Introduction
Thank you for choosing the Xiaomi Sound Move Bluetooth Speaker. This manual provides essential information on how to set up, operate, and maintain your speaker to ensure optimal performance and longevity. Please read this manual carefully before using the product.
The Xiaomi Sound Move Bluetooth Speaker, featuring Harman Kardon tuning.
Safety Precautions
To ensure safe and proper use of your Xiaomi Sound Move speaker, please observe the following precautions:
- Avoid exposing the product to extreme high or low temperatures, as this can affect its normal operation and lifespan.
- Do not charge the speaker underwater or in damp environments.
- Handle the product carefully to prevent drops or strong impacts that may damage internal components.
- Keep the speaker away from chemicals.
Package Contents
Please check the package for the following items:
- Xiaomi Sound Move Speaker (Host) × 1
- USB-C to USB-C Adapter Cable × 1
- Charging Adapter × 1
- User Manual × 1
Setup Guide
1. Initial Inspection
Before first use, carefully inspect the product and all its components to ensure there is no damage or looseness. If any issues are found, do not proceed with setup and contact support.
2. Charging the Speaker
Connect the speaker to the charging adapter using the provided USB-C to USB-C cable. The indicator light will flash green during charging and remain solid green once charging is complete. The speaker supports PD 3.0 protocol's 22W ultra-fast charging, providing up to 3 hours of usage in Bluetooth mode with just a 15-minute charge.
3. Powering On/Off
To power on or off the speaker, long press the power button for 3 seconds. A short press of the power button will enter or exit sleep mode.
4. Bluetooth Pairing
To pair your device via Bluetooth:
- Ensure the speaker is powered on and in Bluetooth mode.
- Long press the Bluetooth/Smart Mode button for 3 seconds to enter Bluetooth pairing mode. The indicator light will flash blue.
- On your mobile device (Android 4.4 or iOS 9.0 or above), search for available Bluetooth devices and select "Xiaomi Sound Move".
- Once connected, the indicator light will turn solid blue.
Bluetooth 5.3 with LHDC support for high-quality audio streaming.
5. Wi-Fi Network Connection (Smart Mode)
For intelligent features and smart home integration, connect the speaker to your Wi-Fi network:
- Ensure the speaker is powered on.
- Press and hold the microphone button for 3 seconds to enter distribution network mode. The indicator light will turn solid orange.
- Follow the instructions in the Xiao Ai Speaker APP to connect the speaker to your Wi-Fi network.
6. USB Sound Card Function
The speaker supports wired audio connection to a computer via a USB-C data cable. Connect the speaker to your computer using the provided USB-C cable to use it as an external sound source.
Operating Instructions
1. Key Descriptions and Functions
Detailed view of the speaker's controls and their functions.
| Button/Indicator | Action | Function |
|---|---|---|
| Microphone Button | Click | Turn off/on microphone |
| Press and hold for 3 seconds | Enter distribution network mode | |
| Play/Pause Button | Click | Play/Pause audio |
| Bluetooth/Smart Mode Button | Click | Switch between Bluetooth and Smart Mode |
| Long press for 3 seconds | Enter Bluetooth pairing mode | |
| Volume Down (-) | Click | Reduce Volume |
| Volume Up (+) | Click | Increase Volume |
| Volume Down (-) & Volume Up (+) | Simultaneously press and hold for 3 seconds | Restore factory settings |
| Power Button | Click | Enter/Exit sleep mode |
| Long press for 3 seconds | Power On/Off |
2. Intelligent Features (Xiao Ai Classmate)
The Xiaomi Sound Move speaker integrates with Xiao Ai Classmate, providing a smart assistant experience. In an uninterrupted indoor Wi-Fi environment, Xiao Ai can respond to voice commands for various tasks, including controlling over 5500+ smart devices on the IoT platform. You can set up "one sentence commands" in the Xiao Ai Speaker APP to execute multiple smart home control commands simultaneously.
Xiao Ai Classmate is ready to assist with indoor tasks and smart home control.
3. Multi-Speaker Playback
The Xiaomi Sound Move supports music interconnection for an immersive audio experience:
- **Stereo Combination**: Two Xiaomi Sound Move speakers can be combined to create left and right channels for a stereo effect. This function is primarily for music playback.
- **Whole House Playback**: Up to 8 Xiaomi Sound Move units can be combined for whole house playback. This feature is gradually being adapted for compatibility with other Xiaoai speakers. Check the Xiao Ai Speaker APP for specific supported models.
Immerse your home in high-quality sound with multiple speakers.
