1. Introduction
This manual provides essential information for setting up, operating, and maintaining your Xiaomi Redmi Note 8 or Redmi Note 8 Pro smartphone. Please read this guide thoroughly to ensure proper usage and to maximize the device's features. Note that the Redmi Note 8 and Redmi Note 8 (2021) models share the same appearance but differ in CPU and network specifications.

Figure 1: Xiaomi Redmi Note 8 / Note 8 Pro models.
2. Safety Information
- Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
- Use only approved chargers and accessories to prevent damage and ensure safety.
- Avoid dropping or subjecting the device to severe impact.
- Keep the device away from water and liquids, despite its splash-resistant coating.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
3. Package Contents
Ensure all items are present in your package:
- Xiaomi Redmi Note 8 or Note 8 Pro Smartphone
- Power Adapter (18W)
- USB Type-C Cable
- SIM Ejector Tool
- Protective Phone Case (Free Gift)
- Tempered Glass Film (Free Gift)
- User Manual (this document)
4. Device Layout
Familiarize yourself with the physical features and buttons of your smartphone:

Figure 2: Device components overview.
- Infrared (IR Blaster): Located at the top, used for controlling compatible home appliances.
- MIC: Microphones for calls and audio recording.
- SIM Card Slot: Located on the side, for Nano-SIM cards and Micro-SD card.
- Volume Button: Adjusts media and call volume.
- Power Button: Turns the device on/off, locks/unlocks the screen.
- Fingerprint Recognition: Located on the back for secure unlocking.
- Speaker: Audio output.
- USB Type-C: Charging and data transfer port.
- 3.5mm Jack: For connecting wired headphones.

Figure 3: Detailed views of the device.
5. Setup
5.1 Inserting SIM Cards and MicroSD Card
- Locate the SIM card tray on the side of the phone.
- Insert the SIM ejector tool into the small hole next to the tray and push gently until the tray pops out.
- Place your Nano-SIM card(s) and/or Micro-SD card into the designated slots on the tray. Refer to the diagram on the phone's back sticker for correct orientation (Nano-SIM+ (Nano-SIM/Micro-SD)).
- Carefully push the tray back into the phone until it clicks into place.

Figure 4: Removing the SIM tray.

Figure 5: SIM/MicroSD card placement instructions.
5.2 Initial Power On and Basic Setup
- Press and hold the Power button until the Xiaomi logo appears.
- Follow the on-screen instructions to select your language, region, and connect to a Wi-Fi network.
- Sign in with your Google account to access Google Play Store and other services.
- Complete the setup wizard to personalize your device.
6. Operating Instructions
6.1 Basic Navigation
- Touch Screen: Navigate through menus, open apps, and interact with content by tapping, swiping, and pinching.
- Buttons: Use the Volume buttons to adjust sound and the Power button to control screen state and power options.

Figure 6: Device in operation.
6.2 Camera Usage
Your device features a versatile quad-camera system on the rear and a high-resolution front camera.
- Main Camera (48MP): For high-resolution photos in various conditions.
- Ultra-wide Angle Camera (120°): Capture broader scenes without stepping back.
- Macro Camera (2cm auto focus): Discover intricate details of small objects.
- Depth Sensor: Enhances portrait mode with intelligent background blur.
- Front Camera (13MP): For selfies and video calls, optimized for day and night.

Figure 7: Ultra-wide angle camera in action.

Figure 8: Portrait mode for enhanced beauty.

Figure 9: Macro photography example.

Figure 10: Front camera performance.
6.3 Battery and Charging
The device is equipped with a 4000mAh high-capacity battery and supports 18W fast charging. Use the provided 18W charger and Type-C cable for optimal charging speed. A full charge can last up to two days under typical usage, and it can reach full charge in approximately 2 hours.

Figure 11: Battery and charging features.
6.4 Audio Features
The phone features 1217 super linear speakers for enhanced audio experience and a 3.5mm headphone jack for traditional audio connections.

Figure 12: Super linear speakers.
6.5 Biometrics and Other Features
- Fingerprint Recognition: Use the rear-mounted fingerprint sensor to quickly and securely unlock your device.
- Face Recognition: Unlock your phone using your face.
- IR Blaster: Control compatible infrared-enabled devices like TVs and air conditioners.
- FM Radio: Listen to FM radio stations using wired headphones as an antenna.

