Wuzhi Audio ZK-AS21

Contents

ZK-AS21 2.1 Channel TPA3255 Bluetooth Digital Power Amplifier Board Module User Manual

Model: ZK-AS21 | Brand: Wuzhi Audio

1. Introduction

The ZK-AS21 is a high-performance 2.1 channel Bluetooth digital power amplifier board module designed for audio enthusiasts. Featuring the advanced Texas Instruments TPA3255 power amplifier chip, it delivers high-definition sound quality with ultra-low distortion. This module provides a powerful output of 220W for each of the two main channels and 350W for the subwoofer channel, allowing for a rich and immersive audio experience. It supports multiple audio input methods including Bluetooth, AUX, and USB drive, and offers comprehensive control through both physical knobs and a dedicated Wuzhi Audio APP.

2. Features

  • High-performance TPA3255 power amplifier chip for Class D efficiency and high-end sound.
  • 2.1 Channel audio output: 2x 220W for main channels and 1x 350W for subwoofer.
  • Multiple audio inputs: Bluetooth 5.1, AUX, and USB flash drive/USB sound card.
  • Comprehensive tone regulation: Independent controls for subwoofer frequency and volume, and R&L channel treble and bass.
  • Mechanical volume knob with stepless tuning for precise control and durability.
  • Smart Protection features: Protection against reverse connection, undervoltage, overheating, overcurrent, and short circuit with automatic recovery.
  • Wuzhi Audio APP support for enhanced functionality:
    • Modify Bluetooth name and set password.
    • Adjust prompt tone volume and toggle on/off.
    • Custom 10-segment sound effects and various presets (Popular, Classical, Jazz, Country, Rock, Natural).
    • Lullaby function with 10 natural sounds and timed shutdown.
    • USB flash disk playlist management (select music, support shaking and cutting songs).
  • Six low noise preamplifiers (5532) for improved sound quality and 30dB gain.
  • Window tin spraying design on PCB for increased output power.

3. Specifications

ParameterValue
Product ModelZK-AS21
Power SupplyDC 16-38V / 10A (minimum)
Bluetooth Version5.1
Audio InputBluetooth + AUX + USB
Audio Output2.1 Channel (Left, Right, Subwoofer)
Voltage Gain30dB
Power OutputR&L Channels: 220W x 2; Subwoofer: 350W
Volume KnobStepless Tuning
SwitchMechanical Switch
Smart ProtectionReverse connection, undervoltage, overheating, overcurrent, short circuit (Automatic Recovery)
R&L Speaker Impedance3-8 Ω
Subwoofer Speaker Impedance2-8 Ω
Dimensions (L x W x H)141mm x 131mm x 27mm
Net Weight346g (approx. 408g with package)

Note: When the audio signal input is large enough and the power supply voltage/current is sufficient, there will be enough output power. The higher the power supply voltage, the greater the output power. The smaller the horn impedance, the greater the output power. Please ensure that the power of the adaptive power supply is greater than the actual working power of the power amplifier!

4. Package Contents

Upon opening the package, verify that all components are present and undamaged. The shell of the amplifier board requires self-assembly.

  • ZK-AS21 Amplifier PCB (Printed Circuit Board)
  • Upper Cover Board
  • Lower Cover Board
  • Knobs (5 pieces)
  • M2*4 Screws (4 pieces)
  • M2*5+4 Copper Pillars (4 pieces)
  • M2*18 Copper Pillars (4 pieces)
  • Screwdriver (for assembly)
ZK-AS21 Amplifier Package Contents
Figure 4.1: Typical package contents for the ZK-AS21 amplifier.

5. Setup & Installation

5.1 Assembly

The amplifier board comes unassembled and requires you to put together the protective casing. Follow the diagram below for proper assembly:

ZK-AS21 Amplifier Assembly Diagram
Figure 5.1: Assembly diagram for the ZK-AS21 amplifier board.
  1. Place the PCB onto the Lower Cover Board.
  2. Secure the PCB to the Lower Cover Board using the M2*5+4 copper pillars.
  3. Attach the Upper Cover Board to the assembly using the M2*4 screws.
  4. Install the five knobs onto their respective shafts on the front panel.

5.2 Wiring Connections

Carefully connect your speakers, power supply, and audio sources as shown in the diagram. Pay close attention to the polarity and type of terminals.

