1. Introduction
Thank you for choosing the feyree Portable EV Charger. This manual provides essential information for the safe and efficient operation of your new electric vehicle charger. Please read this manual thoroughly before use and keep it for future reference.
This portable EV charger is designed for convenient and flexible charging of electric vehicles, featuring Wi-Fi and Bluetooth connectivity for smart app control, adjustable current settings, and robust safety protections.

Figure 1: feyree Portable EV Charger with App Interface
2. Safety Warnings and Precautions
Failure to follow these instructions may result in electric shock, fire, or serious injury.
2.1. General Warnings
- Avoid immersing the AC charging connection device in water.
- Do not step on, pull, bend, or knot the charging cable.
- Do not insert foreign objects into any part of the charging vehicle connector.
- Refrain from dropping the control box or placing heavy objects on its surface.
- Do not install or use the charger near flammable, explosive, harsh, or combustible materials, chemicals, or vapors.
- Ensure the operating ambient temperature of the equipment remains within the range of -30 °C to +55 °C.
- Do not use the charger when you, the vehicle, or the charger is exposed to severe rain.
- Do not use the charger if it is defective, appears cracked, frayed, broken, otherwise damaged, or fails to operate.
- Do not use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other indication of damage.
- Do not attempt to open, disassemble, repair, tamper with, or modify the charger. Refer servicing to qualified service personnel.
- This product is exclusively designed for electric vehicle charging purposes.
- Avoid using external wires or adapters.
- This product must be well-grounded when used.
- Never insert your fingers into the charging plug.
- The EV charger is not user serviceable. Contact customer support for any repairs.
- If the device fails to charge normally as per the operation manual, please contact the seller or consider a replacement.
- Never allow children to play with the charger cable.
- To avoid the risk of fire or electric shock, do not use this device with an extension cord.
- Using a worn or damaged AC outlet may cause burns or start a fire.
- Risk of explosion. This equipment has arc or sparking parts that should not be exposed to flammable vapors.
- Risk of electric shock. Do not remove the cover or attempt to open the enclosure of the charger unit. No user-serviceable parts inside.
2.2. Precautions Before Charging
- Electrical Outlets: It is recommended that electrical outlets for your charger should be installed by a licensed and qualified electrician. Installation must comply with local codes.
- Grounding: This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to help reduce the risk of electric shock.
- Compatibility: Ensure the power plug and socket are compatible before initiating the charging process.
- Socket Condition: Do not charge if the socket is damaged, rusty, cracked, or has a loose connection. In case the socket is dirty or wet, disconnect the power supply first. Wipe the charging plug with a dry and clean cloth to ensure it is dry and free from any debris.
- Component Inspection: Verify that the charging connector, cable, control box, and plug surface are in good condition without any scratches, rust, breaks, or damages.
3. Product Overview
The feyree Portable EV Charger offers a smart and safe charging solution for your electric vehicle.
3.1. Key Features
- Wi-Fi Smart APP Control: Real-time monitoring, schedule charging, and remote control.
- Adjustable Current: 8A-10A-13A-16A settings.
- Safety Protections: TypeB AC30mA + DC6mA RCD, over-voltage, over-current, temperature, leakage, short circuit, grounding, waterproof, overload protection.
- LCD Screen: 2.8-inch display showing charging status, current, voltage, power, and time.
- Cable Length: 5 meters.
- CEE Plug: Available in different types (e.g., Model A, Model B).

Figure 2: Key Features of the feyree EV Charger
3.2. Control Box and LCD Display
The control box features a 2.8-inch LCD screen and three buttons for interaction:
- Button A: Adjust Current (also used for downward navigation in menus).
- Button D: Set Delay Time (also used for entering menu options).
- Button T: Set Charging Time (short press). Long press for 10 seconds to enter the settings page (also used for back navigation in menus).

Figure 3: Smart LCD and Button Functions
The LCD displays real-time information such as:
- Real-time Temperature
- Charging Status
- Charging Voltage (L1, L2, L3 for 3-phase)
- Charging Current
- Real-time Power
- Power Consumption
- Set Delayed Charging Time
- Set Charging Time
- Charging Duration / Delay Charging Countdown
- Wi-Fi State (Connection waiting, Connected, Not connected)

Figure 4: Scheduled Charging Example
3.3. Materials and Construction
- Cable: 99.95% Pure Copper for stable current.
- Insulation: Durable and flexible TPU.
- Charging Pin: 5μ silver-plated for better conductivity.
- PCB: 100% NO TIN PCB, in line with environmental standards.

