1. Introduction
The Hantek TO1000 series represents a new generation of multi-functional, full touch screen oscilloscopes designed for portability and versatility. Featuring a thin, lightweight body, this device integrates an oscilloscope, multimeter, signal generator, and spectrum analyzer into a single, robust unit. Its unique hanging design, anti-falling, and anti-seismic features ensure durability, while the built-in large-capacity battery supports fast charging for extended use.
Video: Hantek TO1000 Series Product Overview, highlighting its compact design, multi-functionality, and robust build.
2. Key Features
- Multi-Touch Large Screen: Features an 800x480 resolution display with a friendly and easy-to-use UI for an excellent interactive experience.
- Integrated Functions: Combines a 4-channel oscilloscope, high-precision multimeter, arbitrary function signal generator, and spectrum analyzer.
- High Performance Oscilloscope: Up to 250MHz bandwidth (TO1254D), 1GSa/s maximum sampling rate, and 8M large storage depth.
- Advanced Multimeter: Offers data recording, storage, trend chart generation, and statistical analysis functions.
- Versatile Signal Generator: Built-in arbitrary waveforms with a highest output frequency of 25MHz (Note: W/O for TO1112, TO1112C models).
- One-Key Waveform Storage: Convenient and fast saving of waveforms.
- Durable Design: Suspension foot design allows for multi-angle adjustment, providing anti-falling and anti-seismic protection.
- Long Battery Life: Built-in super large capacity lithium battery for extended endurance, with standby time up to half a year.
- Fast Charging: Supports 18W Type-C fast charging, allowing shared charging equipment with mobile phones.
3. Package Contents
Upon opening your Hantek TO1000 series package, please verify that all the following items are included:
- Hantek TO1000 Series Oscilloscope Unit (x1)
- Protective Carrying Package (x1)
- Oscilloscope Probes (2Ch*1, 4Ch*2, quantity may vary by model)
- HT324 Alligator Clip Lines (2Ch*1, 4Ch*2, quantity may vary by model)
- 18W Charger, Type-C (x1)
- Multimeter Probe (Only for TO1000C/D Series)
- User Manual (This document)

Image: Visual representation of the Hantek TO1000 Series oscilloscope and its standard accessories.
4. Initial Setup
4.1 Charging the Device
- Locate the Type-C charging port on the side of the oscilloscope.
- Connect the provided 18W Type-C charger to the device and a power outlet.
- The charging indicator will illuminate. Allow the device to fully charge before first use for optimal battery performance. The device supports fast charging.

Image: Illustrates the device's long-lasting battery and fast charging capabilities via the Type-C port.
4.2 Powering On/Off
- To power on, press and hold the power button located on the device until the screen illuminates.
- To power off, press and hold the power button until a shutdown prompt appears on the screen, then follow the on-screen instructions.
4.3 Physical Placement and Stand
The Hantek TO1000 series features a unique suspension foot design for hands-free operation and multi-angle adjustment. Extend the kickstand from the back of the device to position it comfortably on a workbench or hang it for convenient viewing.

Image: Demonstrates the device's suspension foot design for stable and adjustable placement.
4.4 Connecting Probes
Connect the appropriate probes (oscilloscope probes, multimeter probes, or alligator clip lines) to the corresponding input channels (CH1, CH2, CH3, CH4) and the AFG output port as needed for your measurement task. Ensure secure connections.

Image: Rear view of the oscilloscope, indicating the AFG output and four channel input ports.
5. Operation
The Hantek TO1000 series features a multi-touch interface for intuitive control. The main screen provides access to various functions:

Image: The multi-touch screen interface, demonstrating the user-friendly UI and interaction.
5.1 Oscilloscope Function (OSC)
Select the 'OSC' icon from the main menu to enter oscilloscope mode. Here you can view and analyze waveforms across up to four channels. Adjust settings such as vertical scale, horizontal time base, and trigger conditions using the touch screen controls. The device supports 42 automatic measurement functions.
- Channel Selection: Tap on the channel indicators (CH1-CH4) to enable or disable channels.
- Vertical Scale: Pinch-to-zoom or use dedicated controls to adjust voltage per division.
- Horizontal Time Base: Pinch-to-zoom or use dedicated controls to adjust time per division.
- Trigger Settings: Configure trigger type, source, level, and slope to stabilize waveforms.
- One-Key Waveform Storage: Use the dedicated 'Save' function to quickly store current waveforms.

