FEKER IK65

Contents

FEKER IK65 Wireless Mechanical Keyboard User Manual

Model: IK65 | Brand: FEKER

Introduction

The FEKER IK65 is a customizable 65% layout RGB mechanical keyboard designed for versatility and a premium typing experience. It supports triple-mode connection (Wired, Bluetooth 5.0, and 2.4Ghz wireless) and features a Gasket Mount structure, hot-swappable switches, and a 4000mAh battery. This manual will guide you through the setup, operation, and maintenance of your keyboard.

Package Contents

  • 1 * FEKER IK65 Mechanical Keyboard
  • 1 * Type-C cable
  • 1 * 2.4G receiver
  • 1 * Keycap & Switches puller
  • 1 * Dustproof Cover
  • 1 * Manual
Image showing the FEKER IK65 keyboard and its accessories: Type-C cable, 2.4G receiver, keycap and switch puller, dustproof cover, and manual.

Figure: Package contents of the FEKER IK65 keyboard.

Setup

1. Initial Charging

Before first use, it is recommended to fully charge the keyboard. Connect the provided Type-C USB cable to the keyboard and a power source. The built-in 4000mAh battery supports 10W fast charging and can be fully charged in approximately 30 minutes.

Image showing the FEKER IK65 keyboard with a USB-C cable connected, highlighting the 4000mAh battery and wireless mode usage times.

Figure: Keyboard connected via USB-C for charging, illustrating battery life.

2. Connection Modes

The FEKER IK65 supports three connection modes: Wired, Bluetooth 5.0, and 2.4Ghz wireless. You can switch between multiple devices at will.

Image showing two FEKER IK65 keyboards, one connected via USB-C cable (wired mode) and another wirelessly, with Bluetooth and 2.4Ghz icons.

Figure: Illustration of the three connection modes: Wired, Bluetooth, and 2.4Ghz.

2.1. 2.4Ghz Wireless Connection

  1. Locate the 2.4G receiver included in the package.
  2. Plug the 2.4G receiver into an available USB port on your computer.
  3. Ensure the keyboard is in 2.4G mode (refer to the keyboard's physical switch or indicator).
  4. The keyboard should automatically connect.
Image showing the 2.4G receiver and a close-up of the keyboard's internal components, including Poron foam layers and switches.

Figure: The 2.4G receiver for wireless connection.

2.2. Bluetooth 5.0 Connection

  1. Ensure the keyboard is in Bluetooth mode (refer to the keyboard's physical switch or indicator).
  2. On your device (PC, laptop, tablet, smartphone), enable Bluetooth and search for new devices.
  3. Select "FEKER IK65" from the list of available devices to pair.

2.3. Wired Connection

  1. Connect the provided Type-C USB cable to the keyboard's port.
  2. Connect the other end of the cable to an available USB port on your computer.
  3. The keyboard will automatically switch to wired mode.

3. VIA Software Setup

The IK65 supports VIA for advanced key remapping and customization. It does not use a proprietary driver. To use VIA:

  1. Install the VIA upgrade package.
  2. Import the specific JSON file for the FEKER IK65. This file can be obtained from customer service after placing an order.
  3. Once the JSON file is imported, VIA will recognize the keyboard, allowing for deeper modification of key positions to adapt to your usage habits.

If you do not wish to use VIA, you can use the original driver for IK65 if available, or rely on the keyboard's default functionality.

Operating Instructions

1. Knob Function Customization

The knob on the FEKER IK65 can be customized using the VIA software. It can be configured to control functions such as:

  • Volume control (increase/decrease)
  • Play/Pause media
  • Other programmable functions via VIA

The keyboard now comes with a metal knob pre-installed, eliminating the need for separate replacement.

Close-up image of the FEKER IK65 keyboard's golden metal knob.

Figure: The pre-installed metal knob on the keyboard.

2. RGB Backlight

The keyboard features 16.8 million RGB backlight colors and supports various RGB modes, including Music Groove Mode. These modes can be switched to personalize your typing experience.

Image showing the FEKER IK65 keyboard with vibrant RGB backlighting, illustrating different color patterns.

Figure: Keyboard displaying RGB light effects.

3. Anti-Ghosting (NKRO)

The FEKER IK65 supports N-Key Rollover (NKRO), ensuring that every key press is registered accurately, even when multiple keys are pressed simultaneously. This provides a fast trigger and millisecond response, which is beneficial for gaming and fast typing.

Close-up of the FEKER IK65 keyboard keys with RGB lighting, emphasizing the anti-ghosting feature for fast trigger and millisecond response.

Figure: Anti-Ghosting feature in action.

4. Ergonomic Design

The keyboard features double foot support for multi-angle adjustment. This ergonomic design allows you to adjust the input angle according to your usage habits, reducing fatigue during long typing sessions.

Side view of the FEKER IK65 keyboard showing its adjustable feet for multi-angle adjustment.

Figure: Double foot support for ergonomic adjustment.

5. Internal Structure and Sound Profile

The IK65 utilizes a 4-layer filling material design to enhance its sound profile and typing feel. These layers include Poron Sandwich Foam, Ipex Foam, Poron Switches Foam, and Poron Bottom Foam. This construction effectively reduces noise generated during input, minimizes cavity sound within the keyboard, and contributes to a more pleasant typing sound.

Exploded diagram of the FEKER IK65 keyboard showing its internal layers: Cherry Profile Dye Sub Keycaps, Knob, Upper Covers, Lubed White Jade Switches, Gasket, T0 Stabilizer, PC Position Board, Poron Sandwich Foam, Ipex Foam, PCBA, Poron Switches Foam, Poron Bottom Foam, 4000mAh Battery, Bottom Cover, Non-slip Mat, TYPE-C/Wireless Switch, USB Receiver.

