Back Light Mode
Adjustable Brightness of Backlight
There are 3 levels of brightness of backlight. When the backlight is on, press the SNOOZE key to switch between the 3 levels.
When backlight is off, press and hold the SNOOZE key for two seconds, the backlight will turn on permanently, and BL ON icon will be displayed for three seconds in the date area.
To turn off the backlight at any time, press and hold the SNOOZE key for two seconds. BL OFF icon will be displayed for three seconds in the date field.
Note: If plugged into AC power, the time area will display AC ON and the backlight will remain on. It is not recommended leaving the backlight on for a long period of time when operating on batteries only, or the batteries will run down quickly. The backlight operation is different when operating on batteries to save power.
If the display console is only powered by battery, and the backlight is off, press the SNOOZE/LIGHT button once. The backlight will turn on for five seconds, and if no operation is performed for three seconds, the backlight will turn off.
4.5. Alarm Mode
The weather station includes the following alarms:
- Time (Alarm 1 and Alarm 2)
- Outdoor Temperature
- Outdoor Humidity
- Outdoor AT (Apparent Temperature)
- Outdoor Dew Point
- Outdoor Feels Like Temperature
- Wind Gust
- Wind Average
- Rate Rainfall
- 24 Hour Rainfall
- Absolute Pressure
- Relative Pressure
- Indoor Temperature
- Indoor Humidity
- Indoor Dew Point
- UV Index
- Sunlight
Alarm Triggered
When an alarm condition is exceeded, the alarm icon (visual) will flash and the alarm beeper will sound (audible). To silence the beeper, press any key.
View High/Low Alarms Value
To view the current alarm settings, press the ALARM key to enter the alarm mode. HI AL 1 will be displayed in the date area. At the same time, Alarm 1 time and HI alarm parameters of indoor temperature and humidity, outdoor temperature and humidity, rain rate, AT, feels like, wind gust, wind average, absolute pressure, UV index, Sunlight, Sensor (CH1) temp humidity and dew point are displayed.
Press SET/MODE key to view Alarm 2 time and HI alarm parameters of indoor dew point, 24h rainfall, outdoor dew point, relative pressure.
Press ALARM key again to view the LOW alarms along with the alarm clock time in the same way as HI alarms.
Press ALARM key again to return to normal mode.
Note: Press the SNOOZE key at any time to return to the normal mode in HI/Low alarm mode.
Setting the Alarms
Press ALARM key to enter the alarm mode. Press and hold the SET/MODE key for three seconds. The first alarm parameter will begin flashing (alarm hour).
To save the alarm setting and proceed to the next alarm parameter, press (do not hold) the SET/MODE key.
To adjust the alarm parameter, press the CHANNEL/+ key or MAX/MIN/- key to increase or decrease the alarm settings, or press and hold the CHANNEL/+ key or MAX/MIN/- key for three seconds to increase or decrease the alarm settings rapidly.
Press the ALARM key to turn on (the alarm icon will appear) and off the alarm.
Press the SNOOZE key twice at any time to return to the normal mode. After 30 seconds of inactivity, the alarm mode will time out and return to normal mode.
Note: To prevent repetitive temperature alarming, there is a 0.9 °F (0.5°C) tolerance band. For example, if you set the high alarm to 80.0°F (26.7°C) and silence the alarm, the alarm icon will continue to flash until the temperature falls below 79.1°F (26.2°C), at which point, the alarm will reset and must increase above 80.0°F (26.7°C) to activate again.
Note: To prevent repetitive alarming of humidity, there is a 4% tolerance band in humidity alarm. For example, if you set the high alarm to 60% and silence the alarm, the alarm icon will continue to flash until the humidity falls below 56%, at which point, the alarm will reset and must increase above 60% to activate again.
Alarm and Key Beeper On/Off
Press any button to silence the alarm sound.
In normal mode, press and hold the ALARM key for three seconds to toggle the BZ ON (beeper on) or BZ OFF (beeper off) depending on the current setting.
The display console returns to normal mode without any operation in three seconds.
4.6. Optional Calibration Mode
Note: The calibrated value can only be adjusted on the display console. The outdoor remote sensor(s) always displays the UN-calibrated or measured value. The measured humidity range is between 10% and 99%. Humidity cannot be accurately measured outside of this range. Thus, the humidity cannot be calibrated below 10% or above 99%.
