ATOTO AC-RCR01W

Contents

ATOTO AC-RCR01W 1080P Rear View Recording Camera User Manual

Model: AC-RCR01W | Brand: ATOTO

1. Introduction

The ATOTO AC-RCR01W is a 1080P Rear View Recording Camera designed to enhance your driving experience by providing a clear view of obstacles behind your vehicle and assisting with parking maneuvers. This camera features strong light suppression, Wide Dynamic Range (WDR), and automatic video recording capabilities.

ATOTO AC-RCR01W Rear View Recording Camera
Figure 1: ATOTO AC-RCR01W Rear View Recording Camera.

IMPORTANT: The AC-RCR01W is only compatible with selected ATOTO P8 series models. It is NOT compatible with other ATOTO products such as S8 series, F7 series, A6PF series, and SA102 series, or other brands.

2. Package Contents

Please check the package contents upon receipt to ensure all items are present and undamaged:

  • 1x Rear Camera (AC-RCR01W)
  • 1x Rear Camera Extension Cable (8 meters)
  • 1x USB Plug for Camera
Contents of the ATOTO AC-RCR01W package
Figure 2: What's in the Package - Rear Camera, 8m Extension Cable, and USB Plug.

3. Specifications

FeatureSpecification
ModelAC-RCR01W
Lens MaterialPlastic + Glass
Shell MaterialPlastic
Wire or WirelessWire
Angle of View150-degree (140° Viewing Angle)
Image Sensor1920x1080 1/2.7" CMOS
Lensf=2.0mm, F/NO 3.2
Length of Video Cable8m (also available in 2m, 6m, 10m options)
FeaturesAnti-Glare, Night-vision, WDR (Wide Dynamic Range), IP67 Waterproof, Strong Light Suppression, Auto-lock Videos
Guiding LineYes
Alarm TypeACCESSORIES, Rear Side
Icons representing 150 degree wide angle, strong light suppression, and HD 1080P features
Figure 3: Key features of the AC-RCR01W camera.

4. Compatibility

The ATOTO AC-RCR01W camera is specifically designed for use with ATOTO P8 series navigation systems. Ensure your P8 unit has the correct rear panel interface for compatibility.

Compatibility chart for ATOTO P8 series and MicroSD cards
Figure 4: Compatibility details for ATOTO P8 series and MicroSD card recommendations.

MicroSD Card Compatibility:

A MicroSD card (not included) is required for recording. The camera supports MicroSD cards up to 128GB. It is recommended to use a high-quality MicroSD card for reliable performance.

5. Installation

The camera connects via a USB-C plug, which is equipped with interfaces for both front and rear cameras. The rear camera is typically connected to the vehicle's backup light circuit.

Plug n Play installation diagram showing camera wiring to a car
Figure 5: "Plug n Play" installation overview, showing the camera, extension lead, and USB-C plug connection.

Wiring Connection:

  • Connect the rear camera to the backup light circuit. This ensures the camera activates automatically when you engage reverse gear.
  • The camera uses an 8-meter slim extension lead and a USB-C plug for connection to the ATOTO P8 navigation unit.

Mounting:

The compact design allows for secure mounting on or above the license plate. Ensure the camera has a clear, unobstructed view of the rear of the vehicle.

6. Power Supply

For continuous power supply to the P8 unit, an AC-P8AC12 accessory (sold separately) is required. When the P8 is continuously powered, the AC-RCR01W rear camera can capture critical video footage even when the vehicle is parked.

Parking Monitoring:

If a sudden collision or bump is detected, the P8 activates within seconds, and the AC-RCR01W rear camera captures 20 seconds of video footage. This footage is protected from being overwritten, serving as a reliable eyewitness in case of an accident while you are away. In standby mode, the camera's current consumption is less than 10mA, ensuring minimal power usage.

7. Key Features

  • Clear HD 1080P Display: The camera provides a high-definition 1080P backup view with a 150° wide viewing angle, allowing you to see the entire road and capture fine details like license plates and sidewalks.
    Diagram illustrating 150 degree wide viewing angle from the rear camera
    Figure 6: 150° Wide Angle view for comprehensive coverage.
    Comparison of 480P, 720P, and 1080P video quality from the rear camera
    Figure 7: Video quality comparison (480P, 720P, 1080P).
  • Automatic Recording: When a MicroSD card (up to 128GB) is inserted into the P8 unit, the camera automatically begins recording. Recordings are saved as backup information. The loop recording time is adjustable.
  • Strong Light Suppression: This feature helps to prevent dazzling effects from high beams or bright lights, ensuring clear video output on your display, even in challenging lighting conditions.
    Comparison of Strong Light Suppression in Daytime and Nighttime scenarios
    Figure 8: Strong Light Suppression in Daytime and Nighttime.
  • Wide Dynamic Range (WDR): WDR technology allows the camera to capture details in both very bright and very dark areas of a scene simultaneously, providing a balanced and clear image.
  • Auto Save Unusual Events (G-Sensor): A built-in G-sensor detects sudden changes in gravity, such as collisions. When triggered, videos of these events are automatically locked and saved as backup information, preventing them from being overwritten.