4. AirPlay 2 Support
The speaker supports AirPlay 2 for seamless audio streaming from Apple devices. AirPlay 2 allows for interstitial playback on iPhones, iPads, or iPod Touch with iOS 11.4 or higher, and Macs with MacOS Catalina or higher. Refer to Apple's official AirPlay 2 page for specific supported device models.
Maintenance and Care
- **Cleaning**: Regularly clean the speaker to maintain its condition. Use a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- **Chemicals**: Do not allow the speaker to come into contact with chemicals, as this may damage the finish or internal components.
- **Storage**: When storing the product, handle it carefully to prevent drops or strong impacts. Store in a cool, dry place away from direct sunlight.
- **Water and Dust Resistance**: The Xiaomi Sound Move has an IP66 rating, providing basic splash and dust prevention. This is not a professional underwater device. The anti-splash and dust performance may decrease over time with wear and tear. Do not charge the speaker in wet environments. Damage caused by water ingress is not covered by the warranty.
Troubleshooting
| Problem | Indicator Light Status | Possible Cause / Solution |
|---|---|---|
| Cannot pair Bluetooth | Blue flashing | Speaker is in pairing mode. Ensure your device's Bluetooth is on and searching. Long press the Bluetooth/Smart Mode button to re-enter pairing mode if needed. |
| Speaker not charging | No light / Red flashing | Check charging cable and adapter connection. Ensure power source is active. Red flashing indicates low battery. |
| System malfunction | Solid Red | Try restarting the speaker. If the issue persists, perform a factory reset (simultaneously press and hold Volume Down and Volume Up for 3 seconds). |
| Microphone unresponsive | Solid Pink | Microphone is disabled. Click the microphone button to enable it. |
| Cannot connect to network | Solid Orange | Speaker is in distribution network mode. Follow Xiao Ai Speaker APP instructions. Check Wi-Fi signal strength. |
| Audio/video out of sync (stereo mode) | N/A | When playing videos in stereo combination mode, out-of-sync issues may occur due to device and network conditions. This is normal behavior. |
| Xiao Ai function not working | N/A | The Miaobi function may be affected by network status. Ensure a stable Wi-Fi connection. |
| USB-C audio not working | N/A | Computer compatibility may affect the Type-C audio connection. Ensure your computer supports USB audio output via Type-C. |
Specifications
| Feature | Detail |
|---|---|
| Acoustic Unit | 2 x 1.75-inch full frequency speakers, 2 x passive radiators |
| Rated Power | 2 * 7.5W |
| Microphone | Supports remote field voice wake-up for 'Little Love Classmate' |
| Wi-Fi | IEEE 802.11 a/b/g/n 2.4GHz/5GHz dual frequency |
| Bluetooth | BT5.3, supporting LHDC music playback |
| USB Sound Card | Supports USB-C data cable wired connection to computer |
| Support System | Android 4.4 and iOS 9.0 or above |
| Battery Capacity | 4150mAh (typical value) |
| Input | 5V/3A, 9V/2.5A |
| Dimensions | 17.7cm x 5.55cm x 5.55cm |
| Weight | 568g |
| IP Rating | IP66 Dustproof and Waterproof |
| Sound Pressure | 90dB (from Xiaomi Acoustics Laboratory) |
| Frequency Response | 20kHz high-frequency extension (from Xiaomi Acoustics Laboratory) |
Compact design for portability: 17.7cm x 5.55cm x 5.55cm.
User Tips
- **Battery Saving**: If there is no operation or audio input in Bluetooth mode, the speaker will automatically enter sleep mode and shut down later to extend battery life.
- **Smart Mode Standby**: In intelligent mode, the maximum standby time after a full charge is 5.5 days. Actual standby time may vary with usage.
- **Customizing Xiao Ai Commands**: To use "one sentence commands" for smart home control, manually set them in the "Xiao Ai Speaker APP - Wake up and Dialogue - Wake up Response Tone" section.
- **Firmware Updates**: Regularly check the Xiao Ai Speaker APP for firmware updates to ensure your speaker has the latest features and performance improvements.
- **Sound Modes**: The speaker features Compute Audio 2.0 with a built-in G-Sensor to recognize placement posture, allowing for stereo sound horizontally and concentrated sound vertically. Experiment with placement to find your preferred sound profile.
Warranty and Support
For detailed warranty information, please refer to the official user manual PDF available at Xiaomi Sound Move User Manual (PDF). Please note that damage caused by water ingress is not covered under warranty.
For further assistance or technical support, please contact Xiaomi customer service.
Product Overview Video
Watch this video for a quick overview of the Xiaomi Sound Move speaker's features and design.
