1. Introduction
Thank you for choosing the TYT MD-9600 Digital Mobile Radio. This product features a newly developed function menu and user-friendly operation design, making it easy to use. It offers a compact size and reliable performance for your communication needs.
The TYT MD-9600 digital radio utilizes the Digital Mobile Radio (DMR) Tier 2 Standard protocol. It is compatible with popular MOTOTRBO series radios using standard encryption, as well as other DMR-supported radios. It also supports existing analog two-way radio operations on UHF and VHF frequencies, facilitating an easy migration to digital technology.
2. Package Contents
Please check the box for the following items:
- 1 x TYT MD-9600 Digital Mobile Radio (GPS Optional)
- 1 x Speaker Microphone
- 1 x Screw Sets
- 2 x Spare Fuses
- 1 x User Manual (this document)
- 1 x Mounting Bracket
- 1 x Programming Cable
- 1 x Power Supply Cable
3. Product Overview
3.1 Radio Controls and Indicators
- ON/OFF Button: Powers the radio on or off.
- Volume Knob: Adjusts audio output level.
- Channel Knob: Selects channels.
- ENT (Enter) Button: Confirms selections or enters menus.
- Up/Down Buttons: Navigates menus or adjusts values.
- P1-P4 Side Keys: Programmable function keys.
- BAND/ESC Switch/ESC Button: Switches bands or exits menus.
- MIC Port: Connects the speaker microphone.
3.2 Speaker Microphone Controls
- PTT (Push-To-Talk) Button: Press to transmit, release to receive.
- MIC: Microphone for speaking.
- Number Keypad: For inputting channel numbers, DTMF dialing, etc.
- Indicate Light: Illuminates red during transmission.
- A/B Button: Exchanges between home screen and sub-screen.
- Up/Down Arrows: Decreases/increases volume or setting values.
3.3 Rear Panel Connections
- Antenna Connector: Connects to the external antenna.
- Programming Cable Port: Connects to the programming cable for software configuration.
- Power Supply Cable Port: Connects to the 13.8V DC power source.
4. Setup
4.1 Initial Power On
- Ensure the radio is securely mounted using the provided mounting bracket.
- Connect the power supply cable to a stable 13.8V DC power source.
- Connect a suitable antenna to the antenna connector on the rear panel.
- Press and hold the ON/OFF button for 1 second. The LED indicator will light up, and the screen will display the boot picture.
- If Tone/Alerts are forbidden, there will be no sound upon power-on. To power off, press and hold the ON/OFF button for 2 seconds.
4.2 Adjusting Volume
Rotate the Volume Knob clockwise to increase the volume or counter-clockwise to decrease it.
4.3 Programming Side Keys
The P1, P2, P3, and P4 side keys can be programmed via software for various functions, including:
- None-function
- All warning tone on/OFF
- Emergency ON/OFF
- High/Low Power
- Monitor
- One Touch Access (multiple options)
- Repeater/Talk around
- Scan ON/OFF
- Privacy ON/OFF
- VOX ON/OFF
- Zone Select
- Record ON/OFF / Playback / Replay
- Delete All record
- 1750Hz
5. Operating Instructions
5.1 Zone Selection
A Zone is a group of channels. The radio supports up to 250 Zones, with a maximum of 64 channels per Zone.
- Press the ENT or MENU key to enter the menu.
- Use the Up or Down key to select 'Zone Selection', then press ENT or MENU to confirm.
- The screen will display the chosen zone and its name.
- Use the Up or Down key to select the desired Zone, then press ENT or MENU to confirm.
5.2 ID Selection (Channels, User ID, Group ID)
To select a channel, user's name/ID, or group name/ID, rotate the channel knob to navigate through the available options within the selected Zone.
5.3 Launching and Receiving Calls
5.3.1 Group Call
The radio must be part of a group to receive group calls.
Receiving a Group Call:
- The LED indicator will light up.
- The top of the screen will show the RSSI mark. The first line displays the group name, the middle line shows the incoming call ID, and the last line displays the group call ICON (digital mode only).