8. Operation

Accessing the Camera Interface:

From the P8 navigation unit's Home Page or Menu, tap the camera icon to enter the Camera Input and Recording page.

Basic Controls:

  • Toggle Camera View: Tap "F" and "R" on the screen to switch between the front camera view (if connected) and the rear camera view.
  • Recording: If an SD card (max. 128GB) is inserted, the cameras automatically start recording. The time mark in the upper right corner indicates recording duration. Recording restarts from 00:00 once the loop time is reached.
  • Take Picture: Tap the camera icon to take a picture with both the front and rear cameras.
  • Stop/Resume Recording: Tap the record icon to stop recording. Tap it again to resume.
  • Lock Videos: Tap the lock icon to lock the current videos (front and rear) to prevent overwriting.
  • View Recordings/Pictures: Tap the folder icon on the top of the screen to access lists of recorded videos and taken pictures. You can toggle between front and rear camera lists.
  • Additional Options: Tap the three-dot icon to unfold more options.

Camera Settings (DVR Adjust):

Access DVR Adjust via Settings -> Camera -> DVR Adjust.

  • Loop Time: Set the loop recording time for the DVR to 1, 2, or 3 minutes.
  • Parking Mode: This is a safety function under development. It will be available via system software upgrade.
  • G-Sensor Sensitivity: Adjust the sensitivity of the built-in gravity sensor (3 levels available) based on road conditions. A lower sensitivity is recommended for bumpy roads.
  • Format SD Card: Tap this option to format the inserted SD card. WARNING: Formatting will erase all previously stored files.

Rear-View Guidelines:

You can enable or disable rear-view guidelines in Settings -> Camera. If enabled, you can also adjust their position and angle to precisely guide your parking.

  • Toggle Mirror Image: Tap the mirror icon to switch between the original image and the horizontal mirror image.

9. Maintenance

  • Cleaning the Lens: Regularly clean the camera lens with a soft, lint-free cloth to ensure clear image quality. Avoid abrasive cleaners.
  • Cable Inspection: Periodically check the extension cable and connections for any signs of wear, damage, or corrosion.
  • Software Updates: Keep your ATOTO P8 navigation system's software updated to ensure optimal performance and access to new features, including future Parking Mode enhancements.
  • SD Card Management: Format your MicroSD card periodically (e.g., once a month) to maintain optimal recording performance and prevent data corruption. Remember to back up any important files before formatting.

10. Troubleshooting

  • No Image on Display:
    • Check all cable connections, especially the USB-C plug and the extension cable, to ensure they are securely connected.
    • Verify that the camera is correctly connected to the P8 navigation unit.
    • Ensure the P8 unit is powered on and functioning correctly.
  • Poor Image Quality:
    • Clean the camera lens.
    • Check for any obstructions blocking the camera's view.
    • Ensure the camera is properly mounted and stable.
    • Verify that the P8 display settings are configured for optimal resolution.
  • Recording Issues:
    • Ensure a compatible MicroSD card (up to 128GB) is inserted correctly into the P8 unit.
    • Format the MicroSD card if it's a new card or if you experience recording errors.
    • Check if the SD card is full; if so, back up and format it.
  • Parking Guidelines Incorrect:
    • Adjust the position and angle of the guidelines in the P8's camera settings.
    • Ensure the camera is mounted straight and level.

If you encounter persistent technical problems, please refer to the Warranty & Support section for assistance.

11. User Tips

  • USB-C Cable Adapter: The camera comes with a USB-C plug for connection. Ensure you have the correct USB-C cable adapter for your P8 unit's input to avoid compatibility issues.
  • Optimal SD Card: For best recording performance, use a high-speed MicroSD card (Class 10 or higher) with a maximum capacity of 128GB.
  • Regular Checks: Periodically check the camera's view and recording functionality, especially before long trips, to ensure it's operating correctly.

12. Warranty & Support

ATOTO provides comprehensive after-sales support to ensure your satisfaction with the product.

Online Resources:

You can access detailed operation videos and instructions by logging into the ATOTO after-sales website: resources.myatoto.com. Enter your product model to find relevant support materials available in 26 languages, including Russian, English, Spanish, French, and Portuguese.

After-sales website information and customer service contact details
Figure 9: Accessing ATOTO's after-sales website for support.

Technical Support:

If you encounter any technical problems during installation or use, please contact ATOTO customer service via email. They aim to reply within 48 hours. Many issues can be resolved through proper usage and understanding of the product. Professional installation is also an option.

Warranty Information:

The product comes with a complete warranty period, typically one year from the date of receipt of the car radio and accessories. You may also be able to register and extend the warranty for an additional six months via the customer service website. This warranty does not cover damage caused by accidents, unauthorized tampering or modification, incorrect installation, use of third-party accessories, or intentional/indirect damage.

Each item is double-tested before shipment. Please inspect the package before signing for delivery. If damaged, contact customer service immediately for solutions. Do not remove or damage the warranty stamp and serial number on the equipment.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.