ZK-AS21 Amplifier Wiring Diagram
Figure 5.2: Detailed wiring diagram for the ZK-AS21 amplifier.
  • Power Input: Connect a DC 16-38V / 10A power supply to the 5.5x2.1 DC plug or the 2P terminal. Ensure correct polarity.
  • Speaker Outputs:
    • Subwoofer: Connect your subwoofer speaker to the "Subwoofer" terminals.
    • Left Channel: Connect your left main speaker to the "Left channel" terminals.
    • Right Channel: Connect your right main speaker to the "Right channel" terminals.

    WARNING: There is a clear distinction between the power input terminal and the horn (speaker) wiring terminal. Connecting the horn to the power terminal can burn out the horn and damage the amplifier.

  • Audio Inputs:
    • AUX Input: Use a 3.5mm audio cable to connect an external audio source (e.g., phone, PC) to the AUX input jack.
    • USB Flash Disk / USB Sound Card Input: Insert a USB flash drive for music playback or connect to a computer as a USB sound card.

5.3 External Antenna (Optional)

If you wish to use an external antenna for improved Bluetooth range, you will need to purchase an antenna and antenna base separately. Refer to the example below for welding instructions.

External Antenna Installation Example
Figure 5.3: Examples of antenna base and antenna welding for external antenna installation.

6. Operating Instructions

6.1 Power On/Off

The ZK-AS21 uses a mechanical switch integrated with the main volume knob. To turn the amplifier ON, rotate the MAIN VOLUME knob clockwise from its lowest position. To turn it OFF, rotate the MAIN VOLUME knob counter-clockwise until it clicks into the lowest position.

Mechanical Volume Knob for Power On/Off
Figure 6.1: The main volume knob also functions as the mechanical power switch.

6.2 Volume and Tone Control

  • MAIN VOLUME: Adjusts the overall output volume. This knob offers stepless tuning.
  • SUBWOOFER VOLUME: Controls the volume level of the subwoofer output.
  • SUBWOOFER FREQ: Adjusts the crossover frequency for the subwoofer (20-200Hz).
  • R&L CHANNEL TREBLE: Adjusts the high-frequency response for the left and right main channels.
  • R&L CHANNEL BASS: Adjusts the low-frequency response for the left and right main channels.
ZK-AS21 Amplifier Controls Layout
Figure 6.2: Front panel controls including volume, frequency, treble, and bass knobs.

6.3 Input Mode and Playback Control (Dial Wheel Button)

The dial wheel button located on the right side of the front panel provides control over input modes and music playback.

Dial Wheel Button Functions
Figure 6.3: Functions of the dial wheel button for mode switching and song control.
  • Short press the dial button in the middle: Pause/Play music.
  • Long press the dial button in the middle: Switch input mode (cycles through USB, Bluetooth, AUX).
  • Short press the dial button to the left: Previous song.
  • Long press the dial button to the left: Decrease volume.
  • Short press the dial button to the right: Next song.
  • Long press the dial button to the right: Increase volume.

6.4 Bluetooth Pairing

When the amplifier is in Bluetooth mode, it will automatically enter pairing mode. Search for "Wuzhi Audio" (or your customized Bluetooth name) on your device's Bluetooth settings and connect. If a password is set, enter it when prompted.

7. Wuzhi Audio APP Functions

The Wuzhi Audio APP provides advanced control and customization options for your ZK-AS21 amplifier. Download the official Wuzhi Audio APP from your device's app store.

7.1 APP Settings Interface

Wuzhi Audio APP Settings Interface
Figure 7.1: Screenshot of the Wuzhi Audio APP settings interface.
  • Bluetooth Name Modification:
    1. Enter a new Bluetooth name in the APP.
    2. Click the "Set" button.
    3. The system will automatically restart.
    4. Cancel pairing of your mobile device with the original Bluetooth name.
    5. Find and re-pair with the new Bluetooth name.
  • Bluetooth Password Setting:
    • Method 1 (Default): Turn on the Bluetooth password switch. The default password is "1111".
    • Method 2 (Custom): Turn on the Bluetooth password switch, enter your desired password, and click the "Setting" button. The system will restart automatically. Cancel pairing and you will be prompted to enter the new password when connecting again.
  • Prompt Tone Adjustment: Adjust the volume of system prompt tones to your preference.
  • Prompt Tone On/Off: Toggle the prompt tones on or off.
  • USB Flash Disk Playlist Function: Open the playlist of your USB flash disk, select music at will, and support features like shaking to skip songs or cutting songs.

