Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your PHYEE F7805C 1 DIN 4" CarPlay Car Radio. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Figure 1: PHYEE F7805C Car Radio
Video 1: Product demonstration showing CarPlay connection, map navigation, music playback, and UI customization.
Safety Information
Always observe the following safety precautions to prevent accidents or damage to the unit:
- Do not operate the unit in a way that distracts you from driving.
- Ensure all wiring is correctly connected to prevent short circuits or electrical hazards.
- Consult a professional for installation if you are unsure about any steps.
- Keep the unit away from water and excessive moisture.
- Do not attempt to disassemble or modify the unit.
Package Contents
The standard kit includes the following items:
- 1 x 1 Din Carplay Car Radio F7805C
- 2 x ISO Cables
- 1 x Car Radio User Manual
- 1 x Rear View Camera (optional, with 6-meter cable)
- 1 x Remote Control
- 1 x Kraft Packaging Box

Figure 2: Standard Package Contents
Product Overview
The PHYEE F7805C is a 1 DIN car radio featuring a 4-inch resistive touch screen. It supports wired Apple CarPlay and Android Auto, Bluetooth 5.1 for audio streaming and hands-free calling, FM radio, USB/TF card playback, and mirror link functionality. It also includes a rear camera input and steering wheel control compatibility.
Front Panel Functions

Figure 3: Front Panel Key Functions
- Power Button: Switch on/off, mute.
- MODE: Mode selection (Radio, PhoneLink, USB, BT, etc.).
- AMS/BAND: Band switching (FM1-FM2-FM3), automatic memory store.
- MUTE: Mute/unmute audio.
- Previous/Next Track: Navigate tracks or radio stations.
- CH+/CH-: Channel up/down, folder play.
- MIC: Built-in microphone.
- USB Ports: Two USB ports (one for data, one for charging).
- RES (Reset): Reset button.
- AUX: 3.5mm Aux-in slot.
- VOL (Volume Knob): Adjust volume, press for sound settings.
Rear Panel Connections

Figure 4: Rear Panel Jack Functions
- ISO Plug: Power plug/speaker plug.
- External Mic In: Input for external mono microphone.
- Video Out-1, Video Out-2: Video output ports.
- Video Input: Video input port.
- Reversing Camera Input: Input for rear view camera.
- Radio Antenna: Connection for car radio antenna.
- Rear USB Read: USB port for data reading (e.g., media playback).
- A-OUT-L, A-OUT-R: Left and Right channel audio outputs.
Setup and Installation
Before installation, ensure the vehicle's power is disconnected. It is highly recommended to have this unit installed by a qualified professional.
Dimensions

Figure 5: Product Dimensions (1 DIN size common)
The unit measures approximately 188mm (width) x 58mm (height) x 65mm (depth). Please verify these dimensions against your car's dashboard opening to ensure compatibility.
Wiring Diagram
Please use the car radio's original ISO cable. If using your car's existing ISO cable, carefully compare its pin functions with the provided diagram, as pin assignments can vary between different ISO cables.

Figure 6: ISO Plug Wiring Diagram
| Pin (A) | Function | Pin (B) | Function |
|---|---|---|---|
| A1 | Back In | B1 | Right Rear Speaker+ |
| A2 | Brake | B2 | Right Rear Speaker- |
| A3 | Key 1 | B3 | Right Front Speaker+ |
| A4 | Battery+ | B4 | Right Front Speaker- |
| A5 | Antenna | B5 | Left Front Speaker+ |
| A6 | ILL | B6 | Left Front Speaker- |
| A7 | Ignition Switch | B7 | Left Rear Speaker+ |
| A8 | Ground | B8 | Left Rear Speaker- |
Operating Instructions
Basic Controls
Refer to Figure 3 (Front Panel Key Functions) for button locations.
- Power On/Off: Press the power button (usually top left) to turn the unit on or off.
- Volume Adjustment: Rotate the VOL knob to increase or decrease the volume. Press the VOL knob to access sound settings.
- Mode Selection: Press the MODE button to cycle through available sources (Radio, PhoneLink, USB, BT, etc.).
- Mute: Press the MUTE button to silence the audio. Press again to unmute.
- Track/Station Navigation: Use the Previous/Next Track buttons to change songs or radio stations.
- Channel Selection: Use CH+/CH- buttons for radio channel selection or folder navigation in media playback.
CarPlay (Wired)
CarPlay allows you to integrate your iPhone with the car radio for navigation, calls, messages, and music.
- Connect your iPhone to the front USB port of the car radio using a data cable.
- The unit will automatically detect and launch CarPlay.
- Use the car radio's touch screen to interact with CarPlay applications.

