1. Product Overview
The ThinkRider Five Claws Mechanical Phone Holder is a robust and versatile accessory designed to securely mount your smartphone on various vehicles, including bicycles, motorcycles, and electric bikes. Constructed from CNC aluminum alloy with anti-slip silicone strips, it offers mechanical locking for stability and anti-shake performance. Its adjustable design accommodates a wide range of phone sizes and allows for 360° rotation for optimal viewing.

Image: ThinkRider phone holder securely mounted on a bicycle handlebar.
Video: Demonstration of the ThinkRider phone holder's installation and features.
2. Setup and Installation
Follow these steps to install your ThinkRider phone holder:
- Unscrew the fixing screws underneath the holder's base.
- Position the base on your vehicle's handlebar. Ensure it is placed securely.
- Tighten the screws to firmly attach the base to the handlebar.
- Double-check all fixing screws to ensure they are nice and tight for maximum stability.
- Once the holder is securely mounted, you can place your phone into the holder.
The holder is adjustable for handlebar diameters from 22.2mm to 31.8mm. Additional washers are included to increase the range of application and ensure a snug fit, especially for oval tube installations.

Image: Handlebar compatibility details, showing the base and washers for various diameters (22.2-31.8mm).
3. Operating Instructions
3.1 Securing Your Phone
The phone holder features a mechanical five-claw locking system designed for solid anti-shake performance. To secure your phone:
- Adjust the spiral telescopic stand to match your phone's width. It supports handsets from 55mm (not expanded) up to 95mm wide.
- Place your phone into the holder, ensuring all five claws firmly grip the device.
- The mechanical lock prevents the phone from falling due to vibration during your ride.

Image: The anti-shake five-claw lock securely holding a phone.

Image: The spiral telescopic stand, adjustable for phone widths up to 95mm.
3.2 Adjusting Viewing Angle
The phone holder features a flipping adjustable design with a convex back that snaps into place, preventing wobbling. You can rotate your phone 90°, 180°, 270°, or 360° to switch between horizontal and vertical screens as needed.

Image: The flipping adjustable mechanism allowing 360° rotation.
3.3 Unobstructed Access
The design includes multi-point control and pre-drilled holes to ensure no camera obstruction. You can record your ride or listen to music without blocking headphone ports.

Image: Phone mounted in holder, demonstrating clear access to camera and ports.
4. Maintenance
To ensure the longevity and optimal performance of your ThinkRider phone holder:
- **Cleaning:** Wipe the aluminum body with a damp cloth to remove dust and grime. Avoid abrasive cleaners.
- **Silicone Strips:** The embedded silicone rubber strips are removable for cleaning or replacement. Ensure they are properly seated to maintain anti-slip and non-scratch protection.
- **Rust Resistance:** The CNC aluminum body is anodized to resist rusting, requiring minimal maintenance in this regard.
- **Screw Tightness:** Periodically check all screws for tightness, especially after prolonged use or rides on rough terrain, to maintain secure mounting.

Image: Embedded silicone strip for anti-slip and non-scratch protection.

Image: Anodized aluminum surface, highlighting rust resistance.
5. Troubleshooting
If you encounter any issues with your phone holder, consider the following:
- **Phone not secure:** Ensure the spiral telescopic stand is adjusted correctly to the phone's width and that the five claws are fully engaged. Check if the silicone strips are in place.
- **Holder wobbles:** Verify that all installation screws are tightened securely to the handlebar. If using washers, ensure they are correctly positioned for a snug fit.
- **Difficulty rotating:** Check for any obstructions around the rotating mechanism. Ensure no debris is preventing smooth rotation.
For persistent issues, please refer to the Warranty and Support section.
6. Specifications
| Attribute | Detail |
|---|---|
| Brand | ThinkRider |
| Product Name | Five Claws Mechanical Phone Holder |
| Type | Bicycle Phone Mount |
| Material | CNC Aluminum Alloy + Silicone Rubber Strip |
| Weight | Approx. 108g |
| Dimensions | 10.2 cm * 8 cm |
| Applicable Phone Width | 55mm - 95mm |
| Applicable Handlebar Diameter | ≤ 31.8mm (22.2mm - 31.8mm with washers) |
| Capacity (Load) | 1kg |
| Features | Height and width increase, Mechanical locking, Width adjustment, Wide compatibility, Anti-shake, Anti-slip, Anodized surface, 360° rotation, Unobstructed camera/ports. |
| Origin | Mainland China |

Image: Detailed product information including dimensions and specifications.

Image: Compatibility with various models including road bikes, mountain bikes, electric bikes, electric motorbikes, and scooters.
7. User Tips
- Always ensure your phone is firmly secured in the five-claw lock before starting your ride.
- Adjust the viewing angle to avoid glare and ensure clear visibility of your screen while riding.
- For optimal stability, especially on rough terrain, periodically check and re-tighten the handlebar mounting screws.
8. Warranty and Support
For any warranty claims, technical support, or further inquiries, please contact the seller directly through the platform where you purchased the product. Keep your purchase records handy.
An official user manual in PDF format is available for download: View User Manual (PDF).