JUNCTEK KG-F Series

Contents

JUNCTEK KG-F Series Bluetooth Ammeter Battery Display Current Meter Coulomb Meter

User Manual

Model: KG-F Series | Brand: JUNCTEK

1. Introduction

The JUNCTEK KG-F Series voltage and current meter is an advanced coulomb meter designed to accurately measure various electrical parameters. This device can monitor voltage, current, power, charge and discharge Ampere-hour (AH) value, Watt-hours (WH), and time. It also features configurable protection functions such as over-voltage, under-voltage, over-current, over-power, over-temperature, and time-limit protection. The meter automatically identifies the direction of current flow and displays real-time battery capacity on a high-definition color LCD screen.

Video 1.1: Unboxing and overview of the KG-F Series components.

2. Key Features and Advantages

  • High-Definition Color LCD: The display module features a 2.4-inch high-definition color LCD screen for clear data visualization. Silicone buttons ensure smooth operation and fast response.
  • Automatic Current Direction Recognition: The product automatically detects and indicates current direction. Green color for charging current, blue for discharging current.
  • Wide Battery Compatibility: Suitable for various battery types including ternary lithium, lead-acid, and lithium phosphate batteries, provided they are within the voltage measurement range.
  • Pure Copper Shunt: The shunt and screws are constructed from pure copper, ensuring excellent electrical conductivity, minimal heat generation, and low power consumption, preserving battery life in standby mode.
  • Open-Source Communication Protocol: Utilizes 485 communication, allowing for secondary development with tools like serial port assistants. Supports control of up to 99 meters by switching communication addresses.
  • Mobile APP Control: Connect via Bluetooth to a dedicated mobile application. The APP allows viewing of all relevant data, real-time and historical curves, and configuration of all meter functions.
  • Data Logging and Export: The mobile APP supports viewing real-time and historical voltage and current curves, and enables exporting historical data for analysis.
  • Comprehensive Protection Functions: Configurable over-voltage (OVP), under-voltage (LVP), over-current (OCP), over-power (OPP), and external over-temperature (OTP) protections. When a parameter exceeds its set limit, the instrument's output state can be turned off (requires a relay) to prevent equipment damage. Protection recovery time and delay time are adjustable.
  • Self-Calibration Function: Includes a self-calibration feature to maintain accuracy of current and capacity values over extended periods of operation.
  • Flexible Data Management: Ampere-hour, Watt-hour, and time data can be cleared during measurement without affecting subsequent readings. Voltage and current values can be fine-tuned for precise capacity measurement.
Product Advantages: Accurate Measuring of Voltage, Current, Temperature, Power, Watt-hour, Ampere-hour, Remaining capacity, Endurance time, Charging time.

Image 2.1: Overview of accurately measured parameters by the KG-F Series meter.

Universal for a variety of batteries including lead-acid, lithium-ion, and used in applications like electric scooters, RVs, and electric vehicles.

Image 2.2: The KG-F Series meter is compatible with various battery types and applications.

Wireless Mobile App Control showing main display, settings, and curve viewing functions.

Image 2.3: Mobile APP interface for Bluetooth connection, remote operation, data recording, and curve display.

Comprehensive Protection shield graphic with OVP, LVP, OTP, OPP, OCP/NCP labels.

Image 2.4: Visual representation of the comprehensive protection features.

3. Package Contents

Please verify that all items listed below are included in your package:

Shipping List showing all components: Display Module, Measuring Module, Sampler, Sampler Mounting Plate, Temperature Sensor, 3P Terminal, 3m Communication Cable, 3P Connection Cable, 4P Connection Cable, Screws, Spacers.

Image 3.1: Visual representation of the package contents.

  1. Display Module x 1
  2. Measuring Module x 1
  3. Sampler (Shunt) x 1
  4. Sampler Mounting Plate x 1
  5. Temperature Sensor x 1
  6. 3P Terminal x 1
  7. 3m Communication Cable x 1
  8. 3P Connection Cable x 1
  9. 4P Connection Cable x 1
  10. Screw x 4
  11. Spacer x 4

4. Technical Specifications

ParameterKG105FKG110FKG140FKG160FKG610F
Sampling methodShuntShuntShuntShuntShunt
Voltage measurement range (External power supply)0-120V0-120V0-120V0-120V0-600V
Voltage measurement range (Self-powered)10-120V10-120V10-120V10-120V10-120V
Voltage resolution0.01V0.01V0.01V0.01V0.01A
Current measurement range0~50A0~100A0~400A0~600A0~100A
Current resolution0.01A0.01A0.1A0.1A0.01A
Relayoptional
Temperature measurement range-20-120℃
Capacity display range0%~100%
Power measurement range0~72KW
Power resolution0.01W
AH measurement range0~9999.99AH
Capacity resolution0.001AH
Watt-hour measurement range0~9999.99kWH
Watt-hour accuracy0.001WH
Time measurement range0~999:59:59S
Time resolution1 second
Bluetooth communication distance10m
Voltage accuracy±2%+3 characters
Current accuracy±5%+10 characters
Sampling rate1 time / second
Measuring module power consumptionAbout 0.4W
Display module power consumptionAbout 0.5W
Over power protection0-99999.99W
Negative overcurrent protection0~50A/100A/400A/600A
Forward overcurrent protection0~50A/100A/400A/600A
Overvoltage protection0~120V/600V
Undervoltage protection0~120V/600V
External over temperature protection0-120℃
Protection recovery time0-99s
Enter standby time0-60s
Delay time setting0-99S
Mailing addressThere are 99 P01-P99, P00 is the broadcast address
Dimensions of the measuring module (107.35mm x 60.36mm x 26.75mm) and shunt (122.09mm x 35.31mm x 26.35mm).