The purpose of calibration is to fine tune or correct for any sensor error associated with the device's margin of error. The measurement can be adjusted from the console to calibrate to a known source.
Calibration is only useful if you have a known calibrated source you can compare it against, and is optional. This section discusses practices, procedures and sources for sensor calibration to reduce manufacturing and degradation errors. Do not compare your readings obtained from sources such as the internet, radio, television or newspapers. They are in a different location and typically update once per hour.
The purpose of your weather station is to measure conditions of your surroundings, which vary significantly from location to location.
Calibration of Temperature
In normal mode, press and hold the SET/MODE and CHANNEL/+ keys at the same time for five seconds to enter the temp calibration mode. The indoor temperature will begin flashing.
Press the CHANNEL/+ key or MAX/MIN/- key to increase or decrease the temperature reading (in increments of 0.1). Press and hold the CHANNEL/+ key or MAX/MIN/- key for three seconds to increase or decrease rapidly.
Press the ALARM key to reset the current value.
Press the SET key to switch to outdoor Temperature. Press the SET key again to sensor temperature (1 through 8).
To exit the temperature calibration mode at any time, press the SNOOZE/LIGHT button on the top of the display console. If no operation is performed, the calibration mode will timeout in 30 seconds.
Calibration of Humidity
In normal mode, press and hold the SET/MODE and MAX/MIN/- keys at the same time for five seconds to enter into the humidity calibration mode. The indoor humidity will begin flashing.
Press the CHANNEL/+ key or MAX/MIN/- key to increase or decrease the humidity reading (in increments of 1%). Press and hold the CHANNEL/+ key or MAX/MIN/- key for three seconds to increase or decrease rapidly.
Press the ALARM key to reset the current value.
Press the SET key to switch to outdoor Temperature. Press the SET key again to sensor temperature (1 through 8).
To exit the console humidity calibration mode, press the SNOOZE or SET/MODE button on the display console. If no operation is performed, the calibration mode will timeout in 30 seconds.
Note: Humidity is a difficult parameter to measure accurately and drifts over time. The calibration feature allows you to zero out this error. To calibrate humidity, you will need an accurate source, such as a sling psychrometer or Humidipaks One Step Calibration kit.
Calibration of Sensors (Pressure, Wind Gust, Rainfall, Sunlight)
In normal mode, press and hold the SET/MODE and ALARM keys at the same time for five seconds to enter the pressure, wind gust, rainfall and sunlight calibration mode. The letter “CAL” will appear on the screen.
Press the SET/MODE key to skip over a parameter to the next.
Absolute Pressure Calibration
In the calibration mode, the “ABS” symbol will display at the pressure section, the absolute pressure value will flash. (The default value is 0.00 inHg)
Press the CHANNEL/+ key or MAX/MIN/- key to increase or decrease the absolute pressure value (in increments of 0.01 inHg). Press and hold the CHANNEL/+ or MAX/MIN/- key for three seconds to increase or decrease rapidly.
Press the ALARM key to reset the current value.
Example: If calibrated pressure sources measure 28.37 inHg and the display console pressure reads 28.75 inHg, the offset = 28.37 - 28.75 = -0.38 inHg.
Relative Pressure Calibration
In the calibration mode, press the SET/MODE key once, the “REL” symbol will display at the pressure section, the relative pressure value will flash. (The default value is 0.00 inHg)
Press the CHANNEL/+ key or MAX/MIN/- key to increase or decrease the relative pressure value (in increments of 0.01 inHg). Press and hold the CHANNEL/+ or MAX/MIN/- key for three seconds to increase or decrease rapidly.
Press the ALARM key to reset the current value.
Example: If calibrated pressure sources measure 25.00 inHg and the display console pressure reads 24.85 inHg, the offset = 25.00 - 24.85 = 0.15 inHg.
Note: The display console displays two different pressures: absolute (measured) and relative (corrected to sea-level).
Wind Speed Calibration
In the calibration mode, press the SET/MODE button twice and the wind speed value will flash (the default is 1.00).