- Hold the microphone 2.5-3cm from your lips.
- Press the PTT key to answer the call.
- Release the PTT key to receive. If there is no voice activity, the call ends.
Making a Group Call:
- Turn the channel knob to select the desired group name or ID.
- Hold the microphone 2.5-3cm from your lips.
- Press the PTT key to initiate the call. The screen will show the group name or ID with a Group mark.
- Release the PTT key to receive. If the target radio replies, the screen will show the group mark or name/ID.
- If no transmission is detected within the time limit, the call will fail.
5.3.2 Single Call
A single call is a one-on-one communication, used for testing radio presence or direct calls.
Receiving a Single Call:
- The LED indicator will light up.
- The top of the screen will show the RSSI mark. The first line displays the group name, the middle line shows the incoming call ID, and the last line displays the group call ICON (digital mode only).
- Hold the microphone 2.5-3cm from your lips.
- Press the PTT key to answer the call.
- Release the PTT key to receive.
Making a Single Call:
- Turn the channel knob to select the desired user's name or ID.
- Hold the microphone 2.5-3cm from your lips.
- Press the PTT key to initiate the call. The screen will show the Alias or ID and the Single Call ICON.
- Release the PTT key to receive. If the target radio replies, the screen will show the ID.
5.3.3 All Call
An All Call broadcasts information to all users on a channel. Users cannot reply to an All Call.
Receiving an All Call:
- The LED indicator will light up.
- The top of the screen will show the RSSI mark. The first line displays the group name, the middle line shows the incoming call ID, and the last line displays the group call ICON (digital mode only).
- After the All Call ends, the radio returns to the receive screen. If the 'FREE CHANNEL MESSAGE SOUND' function is active, you will hear a message sound indicating the channel is free, but you cannot reply.
Making an All Call:
- Turn the channel knob to select the desired group name or ID.
- Hold the microphone 2.5-3cm from your lips.
- Press the PTT key to initiate the call. The screen will show the group name or ID with a Group mark.
5.4 Emergency Function
The emergency function is used to signal urgent situations, even if the radio is busy transmitting or receiving. The MD-9600 supports three types of emergency calls: Emergency Alarm, Emergency Alarm and Call, and Emergency Alarm and Voice.
5.4.1 Receiving an Emergency Call
- Upon receiving an emergency call, the screen will display the sender's name or ID, along with the number of emergency calls and alarms received.
- An alarm sound will activate, and the LED indicator will flash.
- If activated, the radio will automatically confirm the emergency alarm. The screen will show an emergency alarm warning mark until a confirmation message is sent, allowing you to log out. During this time, you will not receive other calls or notices.
5.4.2 Replying to an Emergency Call
- Press any key to stop the emergency call alarm.
- Hold the microphone 2.5-3cm from your lips. If 'FREE CHANNEL MESSAGE SOUND' is active, you will hear a message sound.
- Press the PTT key to make a call. The radio will be in emergency call mode.
- Release the PTT key. When replying, the screen shows the group mark or ID and call ID.
- After the call, short press ESC, then press the pre-programmed emergency key to turn off, delete all emergency calls, and log out.
5.5 Message Function
The radio can send and receive text messages. It supports up to 50 pre-programmed quick text messages.
5.5.1 Sending a Quick Text Message
- Press MENU to enter the menu.
- Navigate to 'Messages' using Up/Down, then press MENU.
- Select 'Quick Text' using Up/Down, then press MENU.
- Choose the desired quick text message using Up/Down, then press MENU.
- A flashing cursor appears. You can edit the message using the keypad.
- After editing, press MENU to send or save.
- Select the recipient (alias or ID) using Up/Down, then press MENU.
5.5.2 Receiving and Checking SMS
When receiving an SMS, the sender's alias or ID and text message will appear on the screen. You can choose to read, read later, or delete the message.
- Press MENU to enter the menu.
- Navigate to 'Messages' using Up/Down, then press MENU.
- Select 'Inbox' using Up/Down, then press MENU.
- Select 'Read' using Up/Down, then press MENU to view the message.
