1. Introduction
Thank you for choosing the AEVYVKV LED Ring Light. This manual provides essential information for the safe and efficient use of your RL-14, RL-18, or RL-21 series ring light. Please read these instructions carefully before use and retain them for future reference.
2. Package Contents
Upon opening your ring light package, please verify that all components are present and in good condition. The exact contents may vary slightly depending on the specific model (RL-14, RL-18, or RL-21) and chosen accessories.
Typical Package Contents:
- LED Ring Light (RL-14, RL-18, or RL-21)
- Carrying Bag
- Power Cord (EU/UK/US/AUS Plug, depending on region)
- Remote Control
- Phone Holders (typically 3)
- Hotshoe Holders (typically 3)
3. Setup Instructions
- Unpack Components: Carefully remove the ring light, power cord, remote control, and any included accessories from the carrying bag and packaging.
- Attach to Stand (if applicable): If your ring light came with a stand or you are using your own, securely mount the ring light onto the stand's mounting screw. Ensure it is stable before proceeding.
- Install Phone/Hotshoe Holders: Insert the phone holders and/or hotshoe holders into the designated screw holders on the ring light. Tighten them to secure your devices.
- Connect Power: Plug the power cord into the ring light's power input port, then connect the other end to a suitable electrical outlet (110V-240V). Ensure the correct plug type (EU/UK/US/AUS) is used for your region.
- Positioning: Adjust the ring light and stand to your desired height and angle for optimal illumination.
4. Operating the Ring Light
Power On/Off:
- Locate the ON/OFF switch on the ring light or its inline controller.
- Flip the switch to 'ON' to power on the light.
- Flip the switch to 'OFF' to power off the light.
Adjusting Brightness (Dimming):
- The ring light is dimmable with a range of 0%-100%.
- Use the dimmer control knob or buttons on the ring light or remote control to increase or decrease the light intensity.
Adjusting Color Temperature:
- The color temperature can be adjusted between 2700K (warm yellow) and 6500K (cold white), including mixed light options.
- Use the color temperature control knob or buttons on the ring light or remote control to cycle through or fine-tune the desired light color.
Using the Remote Control:
The included remote control allows for convenient adjustment of power, brightness, and color temperature from a distance. Refer to the remote control's markings for specific button functions.
USB Charging Ports:
The ring light features two USB ports (for RL-18 and RL-21 models) that can be used to charge electronic equipment such as smartphones. Note that charging cables for your devices are not included.
5. Maintenance and Care
- Cleaning: Ensure the ring light is powered off and unplugged before cleaning. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the ring light in its carrying bag in a cool, dry place away from direct sunlight and moisture.
- Handling: Handle the ring light with care. Avoid dropping it or subjecting it to strong impacts.
- Power Cord: Regularly inspect the power cord for any signs of damage. Do not use if the cord is frayed or damaged.
6. Troubleshooting
Light Does Not Turn On:
- Check if the power cord is securely plugged into both the ring light and the electrical outlet.
- Ensure the electrical outlet is functioning correctly by testing it with another device.
- Verify that the ON/OFF switch is in the 'ON' position.
Remote Control Not Working:
- Ensure there are no obstructions between the remote control and the ring light's sensor.
- Check if the remote control's batteries (if applicable) need replacement.
Light Flickers or Changes Brightness Unexpectedly:
- Check for loose connections in the power cord.
- Ensure the power source is stable.
- If the issue persists, power off the device, unplug it, wait a few minutes, and then plug it back in.
7. Specifications
The following specifications are typical for the RL-18 model. Specifications for RL-14 and RL-21 models will vary primarily in outer diameter and potentially total power/illumination.
| Feature | Specification |
|---|---|
| Brand Name | AEVYVKV |
| Model Numbers | RL-14, RL-18, RL-21 |
| Shape | Ring |
| Outer Diameter (RL-18) | 18 inch / 45cm |
| Total Illumination | 4800LM |
| Color | Black |
| Switch | OFF/ON |
| Wire (Plug Type) | EU/UK/US/AUS Plug |
| Input Voltage | 110V-240V |
| Total Power | 65W |
| USB Ports | 2 |
| Color Temperature | 2700K-6500K |
| Screw Holders | 3 |
| Dimmable | Yes |
| Hotshoe Holders | 3 |
| Dimming Range | 0%-100% |
| Lamp Remoter | Yes |
| Light Source | LED |
| Material | Aluminum Alloy + Plastic |
| CRI | Ra>95 |
| Light Color Options | Cold White, Warm Yellow, Mixed |
8. User Tips
- Charging Cables: Remember that while the ring light provides USB charging ports, the necessary charging cables for your electronic devices are not included.
- Control Board Issues: In case of issues with the control board (e.g., light not responding to controls), first try the troubleshooting steps. If problems persist, contact customer support for assistance.
9. Warranty and Support
For any product inquiries, technical support, or warranty claims, please contact the seller directly. You can reach out via WhatsApp at +86 19350856924 for further product information or assistance.