Figure 7: CarPlay Interface
Note: CarPlay functionality is only available via the front USB port.
Android Auto (Wired)
Android Auto integrates your Android phone with the car radio for navigation, calls, messages, and music.
- Ensure your Android phone is running Android 6.0 or higher and has an active data cable connection.
- Connect your Android phone to the front USB port of the car radio using a data cable.
- The unit will automatically detect and launch Android Auto.
- Use the car radio's touch screen to interact with Android Auto applications.

Figure 8: Android Auto Interface
Note: Android Auto functionality is only available via the front USB port.
Mirror Link (PhoneLink)
Mirror Link allows you to mirror your smartphone screen (Android and iOS) onto the car radio display.
- Connect your smartphone to the car radio via USB cable.
- The unit may prompt you to install a specific app on your mobile phone. Follow the on-screen instructions.
- Once connected, touch control can be performed from both the phone and the car screen.
- After Bluetooth pairing, audio can be transmitted synchronously.

Figure 9: Mirror Link Functionality
FM Radio
The unit features a built-in FM radio module with stable signal reception.
- Press the MODE button to select FM radio mode.
- Use the CH+/CH- buttons to manually tune stations or seek automatically.
- The unit supports FM1-FM2-FM3 bands and can store up to 18 preset stations.

Figure 10: FM Radio Interface
Bluetooth 5.1
Connect your smartphone via Bluetooth for audio streaming (A2DP) and hands-free calling.
- Go to the Bluetooth menu on the car radio.
- Enable Bluetooth on your smartphone and search for available devices.
- Select "PHYEE F7805C" (or similar name) from the list and pair.
- Once paired, you can play music from your phone, make/receive calls, and access your phonebook.

Figure 11: Bluetooth 5.1 Connectivity
USB/TF Card Playback & Charging
- Insert a USB drive (max 32GB, FAT32 format) into one of the front USB ports or a TF card into the TF card slot.
- The unit will automatically detect and play compatible media files (MP3, FLAC, MP4, etc.).
- One of the front USB ports is dedicated for charging mobile phones.

Figure 12: USB Playback & Charging
Reversing Camera Input
When a compatible rear view camera is connected to the "Reversing camera input" on the rear panel, the unit will automatically display the rear view image when the vehicle is in reverse gear.

Figure 13: Reversing Video Assist
Steering Wheel Control (Learning Type)
The unit supports universal analog steering wheel controls. You can map the buttons on your steering wheel to control various functions of the car radio.
- Access the "Steering Wheel Control" settings in the unit's menu.
- Follow the on-screen instructions to program each steering wheel button by pressing it and then selecting the desired function on the car radio.

Figure 14: Steering Wheel Control Setup
Display and Audio Settings
- Backlight: The unit features 7 customizable backlight colors. These can be set to a fixed color or automatically transform.
- Screen Adjustment: Adjust brightness, contrast, hue, and saturation via the display settings menu.
- Audio EQ: Access the Audio EQ settings to customize bass, treble, balance, fader, loudness, and volume.