5.6 Scanning
The radio supports scanning pre-programmed scan lists to detect active channels or contact groups.
5.6.1 Starting/Stopping Scan
- Use the channel knob to select a channel with a pre-programmed scan list.
- Press MENU to enter the menu.
- Navigate to 'Scan' using Up/Down, then press MENU.
- If scanning is disabled, the screen displays 'ON'. If enabled, it displays 'OFF'. Press MENU to toggle.
- When scanning is active, the LED indicator flashes red, and the scan icon appears on the screen.
5.7 Utilities (Radio Settings)
Access various radio settings through the Utilities menu.
- Press MENU to enter the menu.
- Navigate to 'Utilities' using Up/Down, then press MENU.
- Select 'Radio Settings' using Up/Down, then press MENU.
Sub-settings include:
- Talkaround: Allows direct radio-to-radio communication when a repeater is unavailable or out of range.
- Tones/Alerts: Configures audible tones and alerts (e.g., keypad tones, call admission tone).
- Power: Adjusts transmit power level (High/Low).
- Backlight: Sets screen and keypad backlight duration or always-on.
- Squelch: Adjusts the radio's squelch level to filter out noise.
- Intro Screen: Enables/disables the boot screen display.
- Keypad Lock: Locks the keypad to prevent accidental input.
- LED Indicator: Activates/deactivates the LED indicator.
- VOX: Voice-activated transmission for hands-free operation.
- Passwd Lock: Sets a power-on password for the radio.
- Record: Enables/disables call recording (digital mode only) and playback.
- Clock: Sets the radio's time and date.
- Mode: Selects between Channel Mode (CH Mode) and Memory Mode (MR Mode).
- Private Call Match / Group Call Match: Allows direct communication without ID matching if enabled.
5.8 Encryption
The radio supports encryption (Digital Mode Only) to prevent unauthorized eavesdropping. Basic encryption requires all radios in the communication to have the same encryption keys.
5.9 DTMF
Dual Tone Multi-Frequency (DTMF) function helps operate the radio in environments with interference. To initiate a DTMF call, press and hold the PTT key and enter the desired number.
5.10 Radio Info
Access information about your radio, including 'My Number' (radio ID) and 'Versions' (firmware version).
5.11 Program Radio
This menu allows editing of channel contents such as RX/TX Frequency, Channel Name, Time Out Timer (TOT), CTCSS/DCS, Color Code, and Repeater Slot. Access requires a programming password set via software.
6. Maintenance
6.1 General Care
- Keep the radio dry. If it gets wet, wipe it immediately.
- Do not expose the radio to extreme temperatures.
- Avoid strong shocks or vibrations.
- Clean the radio's surface with a soft, damp cloth. Do not use harsh chemicals or solvents.
- Ensure all connectors (antenna, power, microphone) are clean and free of debris.
6.2 High-Temperature Surface Warning
Note: The rear surface of the radio can become hot after long-term use. Do not touch it directly to avoid burns.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on. | Loose power cable connection; no power from source; faulty power cable. | Check power cable connection; verify power source; try a different power cable. |
| No audio output. | Volume too low; squelch level too high; speaker microphone not connected properly. | Increase volume; adjust squelch level; re-connect speaker microphone. |
| Cannot transmit or receive. | Incorrect frequency/channel; antenna not connected; low power setting; radio disabled. | Verify frequency/channel settings; check antenna connection; set power to High; check radio disable status. |
| Poor audio quality (noise/static). | Weak signal; high interference; incorrect squelch setting. | Move to an area with better signal; adjust squelch level; check antenna. |
| Keypad is locked. | Keypad lock function is active. | Press MENU then # to unlock the keypad. |
8. Specifications
8.1 General Specifications
| Parameter | Value |