Press the CHANNEL/+ key or MAX/MIN/- key to adjust the wind speed calibration factor from 0.75 to 1.25, where: Calibrated Wind Speed = Calibration factor x Measured Wind Speed.
Press and hold the CHANNEL/+ or MAX/MIN/- key for three seconds to increase or decrease rapidly.
Press the ALARM key to reset the current value.
Note: The wind gust is also affected by the wind speed calibration factor. Wind speed and wind gust are adversely affected by installation constraints. The rule of thumb is to install the weather station four times the distance of the height of the tallest obstruction. In many instances, due to trees and other obstructions, this is not possible. The wind speed calibration allows you to correct for these obstructions. In addition to installation challenges, wind speed bearings (any moving part) wear over time. To correct for wear, the correction value can be increased until the wind cups must be replaced. Without a calibrated source, wind speed is a difficult parameter to measure. We recommend using a calibrated wind meter and constant, high speed fan.
Rain Calibration
In the calibration mode, press the SET/MODE button three times and the rain value will flash (the default is 1.00).
Press the CHANNEL/+ key or MAX/MIN/- key to adjust the rain calibration factor from 0.75 to 1.25, where: Calibrated Rain = Calibration factor x Measured Rain.
Press and hold the CHANNEL/+ or MAX/MIN/- key for three seconds to increase or decrease rapidly.
Press the ALARM key to reset the current value.
Discussion: The rain collector is calibrated at the factory based on the funnel diameter. The bucket tips every 0.01” of rain (referred to as resolution). The accumulated rainfall can be compared to a sight glass rain gauge with an aperture of at least 4”.
Sunlight Calibration
In the calibration mode, press the SET/MODE button four times and the sunlight value will flash (the default is 1.00).
Press the CHANNEL/+ key or MAX/MIN/- key to adjust the sunlight calibration factor from 0.75 to 1.25, where: Calibrated Sunlight = Calibration factor x Measured Sunlight.
Press and hold the CHANNEL/+ or MAX/MIN/- key for three seconds to increase or decrease rapidly.
Press the ALARM key to reset the current value. Press the SET/MODE Key again to return to normal mode.
4.7. Weather Forecasting
The weather forecast or pressure tendency is based on the rate of change of barometric pressure. In general, when the pressure increases, the weather improves (sunny to partly cloudy) and when the pressure decreases, the weather degrades (cloudy to rain).
The weather forecast is an estimation or generalization of weather changes in the next 24 to 48 hours, and varies from location to location. The tendency is simply a tool for projecting weather changing conditions and is never to be relied upon as an accurate method to predict the weather.
Weather Icons
| Condition | Icon | Description |
|---|---|---|
| Sunny | ![]() | Pressure is rising and the previous condition is partly cloudy. |
| Partly Cloudy | ![]() | Pressure is falling and the previous condition is sunny or pressure is rising and the previous condition is cloudy. |
| Cloudy | ![]() | Pressure is falling and the previous condition is partly cloudy or pressure is rising and the previous condition is rainy. |
| Rainy | ![]() | Pressure is falling and the previous condition is cloudy. |
4.8. Moon Phase
The moon phases are displayed based on the calendar date.
4.9. Feels Like and Apparent Temperature
Feels like temperature is a combination of Heat Index and Wind Chill. Temperatures less than 4.4°C (40°F) display the wind chill. Temperatures greater than 26.7°C (80°F) display the heat index.
NWS Windchill Chart
The National Weather Service Windchill Chart provides perceived temperature based on actual temperature and wind speed.
NWS Heat Index Table
The National Weather Service Heat Index Table provides perceived temperature based on actual temperature and relative humidity.
4.10. Restore Factory Default
To reset the display console to factory default (WiFi network, Weather server and display), press the Min/Max button and re-plug the indoor display console at the same time. (Take out batteries before starting the reset operation).
5. Maintenance
5.1. Wireless 7-in-1 Sensor Maintenance
The following steps should be taken for proper maintenance of your station:
- Clean the rain gauge: Once every 3 months. Rotate the funnel counter-clockwise and lift to expose the rain gauge mechanism, and clean with a damp cloth. Remove any dirt, debris and insects. If bug infestation is an issue, spray the array lightly with insecticide.
- Clean the solar radiation sensor and solar panel: Every 3 months with a non-abrasive slightly damp cloth.