Figure: Exploded view of the keyboard's internal components and sound-dampening layers.

Maintenance

1. General Cleaning

  • Use a soft, lint-free cloth to wipe the keyboard surface.
  • For dust and debris between keycaps, use compressed air.
  • If necessary, remove keycaps using the provided keycap puller for deeper cleaning.

2. Switch Replacement (Hot-Swappable)

The FEKER IK65 features hot-swappable terminals, allowing you to change switches without soldering. It supports 3-pin or 5-pin mechanical switches (Cherry MX, Kailh, Gateron, etc.).

  1. Using the provided switch puller, gently grip the switch and pull it straight up to remove it.
  2. Align the pins of the new switch with the holes on the PCB.
  3. Press the new switch firmly into place until it clicks. Ensure the pins are not bent.
Image showing keycaps and switches being removed from the FEKER IK65 keyboard, highlighting the hot-swappable Kailh switch sockets.

Figure: Hot-swappable Kailh switches socket, supporting 3/5 pins.

3. Stabilizer Maintenance

The stabilizers on the FEKER IK65 are factory-lubed to eliminate noise and enhance consistency. Regular maintenance is generally not required, but if you notice any issues, you may re-lube them with appropriate lubricant.

Image showing the keyboard with keycaps removed from the spacebar and shift keys, revealing the factory-lubed stabilizers.

Figure: Factory-lubed stabilizers for enhanced typing experience.

Troubleshooting

  • Keyboard not responding: Ensure the keyboard is charged and properly connected (wired, 2.4G receiver, or Bluetooth paired). Try switching between connection modes.
  • VIA software not recognizing keyboard: Make sure you have installed the VIA upgrade package and imported the correct JSON file for the IK65. Contact customer service for the JSON file if you don't have it.
  • Intermittent wireless connection: Ensure the 2.4G receiver is securely plugged in or that Bluetooth is stable and within range. Avoid interference from other wireless devices.
  • Keys not registering: If specific keys are not working, try removing and re-inserting the switch for that key. If the issue persists, the switch may need replacement.
  • RGB lighting issues: Check the keyboard's manual or software for instructions on adjusting RGB modes and brightness. Ensure the keyboard is sufficiently charged.

Specifications

FeatureDescription
BrandFEKER
ModelIK65
Layout65% layout (67 Keys)
StructureGasket Mount
Position PlatePC (Polycarbonate)
SwitchesLubed FEKER White Jade Linear Switches V2 / Matcha Switches
Hot-swappableSupports 3/5-pin Mechanical Switches
KeycapCherry Profile, Dye-sublimation PBT plastic
Color OptionsBrown / White
Case MaterialPBT plastic
Filler LayersPoron Sandwich Foam, Ipex Foam, Poron Switches Foam, Poron Bottom Foam
ConnectionTriple Mode: USB Wired, Bluetooth 5.0, 2.4Ghz Wireless
Backlight16.8 Million RGB Backlit
Anti-GhostingNKRO (N-Key Rollover)
BatteryBuilt-in 4000mAh Rechargeable Li-ion Battery
CableDetachable Type-C USB Cable
CompatibilityMAC, Windows (above Win2000), iOS, Android
Dimensions (approx.)315mm (L) x 105mm (W) x 45mm (H)
Image showing the dimensions of the FEKER IK65 keyboard: 315mm length, 105mm width, 45mm height.

Figure: Keyboard dimensions.

Switch Specifications:

FEKER White Jade Switches V2 (Lubed)

  • Type: Linear
  • Initial Pressure: 30GF MIN
  • Trigger Pressure: 42±3GF
  • Total Travel: 3.6±0.3MM
  • Trigger Travel: 2.0MM±0.3MM
  • Spring: 20mm
  • Bottom Pressure: 47±5GF
  • Lifespan: 50 million clicks
Diagram illustrating the components of a FEKER White Jade Switch: Dustproof Stem, PC Upper Cover, Extension Spring, Metal Chip, and its specifications.

Figure: FEKER White Jade Switches V2 components and specifications.

Force Travel Diagram for White Jade Switches V2, showing Initial Pressure, Trigger Pressure, Total Travel, and Bottom Pressure.

Figure: Force Travel Diagram for White Jade Switches V2.

Matcha Switches

  • Type: Linear
  • Operating Force: 43±15gf
  • Pretravel: 2.0±0.4mm
  • Return Force: 62gf
  • End Force: 60±15gf
  • Total Travel: 3.5 +0/-0.3mm
Table of Product Parameters for Matcha Switch, including Type, Operating Force, Pretravel, Return Force, End Force, and Total Travel.

Figure: Matcha Switch parameters.

Product Features Overview

Icons representing key product features: Smaller and lighter, 45g Lubed White Jade Linear Switches, PBT Dye Sublimation, Support 5V/2A Quick Charge, PORON Foam, T0 Lubed Stabilizer, Wireless latency as low as 10ms, Support Via, Kailh Switches Socket.

Figure: Visual summary of key product features.

Bottom label of the FEKER IK65 keyboard showing model, battery capacity, supported systems, and certifications.

Figure: Keyboard bottom label with technical details.

Warranty and Support

Your purchase is covered by AliExpress assurance, which includes:

  • Safe payments: Payment methods used by many international shoppers.
  • Security & privacy: Your privacy is important to us, and your personal details are kept safe and secure.
  • Buyer protection: Get your money back if your order isn't delivered by the estimated date or if you're not satisfied with your order.
  • Free returns: Free returns are available within 90 days.

For specific support regarding the VIA JSON file or any other product-related inquiries, please contact the seller directly through the AliExpress platform.

Product Video

Video: Demonstration of the FEKER IK65 keyboard's typing sound and RGB lighting.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.