|---|---|
| Frequency Range | VHF: 136-174 MHz, UHF: 400-480 MHz |
| Rated Input Voltage | 13.8V DC ±15% |
| Channel Capacity | 3000 Channels |
| Zone Capacity | 250 Zones (64 channels per zone) |
| DMR ID Capacity | 10000 |
| Output Power | High: 50W VHF & 45W UHF, Low: 25W |
| CTCSS/CDCSS | 50 CTCSS / 105 CDCSS |
| Digital Protocol | ETSI TS 102 361-1-2-3 (TDMA) |
| Digital Vocoder Type | AMBE++ |
| Operating Temperature | -30°C to +60°C |
| Dimensions | 145mm x 140mm x 50mm |
| Net Weight | About 900g (2.2KG package weight) |
| FCC ID | POD-DMR3 |
8.2 Transmitter Specifications
| Parameter | VHF (12.5kHz) | UHF (25kHz) |
|---|---|---|
| FM Hum and Noise | -40dB | -45dB |
| Modulation Limited | ±2.5kHz | ±5.0kHz |
| Conducted/Radiated Emission | -36 dBm < 1GHz | -30 dBm > 1GHz |
| Adjacent Channel Power | -60 dB | -65 dB |
| Audio Response | +1dB ~ -3dB | |
| Audio Distortion | 3% | |
| FM Modulation | 11K0F3E | 16K0F3E |
| 4FSK Digital Modulation | 12.5kHz data: 7K60FXD, 12.5kHz data and audio: 7K60FXE | |
8.3 Receiver Specifications
| Parameter | Value |
|---|---|
| Frequency Stability | ±1.0ppm (-20°C to +60°C) |
| Digital Sensitivity | 0.3uV/-117.4dBm (BER 5%), 0.7uV/-110dBm (BER 1%) |
| Analogue Sensitivity | 0.35uV/-116dBm (20dB SINAD), 0.22uV/-120dBm (20dB SINAD) |
| Rated Audio | 5W |
| Adjacent Channel Selectivity | TIA603C: 60 dB (12.5kHz), ETSI: 60 dB (12.5kHz) |
| Intermodulation | TIA603C: 65 dB, ETSI: 65 dB |
| Co-channel Rejection | 12 dB (12.5kHz) |
| Spurious Rejection | TIA603C: 70 dB, ETSI: 70 dB |
| Audio Distortion @ Rated Audio | ≤3% |
| FM Hum and Noise | -40dB (12.5kHz), -45dB (25kHz) |
| Audio Response | +1dB ~ -3dB |
| Spurious Emission | -57dBm (<1GHz), -47dBm (>1GHz) |
| Block | 84dB |
9. User Tips
- Firmware Compatibility: Some users inquire about compatibility with alternative firmware like Open GD77. Please note that using unofficial firmware may void your warranty and could lead to unexpected behavior or damage to the device. Always refer to official TYT resources for firmware updates.
- GPS Functionality: The GPS feature allows you to view longitude and latitude via the manufacturer-provided programming software. The manufacturer does not guarantee compatibility with third-party cellphone software for position checking, as this is beyond the intended function design.
- Programming Cable: The included programming cable is essential for configuring advanced settings and channels via computer software. Ensure you use the correct software version for your radio model.
10. Warranty and Support
10.1 Warranty Information
The product warranty period begins from the purchase date. If a product failure occurs under normal use within the warranty period, service will be provided according to the terms below:
- Radio Unit: 12 months warranty.
- Accessories: 6 months warranty.
To claim warranty service, please present the original warranty card and purchase invoice to a designated authorized warranty repair station.
10.2 Conditions for Paid Service
The following situations will result in paid service, even within the warranty period:
- Failure to produce the warranty card.
- Altered or inconsistent information on the warranty card.
- Defects or damage caused by abnormal or non-normal use.
- Defects or damage caused by misuse, accident, water damage, or negligence.
- Defects or damage caused by improper testing, operation, maintenance, installation, disassembly, or adjustment.
- Defects or damage caused by unauthorized repair or disassembly.
- Defects or damage caused by force majeure.
- Wear and tear under normal use.
10.3 Technical Support
For technical assistance, firmware updates, or programming software, please refer to the official TYT website or contact your authorized dealer. When seeking repair, send the radio, warranty card, and purchase invoice to a designated service station. Shipping costs for repairs are typically borne by the user.