SMAEL 8040

Contents

SMAEL 8040 Fashion Sport Watch User Manual

Model: 8040

Introduction

This manual provides detailed instructions for the operation and maintenance of your SMAEL 8040 Fashion Sport Watch. Designed for durability and functionality, this watch features both analog and digital displays, making it suitable for various activities, from daily wear to sports and outdoor adventures. Please read this manual carefully to ensure proper use and to maximize the lifespan of your watch.

Features

  • Dual Display: Analog and Digital time display.
  • Timekeeping: 12-digit LCD display showing hour, minute, second, month, day, and week.
  • Calendar: Full auto calendar with 12/24-hour format selection.
  • Alarm: Daily alarm function.
  • Chime: Hourly chime.
  • Stopwatch: 1/100 second chronograph with split functions.
  • Backlight: EL (Electroluminescent) backlight for visibility in low light conditions.
  • Durability: Shock-resistant design.
  • Water Resistance: 50M (5 BAR) water resistance.
  • Materials: Wear-resistant plastic case with metal trim and a non-slip breathable silicone (PU rubber) strap.
Diagram illustrating nine key functions of the SMAEL 8040 watch: Movement, Stopwatch Timing, Alarm Clock, 12/24H, Weekly Calendar, LED Luminous, Soft Strap, Wear-Resisting, and 50M Waterproof.
Figure 1: Overview of the watch's nine main functions.

Setup Instructions

Refer to the diagram below for button identification:

Diagram of the watch face with buttons labeled: LIGHT (A), START/STOP (D), MODE (B), RESET (C). Also shows minute hand, hour hand, time settle location, crown, and second hand.
Figure 2: Watch button layout and display elements.

Time and Date Setting

  1. In Normal Time Display Mode, press the MODE (B) button three times to enter the setting mode. The 'Seconds' will start flashing.
  2. Press the START/STOP (D) button to reset the seconds to zero.
  3. Press the RESET (C) button to move to 'Hours' setting. The 'Hours' will flash.
  4. Press the START/STOP (D) button to adjust the hour. (This button also toggles between 12/24-hour format).
  5. Press the RESET (C) button to move to 'Minutes' setting. The 'Minutes' will flash.
  6. Press the START/STOP (D) button to adjust the minutes.
  7. Press the RESET (C) button to move to 'Month' setting. The 'Month' will flash.
  8. Press the START/STOP (D) button to adjust the month.
  9. Press the RESET (C) button to move to 'Date' setting. The 'Date' will flash.
  10. Press the START/STOP (D) button to adjust the date.
  11. Press the RESET (C) button to move to 'Week' setting. The 'Week' will flash.
  12. Press the START/STOP (D) button to adjust the day of the week.
  13. Press the MODE (B) button to exit the setting mode and return to normal time display.

Alarm Setting

  1. In Normal Time Display Mode, press the MODE (B) button twice to enter Alarm Mode.
  2. Press the RESET (C) button. The 'Hours' will flash.
  3. Press the START/STOP (D) button to adjust the alarm hour. Pay attention to AM/PM indication if using 12-hour format.
  4. Press the RESET (C) button. The 'Minutes' will flash.
  5. Press the START/STOP (D) button to adjust the alarm minutes.
  6. Press the MODE (B) button to exit the alarm setting mode.

Operating Instructions

Mode Conversion

To switch between different operational modes (Time, Chronograph, Alarm, Time Setting), press the MODE (B) button. Each press cycles through the modes in sequence.

Chronograph (Stopwatch) Functions

  1. In Normal Time Display Mode, press the MODE (B) button once to enter Chronograph Mode.
  2. Press the START/STOP (D) button to start the stopwatch.
  3. Press the START/STOP (D) button again to stop the stopwatch.
  4. To continue timing after stopping, press the RESET (C) button.
  5. To reset the stopwatch to zero, press the START/STOP (D) button to stop it, then press the RESET (C) button.

Alarm and Hourly Chime ON/OFF

  1. In Normal Time Display Mode, press the MODE (B) button twice to enter Alarm Mode.
  2. Press the START/STOP (D) button to toggle the alarm ON/OFF. When the alarm symbol (ALM) appears, the alarm is ON.
  3. To toggle the hourly chime ON/OFF, press the RESET (C) button. When the chime symbol (SIG) appears, the hourly chime is ON.

