HGLRC DS230 Drone Soccer

Contents

HGLRC DS230 Drone Soccer Instruction Manual

Model: DS230 Drone Soccer | Brand: HGLRC

1. Introduction

The HGLRC DS230 Drone Soccer is a versatile FPV quadcopter designed for both freestyle flying and drone soccer games. Featuring an all-round protective spherical frame, it is built for durability and impact resistance. This manual provides essential information for the safe and effective operation, setup, and maintenance of your DS230 Drone Soccer.

HGLRC DS230 Drone Soccer with all-round protection
Figure 1: HGLRC DS230 Drone Soccer with all-round protection.

2. Safety Information

WARNING: Not suitable for children under 36 months due to small parts. Minors please use under the supervision of an adult.

  • Always operate the drone in open areas, away from people, animals, and obstacles.
  • Ensure the battery is fully charged before each flight.
  • Do not operate the drone in strong winds or adverse weather conditions.
  • Keep fingers and loose clothing away from propellers when the drone is powered on.
  • Never attempt to modify the drone's components unless explicitly instructed.
  • Always turn off the drone and disconnect the battery after use.

3. Package Contents

Please verify that all items are present in your package:

  • 1x Zeus F722 mini flight controller (270)
  • 1x Zeus 28A BL_S ESC
  • 1x DS230 Frame (Orange / Yellow / Gray, color may vary based on selection)
  • 4x AEOLUS 1404 4800KV Motor
  • 8x Gemfan3016 -PC 3 inch 3 blade propeller (4 CW & 4 CCW)
  • 1x Receiver (optional, depending on version purchased)
  • Original Box
  • Integrated Camera (FPV Capable)
Detailed overview of HGLRC DS230 Drone Soccer features, specifications, and package contents
Figure 2: Detailed product overview including features, specifications, and package contents.

4. Specifications

Component/FeatureDetail
Product NameHGLRC DS230 Standard Version
Drone Weight163.9g (Standard Version)
Takeoff Weight150g
Frame Type3-inch frame
Wheelbase126mm
Frame Size230 x 230 x 220mm
MaterialMetal, Plastic, Carbon Fiber
Flight ControllerZeus F722 mini (Gyro: BMI270, Firmware: HGLRCF722)
ESCZeus 28A BL_S (Continuous: 28A, Peak: 35A, Firmware: BLS-F-H-40)
MotorAEOLUS 1404 4800KV Brushless Motor
PropellersGemfan3016 -PC 3 inch 3 blade
Input Voltage (FC/ESC)3-6S Lipo
Input Voltage (Motor)3-4S
BEC Output9V1.5A / 5V2A
Recommended Battery3S: 850mAh
Plugs TypeXT30
Charging Voltage14.8V
Charging TimeApproximately 30 minutes
Flight Time<5 minutes (Note: Actual flight time may vary based on flying style and battery condition)
Remote Distance100 meters
Control Channels8 CHANNELS
Controller ModeMODE1, MODE2 (User selectable)
Video Capture Resolution720P HD
Operator Skill LevelBeginner, Intermediate, Expert
Indoor/Outdoor UseIndoor-Outdoor
State of AssemblyReady-to-Go
Recommended Age14+ years
CertificationCE
Comparison of HGLRC DS230 Standard Version and FPV Version weights
Figure 3: Weight comparison between Standard and FPV versions.

5. Setup

5.1. Unpacking and Inspection

Carefully remove all components from the packaging. Inspect for any signs of damage during transit. If any parts are missing or damaged, contact customer support immediately.

5.2. Battery Installation and Charging

  1. Ensure the drone is powered off.
  2. Connect the recommended 3S 850mAh LiPo battery (not included) to the XT30 plug on the drone.
  3. Use a compatible LiPo charger (not included) to charge the battery. The charging voltage is 14.8V, and charging time is approximately 30 minutes. Always follow the charger's instructions and safety guidelines for LiPo batteries.

5.3. Propeller Installation

The drone comes with 8 propellers (4 CW and 4 CCW). Ensure you install the correct rotation propellers on the corresponding motors. Typically, propellers are marked for their rotation (CW/CCW) and should match the motor's rotation direction. Incorrect installation will prevent the drone from flying correctly.