Image 4.1: Dimensions of the measuring module and shunt.

Product Connection Display showing the shunt with pure copper screws, spring coil, and nut for good conductivity and low power consumption.

Image 4.2: Details of the pure copper shunt construction.

5. Setup and Installation

5.1 Wiring Diagrams

Proper wiring is crucial for accurate measurement and safe operation. Refer to the diagrams below for connection instructions.

Self-Powered Wiring Diagram showing connections for battery, charger, load, and the measuring module. The display module is connected to the measuring module.

Image 5.1: Self-Powered Wiring Diagram. The measuring module draws power directly from the battery being measured.

External Power Supply Wiring Diagram and External Power Supply Wiring Diagram (Relay Control). These diagrams show how to connect the meter using an external DC 10-30V power source and how to integrate a relay for control.

Image 5.2: External Power Supply Wiring Diagram (top) and External Power Supply Wiring Diagram with Relay Control (bottom). Note: External power supply voltage should match the relay's working voltage (e.g., 12V or 24V).

5.2 Bluetooth APP Connection

  1. Download the official JUNCTEK APP from your mobile device's app store.
  2. Ensure your KG-F Series meter is powered on.
  3. Enable Bluetooth on your mobile device.
  4. Open the JUNCTEK APP and follow the on-screen instructions to search for and connect to your device.
  5. Once connected, you can view real-time data, historical curves, and configure settings remotely.

6. Operating Instructions

6.1 Display Overview

The 2.4-inch color LCD displays various parameters:

  • Voltage (V): Current voltage reading.
  • Current (A): Current flow. Green indicates charging, blue indicates discharging.
  • Power (W): Real-time power consumption/generation.
  • Ampere-hour (AH): Accumulated charge/discharge capacity.
  • Watt-hour (WH): Accumulated energy consumption/generation.
  • Time: Elapsed time of operation.
  • Temperature (°C): External temperature reading (if sensor connected).
  • Battery Percentage: Visual indicator of remaining battery capacity.

6.2 Button Functions

The display module features several buttons for navigation and setting:

  • SET: Enters the settings menu or confirms a setting.
  • UP/DOWN Arrows: Navigates through menu options or adjusts parameter values.
  • OK: Confirms selection or exits a menu.

6.3 Setting Protection Parameters

Access the settings menu using the 'SET' button to configure protection limits:

  • OVP (Over Voltage Protection): Set the maximum allowable voltage.
  • LVP (Low Voltage Protection): Set the minimum allowable voltage.
  • OCP (Over Current Protection): Set the maximum allowable forward current.
  • NCP (Negative Over Current Protection): Set the maximum allowable reverse (discharge) current.
  • OPP (Over Power Protection): Set the maximum allowable power.
  • OTP (Over Temperature Protection): Set the maximum allowable external temperature.
  • Protection Recovery Time: Time delay before the output automatically recovers after a protection event.
  • Delay Time Setting: Time delay for certain functions or protection triggers.

Use the UP/DOWN arrows to adjust values and SET/OK to confirm.

6.4 Clearing Data

To clear accumulated AH, WH, or time data, navigate to the relevant display screen or settings option and use the appropriate button combination (refer to the on-screen prompts or detailed manual for specific steps).

6.5 Self-Calibration

The meter includes a self-calibration function to maintain accuracy. Consult the detailed manual or APP interface for instructions on initiating and completing the self-calibration process. This may involve fine-tuning voltage and current values.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the display module. Avoid using abrasive cleaners or solvents that could damage the screen or casing.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.

8. Troubleshooting

  • No Display/Power: Check all power connections. Ensure the external power supply (if used) is within the specified voltage range (10-30V DC).
  • Inaccurate Readings: Verify all wiring connections are correct and secure, especially the shunt. Perform a self-calibration if available. Ensure the battery capacity setting in the meter matches the actual battery capacity.
  • Protection Triggered (e.g., OVP, LVP, OCP): Check the parameter that triggered the protection. Adjust the load, charger, or battery condition as necessary. Review and adjust the protection limits in the settings menu. If a relay is used, ensure it is functioning correctly.
  • Bluetooth Connectivity Issues: Ensure Bluetooth is enabled on both the meter and your mobile device. Make sure the meter is within the 10m communication range. Restart both the meter and your mobile device if connection problems persist.
  • APP Not Displaying Data: Confirm the meter is successfully connected via Bluetooth in the APP. Ensure the APP is up-to-date.

9. User Tips

  • Double-Check Wiring: Always verify your wiring against the provided diagrams before powering on the device to prevent damage.
  • Utilize the Mobile App: The mobile application offers enhanced control and data visualization, including real-time and historical curves. Use it to monitor performance and adjust settings conveniently.
  • Configure Protections: Take advantage of the comprehensive protection features (OVP, LVP, OCP, etc.) to safeguard your electrical equipment and batteries. Set these limits according to your specific battery and system requirements.
  • Regular Calibration: Although the device has a self-calibration function, occasional manual checks or recalibration can ensure long-term accuracy, especially after significant changes in your setup.

10. Warranty and Support

The JUNCTEK KG-F Series meter typically comes with a ONE-YEAR warranty from the date of purchase. For technical support, warranty claims, or further assistance, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty services.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.