EL Backlight

At any mode, press the LIGHT (A) button to activate the EL backlight for approximately 3 seconds, illuminating the display for easy viewing in the dark.

The SMAEL 8040 watch display showing the LED luminous feature in a dark setting.
Figure 3: LED Luminous Display for night visibility.

Maintenance

  • Water Resistance: The watch is 50M water-resistant, suitable for daily use, showering, and swimming. However, do not press any buttons underwater, as this can compromise the water seal and cause damage.
  • Cleaning: Wipe the watch regularly with a soft, dry cloth to remove dirt and moisture. For the silicone strap, a mild soap solution and water can be used, followed by thorough rinsing and drying.
  • Avoid Chemicals: Do not expose the watch to strong chemicals, solvents, or detergents, as these can damage the case, strap, or internal components.
  • Temperature Extremes: Avoid exposing the watch to extreme temperatures (hot or cold) for prolonged periods, as this can affect battery life and accuracy.
  • Impact: While shock-resistant, avoid unnecessary impacts or drops to prevent damage to the watch's internal mechanism or exterior.
  • Battery Replacement: The watch includes a non-rechargeable battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have this done by a professional to ensure the water resistance seal is maintained.
The SMAEL 8040 watch with water droplets, emphasizing its 50M waterproof capability.
Figure 4: The watch is 50M waterproof for daily use.

Troubleshooting

Problem Possible Cause Solution
Digital display is dim or blank. Low battery. Replace the battery. Consult a professional watch repair service.
Watch is not keeping accurate time. Low battery; incorrect time setting. Replace the battery. Re-set the time and date following the instructions in this manual.
Water inside the watch. Buttons pressed underwater; damaged seal. Immediately take the watch to a professional for inspection and repair. Avoid further water exposure.
Alarm does not sound. Alarm is turned off; incorrect alarm time set. Ensure the alarm is turned ON (ALM symbol visible). Verify the alarm time is set correctly.
Analog hands are not moving or incorrect. Analog movement issue; battery issue. The analog display is typically synchronized with the digital time. If the analog hands are incorrect, try resetting the digital time. If the issue persists, professional service may be required.

Specifications

Attribute Detail
Brand NameSMAEL
Model Number8040
Item TypeDigital Wristwatches
Display TypeAnalog-Digital
MovementDigital (Electronics)
Water Resistance Depth5Bar (50M)
Case MaterialAcrylic
Case ShapeRound
Case Thickness22mm
Dial Diameter26mm
Dial Window Material TypeAcrylic
Band Material TypePU (Rubber)
Band Width18mm
Band Length8.66 inches (Wearing Range: 140mm-230mm)
Clasp TypeBuckle
Weight72g
StyleSPORT
FeatureLed Display, Shock Resistant
Battery IncludedYes
Rechargeable Battery IncludedNo
Boxes & Cases MaterialNo package
Voltage<36V
WirelessN
High-concerned chemicalNone
Diagram showing the overall length of the watch at 260mm and a guide for measuring wrist size. The wearing range is 140mm-230mm.
Figure 5: Watch dimensions and wrist measurement guide.

User Tips

  • Analog Functionality: The analog display on the watch is fully functional and works in conjunction with the digital time.
  • Strap Replacement: If you need to replace the watch strap, ensure you purchase one compatible with SMAEL 8040 models to ensure proper fit and function.
  • Water Resistance Reminder: Always remember the critical instruction: Do not press any buttons while the watch is submerged in water, even if it's within its rated water resistance depth. This is the most common cause of water damage.

Warranty and Support

For any issues not covered in this manual, or for warranty claims, please contact the seller or an authorized service center. Keep your purchase receipt as proof of purchase. A PDF version of the user manual is available for download from the product page for your convenience.

PDF Manual: A detailed user manual in PDF format can be found at SMAEL 8040 User Manual (PDF).

Product Video

Video 1: A short demonstration of the SMAEL 8040 watch features and various color options.

© 2023 SMAEL. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.