1. Introduction
The VDIAGTOOL BT310 is a versatile 12V and 24V car battery tester designed to provide quick and accurate analysis of various automotive battery types. It performs battery capacity tests, cranking tests, and charging system tests, offering essential insights into your vehicle's battery health and electrical system performance. With its user-friendly interface and multi-language support, the BT310 is an indispensable tool for both professional mechanics and DIY enthusiasts.

Figure 1: VDIAGTOOL BT310 Car Battery Tester
2. Key Features
- Supports 12V/24V batteries: VRLA, AGM flat plate, AGM spiral, SLA, gel batteries, etc.
- Performs Battery Capacity Test, Cranking Test, and Charging Test.
- Provides accurate results in milliseconds.
- Analyzes battery life and health percentage (SOH).
- Analysis results: Good, Recharge, or Replace.
- Features 3 LED indicators (Good, Normal, Poor) for immediate battery status.
- Lifetime free software updates and PC printing.
- Supports 14 languages: English, German, Italian, French, Spanish, Portuguese, Hungarian, Polish, Slovak, Czech, Russian, Dutch, Swedish, Japanese.
- High accuracy: >99.5% with powerful and smart chip.

Figure 2: Overview of BT310 Key Features
3. Package Contents
Ensure all items are present in the package:
- 1x VDIAGTOOL BT310 Car Battery Tester
- 2x Full copper core Kelvin clips (red and black)
- 1x User Manual

Figure 3: BT310 Package Contents
4. Setup and Connection
Follow these steps to connect the BT310 to your vehicle's battery:
- Ensure the vehicle's ignition is off and all accessories are turned off.
- Locate the vehicle's battery.
- Connect the red Kelvin clip to the positive (+) terminal of the battery.
- Connect the black Kelvin clip to the negative (-) terminal of the battery.
- The BT310 tester will power on automatically once connected correctly.

Figure 4: Connecting the BT310 to a Car Battery
5. Operating Instructions
The BT310 offers several testing modes accessible via the main menu. Use the "BACK" and "ENTER" buttons, along with the arrow keys, to navigate.
5.1. Main Menu Options
- 1. BATTERY CAPACITY: Tests the overall health and capacity of the battery.
- 2. CRANKING TEST: Evaluates the vehicle's starting system.
- 3. CHARGE SYSTEM: Checks the alternator's charging performance.
- 4. LANGUAGE SET: Allows changing the device language.
- 5. ABOUT: Displays device information.
5.2. Battery Capacity Test
This test determines the condition of the battery based on its rated value (CCA) and calculates its State of Health (SOH). The tester will display the voltage, CCA, SOH, internal resistance (Ω), and a recommendation.
- From the Main Menu, select "1. BATTERY CAPACITY" and press ENTER.
- Follow the on-screen prompts to input the battery's CCA rating.
- The tester will perform the analysis and display the results.
- A recommendation (Good, Recharge, or Replace) will be provided.

Figure 5: Battery Capacity Test Display
5.3. Cranking Test
The Cranking Test evaluates the alternator's starting voltage to determine if it's weak or normal.
- From the Main Menu, select "2. CRANKING TEST" and press ENTER.
- The tester will prompt you to start the engine.
- Start the vehicle's engine.
- The tester will display the cranking time and voltage.
Video 1: Demonstration of Cranking Test and Language Setting
5.4. Charging Test
This test checks the alternator's continuous output to ensure it provides proper power to the battery and electrical system.
- From the Main Menu, select "3. CHARGE SYSTEM" and press ENTER.
- Follow the on-screen instructions, which may include revving the engine.
- The tester will display the charging system's performance, including loaded and unloaded voltage, and ripple.
5.5. Language Setting
The BT310 supports 14 languages. To change the language:
- From the Main Menu, select "4. LANGUAGE SET" and press ENTER.
- Use the arrow keys to scroll through the available languages.
- Press ENTER to select your desired language.

Figure 6: Multi-language Support
6. Troubleshooting and LED Indicators
The BT310 features three LED indicators to provide immediate feedback on battery status:
- Green LED (GOOD): The battery is in good condition and ready for use.
- Yellow LED (NORMAL): The battery status is normal, and it may continue to be used, but monitoring is advised.
- Red LED (POOR): The battery is in poor condition. Please replace it in time.
If the tester displays "CRANKING LOW" during the Cranking Test, it indicates a weak starting system or battery that may need attention.

Figure 7: LED Indicators for Battery Status
7. Specifications
| Feature | Description |
|---|---|
| Brand Name | VDIAGTOOL |
| Model Type | Battery Tester |
| Certification | CE |
| Voltage Measuring | 9V ~ 36V |
| Supported Battery Types | VRLA Batteries, AGM flat plate, AGM spiral, SLA batteries, gel batteries, etc. |
| Battery Rating Range | 100CCA ~ 2000CCA |
| Standards Supported | CCA, JIS, DIN, IEC, EN, GB |
| Operation Temperature | 0°C ~ 60°C (-4°F ~ 140°F) |
| Storage Temperature | 0°C ~ 70°C (-4°F ~ 158°F) |
| Languages | English, German, Italian, French, Spanish, Portuguese, Hungarian, Polish, Slovak, Czech, Russian, Dutch, Swedish, Japanese (14 languages) |
| Accuracy | >99.5% |
8. Maintenance
To ensure the longevity and accurate performance of your VDIAGTOOL BT310 Car Battery Tester, follow these maintenance guidelines:
- Keep the device clean and dry. Wipe with a soft, damp cloth if necessary. Do not use abrasive cleaners or solvents.
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspect the Kelvin clips and cables regularly for any signs of damage, wear, or corrosion. Replace if necessary.
- Ensure the clips are clean before each use to maintain good electrical contact.
- Avoid dropping the device or subjecting it to strong impacts.
9. Warranty and Support
The VDIAGTOOL BT310 Car Battery Tester comes with a 2-year warranty. VDIAGTOOL is committed to providing excellent customer service and product support.
- Warranty: 2 Years
- Software Updates: Lifetime Free Update
- Technical Support: Lifetime Free Support
For technical assistance, warranty claims, or general inquiries, please contact VDIAGTOOL through the following channels:
- Website: www.vdiagtool.com
- Email: vdiagtool@outlook.com