Figure 13: Key features for a smooth experience.
7. Maintenance
7.1 Cleaning Your Device
Use a soft, lint-free cloth to clean the screen and body of your phone. Avoid using harsh chemicals or abrasive materials that could damage the finish or screen coating.
7.2 Software Updates
Regularly check for and install system updates to ensure your device has the latest features, security patches, and performance improvements. You can usually find this option in the 'Settings' menu under 'About phone' or 'System update'.
7.3 Durability Features
Your device is built with durable Corning Gorilla Glass 5 on both the front and back, providing resistance against scratches and drops. It also features a splash-resistant nano-coating, offering protection against light rain and dust. However, it is not waterproof and should not be submerged in water.

Figure 14: Corning Gorilla Glass 5 protection.

Figure 15: Splash-resistant nano-coating.
8. Troubleshooting
- Device not turning on: Ensure the battery is charged. Connect the charger and wait a few minutes before attempting to power on again.
- Apps crashing or freezing: Try restarting the app. If the issue persists, clear the app's cache and data in Settings > Apps. As a last resort, uninstall and reinstall the app.
- Poor call quality/microphone issues: Check if anything is obstructing the microphone. Restart the device. If issues persist, contact support.
- Battery draining quickly: Reduce screen brightness, disable unnecessary background apps, and turn off Wi-Fi/Bluetooth when not in use.
- Network connectivity issues: Check if airplane mode is off. Restart the device. Try resetting network settings in Settings.
9. Specifications
Below are the technical specifications for the Xiaomi Redmi Note 8 and Redmi Note 8 (2021) models. Note that the specific model received may vary, primarily in chipset and operating system version.
| Feature | Redmi Note 8 | Redmi Note 8 (2021) |
|---|---|---|
| Item Condition | Refurbished | |
| Operation System | Android 9.0 (Pie), upgradable to Android 10, MIUI 12 | Android 11, MIUI 12.5 |
| Chipset | Qualcomm SDM665 Snapdragon 665 (11 nm) | MediaTek Helio G85 (12nm) |
| CPU | Octa-core (4x2.0 GHz Kryo 260 Gold & 4x1.8 GHz Kryo 260 Silver) | Octa-core (2x2.0 GHz Cortex-A75 & 6x1.8 GHz Cortex-A55) |
| GPU | Adreno 610 | Mali-G52 MC2 |
| Network Technology | GSM / HSPA / LTE | |
| 2G bands | GSM 850 / 900 / 1800 / 1900 - SIM 1 ; SIM 2 | |
| 3G bands | HSDPA 850 / 900 / 1700(AWS) / 1900 / 2100 | |
| 4G bands | 1, 2, 3, 4, 5, 7, 8, 20, 38, 40 (also 1, 3, 5, 8, 38, 40, 41) | 1, 2, 3, 4, 5, 7, 8, 20, 28, 38, 40 |
| Speed | HSPA 42.2/5.76 Mbps, LTE-A (4CA) Cat12 600/50 Mbps | HSPA 42.2/5.76 Mbps, LTE-A |
| Display Size | 6.3 inches | |
| Display Resolution | 2340x1080 (FHD) | |
| Screen Type | Fullview Display, 2.5D curved front glass | |
| Front Camera | 13MP (1 camera) | |
| Rear Camera | 48MP + 8MP (Ultra-wide) + 2MP (Macro) + 2MP (Depth) (4 cameras) | |
| Battery Capacity | 4000mAh (Not Detachable) | |
| Charging Power | 18W, Quick Charge 3.0 | |
| Charging Interface Type | Type-C | |
| 3.5mm Headphone Port | Yes | |
| SIM Card Quantity | 2 SIM Card (Nano-SIM + Nano-SIM/Micro-SD) | |
| Biometrics Technology | Fingerprint Recognition, Face Recognition | |
| Other Features | IR Blaster, FM radio, Splash-resistant nano-coating, Durable Corning Gorilla Glass 5 | |
| Wireless Charging | No | |
| NFC | No | |
| Language Support | Arabic, Polish, German, Russian, French, Korean, Norwegian, Portuguese, Japanese, Turkish, Spanish, Italian, English | |
| Origin | Mainland China | |
| Certification | CE | |
10. User Tips
- Verify Product Condition: Upon receiving your device, carefully inspect it to ensure it is in the expected refurbished condition and fully functional.
- Check Microphone: Test the microphone during a call or by recording audio to ensure it is working correctly.
- Confirm Memory Variant: Verify that the storage (e.g., 64GB, 128GB) and RAM (e.g., 4GB, 6GB, 8GB) of the received phone match your order.
- Utilize IR Blaster: Download a remote control app to take full advantage of the built-in IR Blaster for controlling home electronics.
11. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.