Figure 5: High-Quality Materials
4. Specifications
Below are the detailed technical specifications for the feyree Portable EV Charger.
4.1. General Specifications
| Attribute | Value |
|---|---|
| Brand Name | feyree |
| Charger Type | Portable Charger |
| Power | 11KW Max |
| Current | 8A-10A-13A-16A Adjustable |
| Number of phases | 3 phase |
| Type | Type 2 |
| Voltage | 380V (for 3-phase) |
| Cable Length | 5m |
| Operating Temperature | -30 ~ 55 °C |
| IP Rating | IP66 (Charger Plug & Box) |
| RCD | TypeB AC30mA + DC6mA |
| Material | Copper alloy, silver plating |
| Weight | 3KG |
| Dimensions (Control Box) | Length: 227mm, Width: 100mm, Height: 56.5mm |
4.2. Detailed Charging Box Specifications (TYPE2)
| Power Rating | 7.6KW | 11KW | 22KW |
|---|---|---|---|
| APP | ● | ● | ● |
| Leakage protection | TypeB AC 30mA+DC 6mA | ||
| Power supply system | Single Phase | Three Phase | Three Phase |
| Rated voltage | 85V-264V | 380V±20% | 380V±20% |
| Rated current | 8-10-13-16-20-25-32A | 8-10-13-16A | 8-10-13-16-20-25-32A |
| Input Frequency | 50Hz/60Hz | 50Hz/60Hz | 50Hz/60Hz |
| Charger Plug | IP66 | IP66 | IP66 |
| Charger Box | IP66 | IP66 | IP66 |
| Working temperature | -30°C ~ +55°C | -30°C ~ +55°C | -30°C ~ +55°C |
| Storage temperature | -40°C ~ +80°C | -40°C ~ +80°C | -40°C ~ +80°C |
| Standby power | <3W | <3W | <3W |
| Working humidity | 5%~95% non-condensation | 5%~95% non-condensation | 5%~95% non-condensation |
| Cable Specification | 3G 6mm²+1*0.5mm² | 5G 2.5mm²+1*0.5mm² | 5G 6mm²+1*0.5mm² |

Figure 6: Control Box Dimensions
For a complete list of specifications including GBT, TYPE1, and TS-NACS variants, please refer to the official user manual PDF: feyree Portable EV Charger User Manual (PDF).
5. Setup and Initial Connection
Follow these steps to set up and connect your feyree Portable EV Charger.
5.1. Pre-Installation Check
- Ensure the electrical outlet is properly installed and grounded by a qualified electrician.
- Inspect the charger, cable, and connectors for any damage.
- Confirm the power plug and vehicle's charging port are compatible.
5.2. Connecting the Charger
- Adjust Current (Optional): Tap button "A" on the control box to adjust the charging current before plugging into the vehicle. The charging current set should not be higher than the supply current to avoid safety hazards. The current will be memorized automatically after setting.
- Plug into EV: Connect the charging plug to your electric vehicle's charging port. Ensure a secure connection.
- Power On: Plug the CEE plug into the appropriate power outlet. The charger will initiate the charging process.

Figure 7: Adjustable Current Settings
6. Operating Instructions
6.1. Basic Charging Operation
- Once connected, the charger will begin charging. The LCD screen will display real-time charging status.
- The charger will automatically stop charging when the car battery is fully charged, protecting the car's battery.

Figure 8: Automatic Stop Charging
6.2. Ending a Charging Session
There are several ways to end a charging session:
- Automatic Stop: The charger automatically stops when the car is fully charged. You can then directly unplug the charger.
- Power Switch: Turn off the power switch of the outlet to end charging, then unplug the charger.
- Vehicle Control: Use the stop charging button or switch in your electric vehicle. Then unplug the charger plug.
- App Control: Click "Stop charging" in the mobile app, then pull out the charger plug.
WARNING: Do not unplug the charger from the vehicle or power source while charging is active without first stopping the charging session through one of the methods above.
6.3. Smart App Control (Tuya Smart / Smart Life)
The feyree EV Charger can be controlled via the "Tuya Smart" or "Smart Life" app. This allows for remote monitoring, scheduling, and current adjustment.
6.3.1. App Download and Setup
- Download App: Download the "Tuya Smart" or "Smart Life" app from your mobile phone's app store.
- Add Device: Open the app, turn on your phone's Wi-Fi and Bluetooth. Select "Add Device" and follow the on-screen instructions to connect your charger. You need to connect under a Wi-Fi environment for initial setup.

Figure 9: App Download QR Codes
6.3.2. App Functions
- Real-time Monitoring: View charging status, voltage, current, power, and energy consumption.
- Remote Control: Start/stop charging remotely.
- Delay/Timed Charging: Set specific times for charging to start or stop, ideal for off-peak electricity rates.
- Current Adjustment: Adjust the charging current (8A-16A) via the app.