- Replace batteries: Every 1-2 years. If left in too long, the batteries may leak due to environmental challenges. In harsh environments, inspect the batteries every 3 months (while cleaning the solar panel).
- Corrosion prevention: When replacing the batteries, apply a corrosion preventing compound on the battery terminals, available at most hardware stores.
- Snowy environments: Spray the top of the weather station with anti-icing silicon spray to prevent snow build up.
Removing the Rain Collector Funnel
Installing the Rain Collector Funnel
6. Troubleshooting Guide
Look through the following table and locate an issue or problem you are experiencing in the left column and read possible solutions in the right column.
| Problem | Solution |
|---|---|
| Wireless remote (thermo-hygrometer) not reporting to console. Dashes (--.-) on display. | Move the sensor assembly closer to the display console. Install a fresh set of batteries in the remote sensor(s). Make sure the remote sensors are not transmitting through solid metal (acts as an RF shield), or earth barrier (down a hill). Radio Frequency (RF) Sensors cannot transmit through metal barriers (example, aluminum siding) or multiple, thick walls. Move the display console around electrical noise generating devices, such as computers, TVs and other wireless transmitters or receivers. |
| If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. | 1. To reacquire the signal, press and hold the CHANNEL/+ button for 3 seconds, choose the lost sensor and the remote search icon will be constantly displayed. Once the signal is reacquired, the remote search icon will turn off, and the current values will be displayed. 2. The maximum line of sight communication range is 100m (330ft) and 30 m (100ft) under most conditions. Move the sensor assembly closer to the display console. 3) If the sensor assembly is too close (less than 1.5m, 5ft), move the sensor assembly away from the display console. |
| Temperature sensor reads too high in the day time. | Make certain that the sensor array is not too close to heat generating sources or structures, such as buildings, pavement, walls or air conditioning units. |
| Absolute pressure does not agree with official reporting station. | You may be viewing the relative pressure, not the absolute pressure. Select the absolute pressure. Make sure you properly calibrate the sensor to an official local weather station. |
| Rain gauge reports rain when it is not raining. | An unstable mounting solution (sway in the mounting pole) may result in the tipping bucket incorrectly incrementing rainfall. |
| Data not reporting to Wunderground.com or weathercloud.net. | 1. Confirm your password is correct. It is the password you registered on Wunderground.com. Your Wunderground.com password cannot begin with a nonalphanumeric character (a limitation of Wundeground.com, not the station). Example, $oewkrf is not a valid password, but oewkrf$ is valid. 2. Confirm your station ID is correct. The station ID is all caps, and the most common issue is substituting an O for a 0 (or visa versa). Example, KAZPHOEN11, not KAZPH0EN11. 3. Make sure the date and time is correct on the console. If incorrect, you may be reporting old data, not real time data. 4. Make sure your time zone is set properly. If incorrect, you may be reporting old data, not real time data. 5. Check your router firewall settings. 6. Make sure the console is plugged into AC power. The console will not connect to WiFi when powered by batteries only. 7. The console only supports and connects to 2.4 GHz routers. If you own a 5 GHz router, and it is a dual band router, you will need to disable the 5 GHz band, and enable the 2.4 GHz band. |
7. Specifications
7.1. Measurement Specifications
| Measurement | Range.Accuracy.Resolution |
|---|---|
| Indoor Temperature | 0 to 60 °C/(32 to 140°F); ±1 °C/(±2°F); 0.1 °C(°F) |
| Outdoor Temperature | -40 to 60 °C/ (-40 to 140°F); ±1 °C/(±2°F); 0.1 °C(°F) |
| Indoor Humidity | 10 to 99 %; ± 5% (at 20 to 90%); 1% |
| Outdoor Humidity | 10 to 99 %; ±5% (at 20 to 90%); 1% |
| Sensors1-8 Temperature (016TH) | -40 to 60 °C/(-40 to 140°F); ±1°C |
| Sensors1-8 Humidity (016TH) | 10 to 99%; ±5% (at 20 to 90%); 1% |
| UV Index | 1 to 15+; ±1 |
| Sunlight | 0 to 200K lux; ±15% |
| Rain | 0 to 9999mm; <15mm:±7% (15mm~9999mm) |