Image: The oscilloscope displaying multiple waveforms, illustrating its 4-channel capability and high sampling rate.
5.2 Digital Multimeter Function (DMM)
Tap the 'DMM' icon to access the digital multimeter. This function provides high-precision measurements for AC/DC voltage, current, resistance, capacitance, and diode tests. It also supports data recording, storage, trend charts, and statistical analysis.
- Measurement Selection: Choose the desired measurement type (V, A, Ω, F, Diode) from the on-screen menu.
- Probe Connection: Connect the multimeter probes to the V/Ω/C, COM, mA, or A input terminals as appropriate for your measurement.
- Data Logging: Utilize the data recording feature to capture measurements over time and generate trend charts for analysis.

Image: The digital multimeter interface showing real-time measurements and a trend chart.
5.3 Arbitrary Function Generator (AFG)
Select the 'AFG' icon to enter the arbitrary function generator mode. You can generate various waveforms, including sine, square, ramp, pulse, and arbitrary waveforms, with frequencies up to 25MHz. Adjust parameters like frequency, amplitude, offset, and phase.
- Waveform Selection: Choose the desired waveform type from the available options.
- Parameter Adjustment: Use the touch screen to set frequency, amplitude, offset, and phase.
- Output Connection: Connect your test circuit to the AFG output port on the rear of the device.

Image: The arbitrary function generator interface, showing waveform selection and parameter controls.
5.4 Spectrum Analyzer
The Hantek TO1000 series also integrates a spectrum analyzer function. Access this mode through the main menu to perform frequency domain analysis of signals. This allows for observation of signal components, harmonics, and noise levels.

Image: Overview of the integrated functions, including the spectrum analyzer.
6. Specifications
Below are the detailed specifications for the Hantek TO1000 series, including model-specific variations:
| Feature | TO1154D | TO1204D | TO1254D |
|---|---|---|---|
| Oscilloscope Channel | 4CH | 4CH | 4CH |
| Bandwidth | 150MHz | 200MHz | 250MHz |
| Sampling Rate | 1GSa/S | 1GSa/S | 1GSa/S |
| Storage Depth | 8M | 8M | 8M |
| Signal Source (AFG) | 25MHz | 25MHz | 25MHz |
| Multimeter | √ | √ | √ |
| Max Waveform Capture Rate | 30,000wfm/s | ||
| Display Resolution | 800*480 Pixels | ||
| Display Size | 7 Inches & Above | ||
| Battery Included | No (Internal, non-removable by user) | ||
| IS Battery Demountable | Yes (for service, not user-serviceable) | ||
| Certification | CE | ||
| DIY Supplies | Electrical | ||

Image: Comprehensive specification table for the Hantek TO1000 series.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. For stubborn dirt, a slightly damp cloth with mild detergent can be used, ensuring no liquid enters the ports.
- Storage: Store the oscilloscope in a cool, dry place away from direct sunlight and extreme temperatures. Use the provided protective carrying case when transporting.
- Battery Care: To prolong battery life, avoid completely discharging the battery frequently. Charge the device regularly, even if not in use, to maintain battery health.
- Probe Care: Handle probes with care. Avoid bending or stressing the cables excessively. Clean probe tips as needed.
8. Troubleshooting
- Device not powering on: Ensure the device is fully charged. Connect the Type-C charger and attempt to power on again.
- No waveform displayed: Check probe connections to the device and the circuit under test. Verify trigger settings are correctly configured. Adjust vertical scale and horizontal time base.
- Inaccurate multimeter readings: Ensure multimeter probes are correctly connected to the appropriate input terminals for the desired measurement. Calibrate the device if necessary (refer to advanced settings or contact support).
- Touch screen unresponsive: Try restarting the device. If the issue persists, ensure the screen is clean and free from debris.
9. User Tips
- Voltage Measurement: Yes, the integrated multimeter function covers voltage measurements (AC and DC). Ensure you select the correct mode and connect the probes appropriately.
- Portability: Take advantage of the device's lightweight and durable design. The kickstand and anti-shock corners make it suitable for field use.
- Multi-functionality: Explore all integrated functions (oscilloscope, multimeter, signal generator, spectrum analyzer) to maximize the utility of your device for various electrical testing needs.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the official Hantek customer service. Keep your purchase receipt as proof of purchase.