SAIMILI XKL-A4-36

Contents

SAIMILI XKL-A4-36 RGB 36 LED Stage Par Light Instruction Manual

Model: XKL-A4-36

Brand: SAIMILI

1. Introduction

The SAIMILI XKL-A4-36 RGB 36 LED Stage Par Light is a versatile lighting fixture designed for various events and venues, including DJ setups, discos, dance studios, weddings, Christmas parties, Halloween events, bars, KTVs, and general family entertainment. It features 36 high-brightness RGB LEDs, offering a wide range of mixed colors and dynamic lighting effects. This manual provides essential information for safe installation, operation, and maintenance of your LED Par Light.

SAIMILI XKL-A4-36 RGB 36 LED Stage Par Light with remote control

Figure 1: SAIMILI XKL-A4-36 RGB 36 LED Stage Par Light with remote control.

2. Key Features

  • Vibrant RGB Lighting: Equipped with 36 LEDs (12 Red, 12 Green, 12 Blue) for rich color mixing.
  • Multiple Control Modes: Supports DMX512, self-propelled (auto), sound-activated, and remote control.
  • Wide Voltage Compatibility: Operates on AC100~240V.
  • Efficient Cooling: Features a fan cooling system for stable performance.
  • Versatile Applications: Ideal for professional stage and DJ use, as well as home entertainment.
LED Par Light displaying various colors

Figure 2: The LED Par Light showcasing different color outputs.

3. Specifications

AttributeValue
Model NumberXKL-A4-36
Item TypeStage Lighting Effect
Power (W)10W-50W (Rated 45W)
VoltageAC100-240V
Power SourceDC
Lamp Beads36 (12 Red, 12 Green, 12 Blue) or 18x 1.5W (three in one)
ColorRGB Mixed Color
Luminous Flux249-2000
Control Channels9 Channels
Control MethodDMX512, Self-propelled, Voice Control, Remote Control
Cooling SystemFan Cooling System
Installation MethodSelf-contained
CertificationCE
OccasionProfessional Stage & DJ
OriginMainland China

4. Package Contents

Please check the package carefully upon receipt to ensure all items are present and in good condition:

  • 1 x SAIMILI XKL-A4-36 RGB 36 LED Stage Par Light
  • 1 x Remote Control
  • 1 x Power Cable
  • 1 x User Manual (this document)

5. Safety Information

To ensure safe operation and prolong the lifespan of your device, please read and follow these safety precautions:

  • Always connect the device to a grounded power outlet.
  • Do not expose the device to rain or moisture.
  • Ensure proper ventilation; do not block the cooling fan or vents.
  • Avoid direct eye exposure to the light source.
  • Disconnect from power before cleaning or servicing.
  • Do not attempt to repair the device yourself. Refer all servicing to qualified personnel.
  • Keep the device away from flammable materials.

6. Setup and Installation

The XKL-A4-36 LED Par Light is designed for self-contained installation, meaning it can be placed on a flat surface or mounted using its adjustable bracket.

6.1 Physical Placement

  • Place the light on a stable, flat surface, or securely mount it to a truss or ceiling using appropriate clamps and safety cables (not included).
  • Ensure there is adequate space around the unit for ventilation.
  • Adjust the bracket to direct the light as desired.

6.2 Power Connection

  • Connect the provided power cable to the power input port on the back of the unit.
  • Plug the other end of the power cable into a standard AC100-240V grounded power outlet.

6.3 DMX Connection (Optional)

For DMX control, connect a DMX controller to the DMX IN port using a 3-pin DMX cable. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on.

Diagram of the LED Par Light's back panel showing control panel, DMX ports, and ventilation

Figure 3: Back panel overview with control panel, DMX ports (DMX IN/OUT), and ventilation/cooling port.

7. Operating Modes

The XKL-A4-36 LED Par Light offers several operating modes, which can be selected via the control panel on the back of the unit or using the remote control.

7.1 Control Panel

The control panel features a digital display and four buttons (Menu, Up, Down, Enter) for navigating settings and selecting modes.

  • Menu: Cycles through main menu options.
  • Up/Down: Navigates through sub-menus or adjusts values.
  • Enter: Confirms selection or saves settings.