| Wind Direction | 0 - 360°; ±10° (16 point compass); 1° |
| Wind Speed | 2m/s~10m/s; ±0.3m/s; 0.1m/s |
| Barometric Pressure | 300 to 1100hpa; ±3 hpa; 0.1 hpa |
7.2. Wireless Specifications
| Wireless Transmit Range (in open air) | 330ft (100m) |
| Frequency | 433MHz |
| Integrated Outdoor Sensor Data Update | 16s |
7.3. Power Consumption
| Display Console | 5.9V/500mA power adaptor (included) or 3 x AAA 1.5V Alkaline or Lithium batteries (not included) |
| Outdoor Sensor | 3xAA alkaline batteries or Lithium batteries (not included), the batteries provide backup power when there is limited solar energy. Note: Solar panel doesn't charge the battery and it is an auxiliary power supply. |
| Thermo-Hygrometer Sensor | 2 x AAA alkaline batteries or Lithium batteries (not included) |
7.4. WiFi Specifications
| WIFI Standard | 802.11 b/g/n |
| WiFi Console RF Frequency | 2.4 GHz |
| Device Compatibility | Built-in WiFi with WAP Mode, Smart Device (laptops, computers, smart phones and smart pads). |
| Web Browser Compatibility | HTML 5 (such as the latest versions of Chrome, Safari, IE, Edge, Firefox or Opera). |
| Line of sight WiFi RF transmission (in open air) | 80ft (20m). |
8. Warranty and Support
8.1. Warranty & Guarantee
- We offer 100% genuine original RuoShui (Victor) instruments.
- 1 Year warranty for all of our products. (Excluding item damaged and/or misused after receipt. Accessories come with 3-month warranty.)
- We will bear the shipping cost if the product is not as advertised, otherwise, the buyer shall pay the shipping cost.
- Defective items must be reported and returned within the warranty period (and in the original packaging, if possible).
8.2. Other Terms & Conditions
- If there is any problem with your order, please contact us first, we will try our best to give you the best solution. Please don't give negative feedback before contact us, that won't help to solve your problem.
- No battery will be sent with the product due to safety reasons.
- We are not responsible for any custom duty or import tax.
8.3. Technical Support
Our product is continuously changing and improving, particularly online services and associated applications. To download the latest manual and additional help, please contact our technical support team: support@nicetyweather.com
Manufacturer: UNIT CONNECTION TECHNOLOGY and STARMETER INSTRUMENTS, Building A1, United Industrial Park, Zhancheng Community, Fuhai Subdistrict, Bao'an District Shenzhen, China. Visit www.nicetyweather.com for more technical support and warranty regulations.
9. User Tips
- Remote Monitoring: Once your weather station is connected to Weather Underground or Weathercloud, you can access your real-time weather data and historical trends from anywhere using their respective websites or mobile applications.
- Wi-Fi Connectivity: Ensure your router is set to a 2.4 GHz band during the initial Wi-Fi setup, as the weather station does not support 5 GHz networks.
- Sensor Placement: For the most accurate readings, place the outdoor sensor in an open area, away from direct heat sources, buildings, and obstructions that could affect wind or rain measurements.
- Battery Life: For optimal performance and extended battery life, especially in colder climates, use lithium batteries for both the outdoor sensor and the thermo-hygrometer sensor.
- Data Review: Regularly check the 'Evolution' and 'Reports' sections on Weathercloud or Weather Underground to review historical data and identify long-term weather patterns.
10. Frequently Asked Questions (FAQ)
- Q: Can this weather station be linked to a phone app?
- A: Yes, once your weather station is connected to online weather services like Weather Underground or Weathercloud via Wi-Fi, you can access your weather data through their official mobile applications on your smartphone.
- Q: How do I connect the weather station to Wi-Fi?
- A: The Wi-Fi connection process involves plugging in the console, ensuring the Wi-Fi icon is flashing, connecting to the station's temporary Wi-Fi network from a computer, accessing its web interface via
http://192.168.5.1, and then entering your home Wi-Fi network details (2.4 GHz only) along with your Weather Underground or Weathercloud station ID and key. Detailed steps are provided in Section 3.6 of this manual.