7.2 APP Sound Effect Function

Wuzhi Audio APP Sound Effect Interface
Figure 7.2: Screenshot of the Wuzhi Audio APP sound effect adjustment interface.

The APP supports custom 10-segment sound effects, allowing arbitrary adjustment to compensate for deficiencies and achieve optimal sound for different speakers. Preset modes include Popular, Classical, Jazz, Country, Rock, Natural, and a Custom option.

7.3 Sleeping Music (Lullaby Function)

Wuzhi Audio APP Sleeping Music Function
Figure 7.3: Screenshot of the Wuzhi Audio APP sleeping music interface.

The APP includes a lullaby function with 10 kinds of natural sounds, offering up to 1023 sound combinations. These sounds are designed to create a natural atmosphere, calm your mood, and aid in deep sleep. The app is also equipped with a timed shutdown function for this feature.

8. User Tips

  • Power Supply Matching: Always ensure your power supply provides sufficient voltage (DC 16-38V) and current (at least 10A) to match or exceed the amplifier's actual working power. Insufficient power can lead to reduced output and performance issues.
  • Speaker Impedance: Match your speakers' impedance to the amplifier's specifications (R&L channels: 3-8 Ω, Subwoofer: 2-8 Ω) for optimal sound and to prevent damage.
  • DIY Gain Adjustment: For advanced users, the R and L resistors on the board can be modified to adjust the DIY gain. Exercise caution and consult with an expert if unsure.
  • Component Authenticity: Be aware of potential imitations. Wuzhi Audio uses specific golden electrolytic capacitors with their distinct logo. Ensure you are using genuine components for best performance.
  • APP Features: Explore the Wuzhi Audio APP for advanced features like custom sound effects and the lullaby function to enhance your listening experience.

9. Troubleshooting

  • No Power/No Indicator Light:
    • Check if the power supply is correctly connected and providing the specified voltage (DC 16-38V).
    • Ensure the main volume knob is rotated clockwise past the "off" position.
    • Verify the power adapter is functional.
  • No Sound Output:
    • Confirm speakers are correctly wired to the "horn wiring terminal" and not the power input terminal.
    • Check all audio input cables (AUX, USB) are securely connected.
    • Ensure the correct input mode (Bluetooth, AUX, USB) is selected using the dial wheel button.
    • Verify all volume knobs (MAIN, SUBWOOFER, TREBLE, BASS) are turned up.
    • If using Bluetooth, ensure the device is paired and connected.
  • Distorted Sound:
    • Reduce the input audio signal level from your source device.
    • Check if the power supply is sufficient and stable.
    • Ensure speaker impedance matches the amplifier's requirements.
    • Adjust the TREBLE and BASS knobs to a neutral position and re-evaluate.
  • Bluetooth Connection Issues:
    • Ensure the amplifier is in Bluetooth mode.
    • If a Bluetooth password is set, ensure the correct password is entered.
    • Try forgetting the device on your phone/PC and re-pairing.
    • Ensure no other devices are actively connected to the amplifier via Bluetooth.
    • If you changed the Bluetooth name via the APP, remember to re-pair with the new name.
  • Automatic Shutdown/Protection Activation:
    • The amplifier has smart protection against overheating, overcurrent, undervoltage, and short circuits. If it shuts down, check for these conditions.
    • Allow the unit to cool down if it's overheating.
    • Verify speaker wiring for any short circuits.
    • Ensure the power supply meets the voltage and current requirements.

10. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the amplifier. Avoid using liquid cleaners or solvents, as they may damage the components.
  • Environment: Keep the amplifier in a dry, well-ventilated area, away from direct sunlight, high temperatures, and excessive humidity.
  • Handling: Handle the amplifier board with care, especially during assembly or when making connections, to avoid damaging sensitive electronic components.
  • Power Off When Not in Use: Turn off the amplifier when not in use for extended periods to conserve energy and prolong its lifespan.

11. Warranty & Support

For specific warranty information, please refer to the terms and conditions provided by your retailer or contact the seller directly. Wuzhi Audio provides a dedicated APP for enhanced functionality and may offer support through this platform or their official channels.

For technical assistance or inquiries, please reach out to the seller or manufacturer's customer support.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.