Figure 15: Customizable Backlight Colors

Figure 16: UI Interface Display Options
Maintenance
- Cleaning: Use a soft, dry cloth to clean the unit's screen and exterior. Do not use abrasive cleaners or solvents.
- Resistive Touch Screen: The screen is a resistive touch type. Apply gentle pressure with your finger or a stylus. Avoid using sharp objects that could damage the screen.
- Temperature: Avoid exposing the unit to extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Incorrect wiring, blown fuse, insufficient power. | Check power connections (A4, A7, A8). Verify vehicle fuse. Ensure stable 12V power supply. |
| No sound. | Mute activated, incorrect speaker wiring, volume too low. | Check mute status. Verify speaker connections (B1-B8). Increase volume. Check audio settings. |
| CarPlay/Android Auto not connecting. | Incorrect USB port, faulty cable, phone software issue. | Ensure using the front USB port. Use a high-quality data cable. Update phone OS. Restart phone and car radio. |
| Poor radio reception. | Antenna not connected, weak signal area. | Ensure antenna is securely connected. Try scanning for stations in a different location. |
| Steering wheel controls not working. | Not programmed, incompatible type. | Perform the steering wheel control learning process (see Operating Instructions). Ensure your car's controls are analog type. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | F7805C |
| Brand Name | PHYEE |
| Item Size | 1 DIN CarPlay Radio (188mm x 58mm x 65mm) |
| Display Size | 4" |
| Resolution | 800*480 |
| Touch Screen Type | Resistive touch screen |
| Voltage | 12 V |
| Out Power | 45W*4 |
| Radio Response Bandwidth | 87.5-108.0 MHz (FM) |
| Apple Carplay | Wired (front USB port only) |
| Android-Auto | Wired (front USB port only) |
| Bluetooth Part | Bluetooth A2DP, handsfree (BT 5.1 version) |
| Mirror Link | Supported |
| Multimedia Interface | 3 USB Ports (one for charging), TF card slot, Aux-in slot |
| Camera Input | Reversing camera input |
| Steering Wheel Control | Learning type supported |
| Lighting Color | 7 colors (red, green, blue, cyan, purple, yellow, white) |
| Panel Type | Fixed panel |
| OSD Language | Chinese, English, Spanish, German, French, Italian, Japanese, Portuguese, Russian, Polish, Turkish, Hebrew, Korean, Czech, Arabic |
| Item Weight | 0.6kg |
| Material | Metal and plastic |
| Certification | CE |
User Tips
- For optimal CarPlay/Android Auto performance, always use a high-quality, original USB data cable and connect to the front USB port. The rear USB port is for media playback only.
- If you experience issues with CarPlay/Android Auto, ensure your phone's operating system is up to date (Android 6.0+ for Android Auto).
- The screen is resistive touch, meaning it responds to pressure. A gentle press is sufficient; avoid using sharp objects that could damage the screen.
- Take advantage of the customizable 7-color backlight to match your car's interior lighting.
Frequently Asked Questions (FAQ)
- Q: What is the size of this car radio?
- A: It is a 1 DIN CarPlay Radio with a 4-inch display screen. Its dimensions are approximately 188mm (width) x 58mm (height) x 65mm (depth).
- Q: Does it support wireless Apple CarPlay or Android Auto?
- A: No, both Apple CarPlay and Android Auto are supported via a wired connection using the front USB port only.
- Q: Can I use the rear USB port for CarPlay or Android Auto?
- A: No, CarPlay and Android Auto functionality is exclusively available through the front USB port. The rear USB port is for media playback.
- Q: Is the screen touch-sensitive?
- A: Yes, it features a resistive touch screen.
- Q: Does it have an equalizer function?
- A: Yes, it has an Audio EQ setting for customizing bass, treble, and other sound parameters.
- Q: Is the front panel removable?
- A: No, the unit has a fixed panel.
Warranty and Support
The product comes with a 1-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact PHYEE Official Store customer service. Please have your product model (F7805C) and purchase details ready when contacting support.
PHYEE Official Store is committed to providing after-sales service and improving products based on user feedback.