7.2 Self-Propelled (Auto) Mode

In this mode, the light will automatically cycle through various pre-programmed color changes and effects. Select "Auto" or a similar option from the control panel menu.

7.3 Sound-Activated Mode

The light will react to ambient sound or music, changing colors and patterns in sync with the beat. Select "Sound" or "Voice Control" from the control panel menu or press the "SOUND" button on the remote.

7.4 DMX512 Mode

This mode allows professional control over the light's functions using an external DMX controller. The light uses 9 DMX channels. Refer to the DMX Channel Chart for detailed functions.

  • Set the DMX address for each unit using the control panel.
  • Ensure DMX cables are correctly connected (DMX IN/OUT).

8. Remote Control Functions

The included remote control provides convenient access to various functions:

Remote control for the LED Par Light

Figure 4: Remote control for the SAIMILI XKL-A4-36 LED Par Light.

  • SOUND: Activates Sound-Activated mode.
  • CC: Likely cycles through color change programs.
  • PL: Likely cycles through pre-set programs or patterns.
  • RB: Likely for Red/Blue color selection or specific color modes.
  • SAVE: May save current settings or a custom color.
  • DMX: Switches to DMX control mode.
  • 0-9 Buttons: Used for selecting specific programs, DMX addresses, or adjusting values.
  • Power Button: Turns the light ON/OFF.

Note: Specific functions of some buttons (CC, PL, RB, SAVE) may vary slightly depending on the firmware version. Experiment to understand their exact behavior.

9. DMX Channel Chart (9 Channels)

This section outlines the DMX channel assignments for the XKL-A4-36 LED Par Light. Connect your DMX controller and refer to this chart for precise control.

ChannelFunctionValue RangeDescription
CH1Master Dimmer0-255Overall brightness control (0 = Off, 255 = Full Brightness)
CH2Red Intensity0-255Adjusts the intensity of the Red LEDs
CH3Green Intensity0-255Adjusts the intensity of the Green LEDs
CH4Blue Intensity0-255Adjusts the intensity of the Blue LEDs
CH5Strobe Speed0-255Strobe effect speed (0 = No Strobe, 255 = Max Speed)
CH6Color Macro / Auto Programs0-255Selects pre-programmed color macros or auto-run programs
CH7Auto Program Speed0-255Adjusts the speed of selected auto programs
CH8Sound Sensitivity0-255Adjusts sensitivity for Sound-Activated mode
CH9Mode Selection0-255Selects between DMX, Auto, Sound, or Master/Slave modes

10. Maintenance

Regular maintenance helps ensure optimal performance and longevity of your LED Par Light.

10.1 Cleaning

  • Periodically clean the lens and housing with a soft, lint-free cloth.
  • Do not use abrasive cleaners or solvents.
  • Ensure the fan and ventilation openings are free from dust and debris. Use compressed air if necessary.

10.2 Storage

  • When not in use, store the light in a dry, dust-free environment.
  • Keep it away from extreme temperatures and humidity.

11. Troubleshooting

If you encounter issues with your LED Par Light, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No power / Light does not turn onPower cable not connected, faulty outlet, power switch off.Check power cable connection, try a different outlet, ensure power switch is ON.
No light output in DMX modeIncorrect DMX address, faulty DMX cable, DMX controller issue, light not in DMX mode.Verify DMX address, check DMX cable, ensure DMX controller is sending signals, set light to DMX mode.
Remote control not workingDead battery, obstruction, out of range.Replace remote battery, ensure clear line of sight to the light's IR receiver, operate within effective range.
Sound-activated mode not respondingLow sound input, microphone blocked, sensitivity too low.Increase music volume, ensure microphone is clear, adjust sound sensitivity via control panel or remote.

12. User Tips

  • The light comes with a remote control for convenient operation, allowing you to switch modes and adjust settings from a distance.
  • For best sound-activated effects, place the light near the sound source or ensure the microphone is not obstructed.
  • Experiment with different DMX channel values to discover the full range of lighting effects and color combinations.

13. Warranty and Support

For any technical assistance, warranty claims, or further inquiries, please contact your retailer or the manufacturer's customer support. Keep your purchase receipt as proof of purchase.

14. Product Video

Video 1: Demonstration of the LED Par Light's color changing capabilities and effects.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.