5.4. Receiver Binding (if applicable)

If your package includes a receiver, you will need to bind it to your remote control. Refer to the specific instructions provided with your receiver and remote control for the binding process. The DS230 supports Controller Modes MODE1 and MODE2.

6. Operating Instructions

6.1. Pre-Flight Checklist

  • Ensure the drone battery is fully charged and securely connected.
  • Verify that the remote control battery is charged (controller battery not included).
  • Check all propellers for damage and ensure they are securely attached.
  • Perform a visual inspection of the drone for any loose wires or components.
  • Choose an open, safe flying area, clear of people, animals, and obstacles.

6.2. Powering On

  1. Place the drone on a flat, level surface.
  2. Power on your remote control first.
  3. Connect the battery to the drone. The drone's LED lights will illuminate, indicating it is powering on and initializing.
  4. Wait for the drone to establish a connection with the remote control (LEDs may change color or stop blinking).

6.3. Takeoff and Flight

  • Arming Motors: Refer to your remote control's manual for the specific stick combination to arm the motors. Typically, this involves moving both sticks to the bottom-in or bottom-out corners.
  • Takeoff: Slowly increase the throttle (left stick for Mode 2) to lift the drone off the ground.
  • Controlling Flight: Use the left stick for throttle (altitude) and yaw (rotation). Use the right stick for pitch (forward/backward) and roll (left/right).
  • Multi-color LED Lights: The drone supports multi-color LED light strip adjustment, which can be used to quickly identify your drone in multiplayer drone soccer games.
HGLRC DS230 Drone Soccer Standard Version with green LED lights
Figure 4: DS230 Drone Soccer with green LED lights activated.
HGLRC DS230 Drone Soccer with red LED lights
Figure 5: DS230 Drone Soccer with red LED lights activated.

6.4. Landing

Slowly decrease the throttle until the drone gently lands. Once landed, disarm the motors using the appropriate stick combination on your remote control.

6.5. Powering Off

  1. Disarm the motors.
  2. Disconnect the battery from the drone.
  3. Power off your remote control.

7. Maintenance

  • Cleaning: Regularly clean the drone's frame and components with a soft, dry cloth. Avoid using water or harsh chemicals.
  • Propeller Inspection: Before and after each flight, inspect propellers for cracks, bends, or chips. Replace any damaged propellers immediately.
  • Frame Inspection: The spherical explosion-proof material frame is designed for impact resistance. However, after significant crashes, inspect the frame for any structural damage.
  • Motor Care: Keep motors free from dirt, dust, and debris. Avoid prolonged exposure to moisture.
  • Battery Storage: Store LiPo batteries in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store fully charged or fully discharged for extended periods.

8. Troubleshooting

ProblemPossible CauseSolution
Drone does not power onBattery not connected or dischargedEnsure battery is connected correctly and fully charged.
Motors do not armRemote control not bound, safety switch engaged, or incorrect stick commandBind receiver to remote control. Check remote control manual for arming sequence.
Drone drifts during flightCalibration issue, unbalanced propellers, or wind interferenceRecalibrate the flight controller. Check and replace damaged propellers. Fly in calm conditions.
Short flight timeBattery degradation, cold weather, or aggressive flyingEnsure battery is healthy. Fly in moderate temperatures. Adopt a smoother flying style.
Loss of control/signalOut of range, interference, or receiver issueFly within the 100-meter remote distance. Avoid areas with strong electromagnetic interference. Re-bind receiver if necessary.

9. User Tips

  • Practice in a Simulator: If you are new to FPV drones, consider practicing with a simulator before flying your physical drone to build muscle memory and reduce the risk of crashes.
  • Battery Management: Always allow LiPo batteries to cool down before recharging. Avoid completely draining the battery, as this can shorten its lifespan.
  • Propeller Spares: Keep spare propellers on hand, as they are often the first components to be damaged in a crash.
  • LED Customization: Utilize the multi-color LED light strip adjustment feature for better visibility and team identification during drone soccer games.

Note: No specific user tips or FAQs were available from customer reviews or Q&A for this product. The tips provided are general recommendations for drone users.

10. Warranty and Support

This product does not explicitly include a warranty as per the provided specifications. For any technical issues, troubleshooting assistance, or inquiries regarding your HGLRC DS230 Drone Soccer, please contact the seller or manufacturer directly. Keep your purchase records for reference.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.