Figure 10: App Remote Control Features

Figure 11: Setting Up Charging Periods via App
6.3.3. Bluetooth Control (Without Wi-Fi)
The app can also be used to control the charger via Bluetooth within a 10-meter range, even without a Wi-Fi connection. Connect your phone and charger by hotspot the first time, then you can control the charger by app through Bluetooth.

Figure 12: Bluetooth Control Functionality
6.4. Menu Navigation (Control Box)
Long press the 'T' button for 10 seconds to enter the menu page. Use 'A' to navigate downward and 'D' to enter/confirm.

Figure 13: Query Device Information
Menu options include:
- Charge Plan: View or set charging schedules.
- Charge Log: Review past charging sessions.
- Settings: Adjust various parameters.
- About Device: View device information (Type, RCD, CP, Sum, Times, Duration, HV, SV).
7. Maintenance
To ensure the longevity and safe operation of your feyree Portable EV Charger, follow these maintenance guidelines:
- Regular Cleaning: Keep the charger, cable, and connectors clean and free from dust, dirt, and moisture. Use a dry, clean cloth for wiping.
- Cable Inspection: Periodically inspect the charging cable for any signs of wear, cuts, fraying, or damage. Do not use a damaged cable.
- Connector Care: Ensure the charging pins are clean and free from debris. Avoid bending or forcing the connectors.
- Storage: When not in use, store the charger in a dry, cool place, away from direct sunlight and extreme temperatures. Use the provided carrying bag for protection.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or solvents on the charger.
8. Troubleshooting
This section provides solutions to common issues you might encounter with your feyree Portable EV Charger.
8.1. Common Error Messages and Solutions
| Fault Name | Reason for Failure | Recommendations |
|---|---|---|
| Over Voltage | AC input voltage is too high | 1. Ask an electrician to measure the input voltage. 2. If voltage is >264V for a short time, wait for system to restore. 3. If persistent, contact local power supply. |
| Under Voltage | AC input voltage is too low | 1. Ask an electrician to measure the input voltage. 2. If voltage is <85V for a short time, wait for system to restore. 3. If persistent, contact local power supply. |
| Over Current | AC input current is too high | 1. Cut off power immediately. 2. Check charging plug for foreign objects and car's on-board charger for abnormalities. 3. Reconnect power supply; if fault persists, contact support. |
| Over TEMP | Charger internal temperature greater than 85°C | 1. Ensure no other heat-generating equipment nearby; ambient temperature below 50°C. 2. If problem persists, contact support. |
| Elec leakage | Leakage is greater than specified values (TypeA: AC20mA/30mA, TypeB: AC 30mA+DC 6mA) | 1. Cut off power immediately. 2. Check charging plug for foreign objects and car for electrical leakage. 3. Reset leakage protector, reconnect power; if fault persists, contact support. |
| Leakage self check | The sensor for detecting leakage is abnormal | 1. Cut off power immediately. 2. Check if output cable is broken or grounded. 3. Reconnect power; if fault persists, contact support. |
| PE Fault | Poor grounding or incorrect wiring | 1. Cut off power immediately. 2. Check if charging station is grounded properly. 3. Reconnect power; if fault persists, contact support. |
| Err:cp | Charging plug CC/CP connection abnormality | 1. Check if wiring of charging plug is correct. 2. Reconnect power; if fault persists, contact support. |
8.2. Resetting Wi-Fi Connection
If you experience issues with Wi-Fi connectivity, you can reset it:
- Long press the "T" button to enter the Menu.
- Press "A" to select "Settings", and then "D" to enter.
- Press "A" to select "Reset Wifi", then press "D" to confirm reset.

Figure 14: How to Reset Wi-Fi Connection
9. User Tips
- App Name: The official app for controlling the charger is "Tuya Smart" or "Smart Life". Search for these names in your app store.
- Current Adjustment: Note that the charging current cannot be adjusted while charging is actively in progress. Adjust it before starting a session.
- PDF Manual: For more detailed information and specific model variants (GBT, TYPE1, TS-NACS), refer to the comprehensive PDF user manual available at feyree Portable EV Charger User Manual (PDF).
- Compatibility: The charger is compatible with a wide range of EV brands.

Figure 15: Compatible EV Brands
10. Warranty and Support
10.1. Two-Year Warranty
feyree offers a two-year warranty to customers who have purchased an original feyree product.
10.2. Lifetime Technical Support
In case of any product-related issues, we encourage you to reach out to us, providing pictures and videos for further assistance.
10.3. Exclusions
The warranty does not cover:
- Any product damage resulting from failure to follow the recommended guidelines.
- Damage caused by unauthorized disassembly of the machine or seeking maintenance from a non-designated service center.
- Products not originally purchased from feyree.
- Any modifications or do-it-yourself alterations carried out without guidance from a licensed electrician.
10.4. Customer Service
For support, please contact us via email:
E-mail: tina@feyree.com
11. FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).